The aim of our study is to ascertain whether a hanging suspension fluorescentlamp for a private home environment is going to be attractive for a largeaudience. We want to open up for new uses of fluorescent lamps as lightsources.The main approach in this work is how to design a fixture with fluorescentlamps as a light source that will meet the requirements and requests of thehome environment could look like. At the same time we want to make a newimpression of how a fluorescent light source.Primarily we used a quantitative method, but this was rejected after a pilotstudy. Instead we used a qualitatively based method in the sense that weconducted a group interview as well as individual interviews.Based on data from the interviews and our preliminary work a prototype wasbuilt. This prototype is a fluorescent fixture equipped with 2x14W T5fluorescent lamps, dimmed separately.

The fitting room is an important part of a clothing store, it's often where the customer decides if they want to buy the garment or not. Therefore it is important that the customer can feel safe and comfortable when they are trying the clothing. A typical fitting room in Sweden today has only one bright spotlight that emits light either towards the face or from the Ceiling above. This study explores possible lighting solutions that take into account the customer's experience in the fitting room.The study aim to increase understanding of the importance of a good light in fitting rooms, so that customers gets a nice experience and that clothes, body shape and facial features are shown in a natural way. The issue therefore included how lighting can affect the customer's perception of the clothing and how the perception of body shape, facial features and the clothes change in different lighting solutions.To answer these questions, observations were made in various clothing stores, followed by an experimental study divided into two parts.

With the ambitions to rehabilitate individuals with different kinds of work disabilities through work, the government owned Samhall AB has a long history as labour market measure in Sweden.To show Samhall AB its importance, the company has requirements to fulfill the goal that around 5 percent of their employees, at Samhall AB, every year shall be transferred to an employment outside the company, which is called transition. Unfortunately since this goal was introduced it also created several dilemmas. One dilemma is the long lasting female under representation in transitions from Samhall AB to the regular labour market.The essays main task is to investigate the factors behind the female under presentation in transition from Samhall AB through a genus perspective and by using quantitative and qualitative method.The main conclusions are that female under representation in transitions from Samhall AB are basically caused by structural factors. Samhall AB?s strong industrial tradition and particularly the strong segregation between female and males on the regular Swedish labour market may inhibit females in their transitions.

The aim of this Master's thesis is to explore how the localisation and the design affect the conditions for a school-media centre. A school-media centre is in this study a place where the students seek, find and evaluate information, discuss and exchange ideas. An active place for generating knowledge. The method applied in this study is "Space Syntax Analysis", a quantitative method with visual representation of the results. In the theoretical framework, space is the voids between walls, doors and Ceiling, between furniture and bookshelves.

This report describes a project, which was carried out as a final thesis covering 30 ECTS during the final semester of the Master of Science programme Industrial Design. The assignment was issued by Fagerhults Belysning AB in Habo. The assignment was to design a family of products in which LED was to be used as a source of light. The main focus in the initial part of the project was to find a way to design the inside of armature which was suitable for LED technology. An armature, already in the range of products at Fagerhult, with the desired qualities that was to be strived after was the Zintra. The lighting source of the Zintra is a compact fluorescent lamp.

The main purpose of this thesis has been to address the problem connected with conservation ofspecific objects in historic buildings that have a protected building status. The immaterial demandsand environmental concerns of a place of cultural significance are discussed as opposed to the welladaptedsetting of a museum, with regard to long-term preservation. In an authentic interior of acertain era, large-scale individual treatments of the objects that define it and regulations forconservation-related reasons, may not be considered a worth-while effort, as it is often the integrityof the environment as a whole that has been declared as significant. To investigate the relationshipbetween object and its context, a case study has been conducted by examination of the propertycalled ?Curmans villor?, located in the seaside community called Lysekil.

Today there is an increasing market for businesses concerning horses, and since we are already running such establishments we sort of speak already have a finger in the pie. Due tothe increasing competition and demands, new and more practical constructions have become a necessity. In doing this project I wanted to make a comparison between having a stable integrated with a manege and having both constructions kept separate. I wanted to compare different layout and make an estimate of costs to see which solution would be less expensive and better with regard to working environment. I will further also deal with different ventilation-systems andlight transmissions.

This report describes a project, which was carried out as a final thesis covering 30 ECTS during the final semester of the Master of Science programme Industrial Design. The assignment was issued by Fagerhults Belysning AB in Habo. The assignment was to design a family of products in which LED was to be used as a source of light. The main focus in the initial part of the project was to find a way to design the inside of armature which was suitable for LED technology. An armature, already in the range of products at Fagerhult, with the desired qualities that was to be strived after was the Zintra. The lighting source of the Zintra is a compact fluorescent lamp.

Introduction: The number of hearing impairments in Sweden is increasing. The largest increase is seen in ages 25-44. There are reasons to believe that these impairments are noise induced. Leisure time noise is not controlled in the same manner that industrial noise is. An ongoing conflict between city council officials and rock club owners, musicians and music event organizers about sound levels at smaller live music clubs exceeding the national sound level restrictions created the need for an acoustic intervention project.

The capacity to process and to remember information is a basic condition for language ability and for coming reading ability. Reading ability is strongly connected to phonological awareness, receptive vocabulary knowledge and working memory capacity. In what way hearing impairment in children affects development of cognitive skills and later on reading ability is an area that has attracted minor attention for research.The aim with this study was to investigate changes in cognitive skills and reading ability in children with mild or moderate hearing impairment after one year of progress and furthermore if any connections between any increases of the abilities were to be found. Comparisons were made with results from age adequate normal hearing children. Moreover prosodic ability on word-level was tested this year.

The problem being examined is the disturbing noise that is created in an open plan office on a company working with a creative process, such as a newspaper or a communications agency. The purpose of this study was to examine the needs for today for a sound absorber in open offices and create and design a design proposal. The aim is also to develop a marketing material the product proposal. The problem has been broken down into the following questions:- How does the user look at the need of a sound absorber in an open offices solution today?- Does an interior designer apply sound absorbers when they furnish the intended environment? - How can a design that meets the needs that exists be achieved and to speak the user?The study is based on three choice of methods a literature review on selected topics that relate to the topic, an interview with an interior designer to explore how an interior designer applies absorbers in open plan office and finally an extensive survey that treats the user's needs and appropriate appearance for the product proposal.The design process has undertaken the following methods, design brief, requirements specification, functional analysis and sketches to produce the final product proposal.

The problem being examined is the disturbing noise that is created in an open plan office on a company working with a creative process, such as a newspaper or a communications agency. The purpose of this study was to examine the needs for today for a sound absorber in open offices and create and design a design proposal. The aim is also to develop a marketing material the product proposal. The problem has been broken down into the following questions:- How does the user look at the need of a sound absorber in an open offices solution today?- Does an interior designer apply sound absorbers when they furnish the intended environment? - How can a design that meets the needs that exists be achieved and to speak the user?The study is based on three choice of methods a literature review on selected topics that relate to the topic, an interview with an interior designer to explore how an interior designer applies absorbers in open plan office and finally an extensive survey that treats the user's needs and appropriate appearance for the product proposal.The design process has undertaken the following methods, design brief, requirements specification, functional analysis and sketches to produce the final product proposal.

The problem being examined is the disturbing noise that is created in an open plan office on a company working with a creative process, such as a newspaper or a communications agency. The purpose of this study was to examine the needs for today for a sound absorber in open offices and create and design a design proposal. The aim is also to develop a marketing material the product proposal. The problem has been broken down into the following questions:- How does the user look at the need of a sound absorber in an open offices solution today?- Does an interior designer apply sound absorbers when they furnish the intended environment? - How can a design that meets the needs that exists be achieved and to speak the user?The study is based on three choice of methods a literature review on selected topics that relate to the topic, an interview with an interior designer to explore how an interior designer applies absorbers in open plan office and finally an extensive survey that treats the user's needs and appropriate appearance for the product proposal.The design process has undertaken the following methods, design brief, requirements specification, functional analysis and sketches to produce the final product proposal.

Social media has recently expanded dramatically, as more people are using different media such as blogs, Facebook and Twitter, to express their opinions. This increases the possibilities to spread information and an unclear legal regulation in this area can create adverse consequences. Freedom of expression is a constitutional right, which forms an important cornerstone of a democratic society. Public employees? freedom of communication means that they can submit information to the media, without fear of reprisals from the authorities.

Skuldsättningsgraden hos svenska hushåll ökade stadigt från i mitten av 1990-talet fram till 2008. För att hejda denna utveckling införde finansinspektionen i oktober 2010 ett allmänt råd om begränsning av säkerhet i bostad vid upptagande av lån, det så kallade bolånetaket. Innebörden av detta är att 15 procent av bostadens marknadsvärde i kontanta medel krävs vid upptagande av bostadslån. För en förstagångsköpare som skall köpa bostad i Göteborg betyder det att en betydande summa pengar skall ha sparats ihop. Eller så blir alternativet att ta ett dyrare blancolån om inte kapitalet finns.För att undersöka hur förstagångsköpare i Göteborg har löst det ekonomiska genomfördes en enkätundersökning bland studenter på Chalmers Tekniska Högskola, Göteborgs Universitet och Högskolan Väst.