The climate changes that are occuring in the world have resulted in that the EU callingfor a 20 % reduction in energy consumption to the year 2020, to reach that goal theEU want the public sector to go forth as a good example. Västfastigheter owns andmanage the hospital buildings in the Västra Götaland region. To be able to reducetheir energy usage Västfastigheter has hired several consulting firms to chart out theenergy consumption on each hospital building. The biggest energy savings potentialhave been calculated and what the cost will be to perform each action. The energyaudit have been completed and stand as the decision basis for Västfastigheter?s choiceon which action packages that should be implemented.

Chapter 1 defines the aim of the project and gives a general orientation about ground heat extractors. In chapter 2 physical processes that could be expected to be involved in the heat transport around a ground heat exchanger are discussed. It is shown from a literature study what amount of moisture transport due to thermal gradients there could be expected in a ground heat exchanger. The conclusion is drawn that the moisture gradient (Sr) is of same magnitude as the driving temperature gradient (°C). At the expected amount of increased moisture around the pipes the moisture transport could be considered to have a little effect on the brine temperature.

The purpose of this essay is to investigate and discuss the current state of game research and its potential usage in didactic situations. The essay is divided in two parts. Part one consists of an attempt to comment preceding contemporary game research and address possible myths that have been established. Part two aims to discuss games narrative capacity and function in education using the theories and terms laid down by Wolfgang Iser and Gérard Genette.Contemporary game research tends to focus on classic retro games, trying to form theories for a general understanding of the media. This is a useful method as long as the purpose of the study is to define how game mechanics and layout are formed.

Samhällets utveckling i kombination med förändringar inom hälso- och sjukvården ökar risken att drabbas av en allvarlig händelse. Hälso- och sjukvården måste därför anpassas för att kunna hantera situationer med ett stort skadeutfall, i samma utsträckning som en oväntad minskning av tillgänglig kapacitet, till exempel vårdplatsbrist. Genom att hitta svagheter i verksamheten så ökar möjligheterna att åtgärda dessa och därmed förmågan att kunna upprätthålla de ordinarie målen för vård och behandling av patienter vid en allvarlig händelse. Syftet med denna studie var att utveckla och testa en arbetsmetod för att systematiskt kunna analysera och utvärdera katastrofmedicinsk beredskap, samt identifiera, orsaksbestämma, åtgärdsanalysera och mäta förmågan att hantera de för Landstinget i Östergötland (LiÖ) väsentliga områdena av katastrofmedicinskt beredskap. För detta ändamål utvecklades en arbetsmetod genom att kombinera en av Katastrofmedicinskt Centrum skapad strukturmall med den metod som Patientsäkerhetsenheten inom LiÖ använder sig av vid riskanalyser.

The climate changes that are occuring in the world have resulted in that the EU callingfor a 20 % reduction in energy consumption to the year 2020, to reach that goal theEU want the public sector to go forth as a good example. Västfastigheter owns andmanage the hospital buildings in the Västra Götaland region. To be able to reducetheir energy usage Västfastigheter has hired several consulting firms to chart out theenergy consumption on each hospital building. The biggest energy savings potentialhave been calculated and what the cost will be to perform each action. The energyaudit have been completed and stand as the decision basis for Västfastigheter?s choiceon which action packages that should be implemented.

ABSTRACTPurpose: The purpose of the study was threefold. Firstly, to investigate if a four week program in pain rehabilitation had any effect on how much individuals with persistent pain worked and their degree of kinesiophobia. Secondly, to study if there was a correlation between how much these individuals worked and their degree of kinesiophobia. Thirdly, to study if there was a correlation between the change in these variables.Method: 112 patients who had participated in a four week rehabilitation program took part in the study. The study had a retrospective design, which was based on a review on medical records and consisted of three minor parts.

This exam paper has been a collaboration between the writers and SYSteam Utvecklingspartner in Huskvarna. The assignment was about finding a need for a mobile application, making a requirement specification document with design documents and parallel to this constructing a prototype. The assignment is summarized in the following questions:? How can companies in the forest industry benefit from mobile information technology?? How can a user centered perspective be used in the process of making the requirement specification document and the design documents?? How do guidelines for usability apply to a mobile application?Three visits to companies in the forest industry were made to find a need for mobile information technology solutions. After a small analysis of the different companies? problems and conditions the decision was to use Tenhults Impregneringsverk AB in the case study.We used the FA/SIM method in our job of finding the organization needs for change and the principles of User Centered Design in the work of constructing a prototype.The result of our work is a requirement specification with design documents and a prototype.

Eutrophication of the Baltic Sea is a serious problem. A major contributing factor is diffuse losses of phosphorus (P) from agricultural land in surrounding countries. In order to estimate P losses, environmental monitoring of small agriculture-dominated catchments is being carried out in most of these countries. Evaluation of the risk of P leaching to waters is usually based on chemical tests originally developed to quantify the amount of soil P available for plant production. The tests are performed in different ways in the different countries and a number of different extraction agents are in use.

To regularly remove woody vegetation along the roadside of forest roads is an important part of the road maintenance, since the vegetation binds moisture in the road side and, thus, the removal makes the road drying faster with results in improved bearing capacity. Vegetation removal also makes it easier to upgrade the road by material recycling from the ditch and, moreover, the visibility along the road is maintained.The aim of the study was to evaluate what type of chain flail is the best and most cost-effective for removal of different kind of woody vegetation along forest roadsides.Time studies were made on two chain flails when removing woody vegetation in three different classes; easy-, middle- and heavy shrub removal. The studied flails were one light and rather simple flail named Optimal M160 and a heavier and more advanced flail named Slagkraft H210. The removal was made according to Holmen Skogs? specification and the quality of the cleaning was measured by objective belt inventory.The productivity was higher with the heavy flail within all cleaning classes.

This thesis has been carried out in New Zealand in collaboration with the University of Waikato. In association with Dr. Mike Duke the purpose of this work is to investigate whether two different software for modeling of photovoltaic systems are useful in the teaching of solar energy.The next ten years grid-connected photovoltaic systems are assumed to increase and therefore also a rising demand for people with engineering knowledge are to be predicted. For engineer students with a focus on solar energy a more practical teaching with design software´s can be a good method to make the students comprehend more when it comes to large scale photovoltaic systems and be more prepared for working life.The software´s used is called Transient System Simulation (TRNSYS) and Photovoltaic Systems (PVSYST) which are both well used throughout the world. To assess the reliability of the software´s, a reference solar power plant at 16.1 kWp installed capacity are used, which consists of photovoltaic modules from four different manufacturers.

This master thesis project at KTH is performed in the Mechanical and Aerospace Engineeringdepartment at University of Florida (UF). The thesis is a small part of a gas turbine researchproject where a vapour absorption refrigeration system (VARS) and a high pressure regenerativeturbine engine (HPRTE) are integrated together. The main objective is to build a computermodel of the VARS. The computer model is supposed to be used to analyse the off-designperformance of the VARS and should also be easy to integrate as a subroutine in a more complexsystem model. To model the VARS some knowledge of the absorbent/refrigerant mixture had tobe well known, in this case a mixture of ammonia and water.

AbstractThis bachelor thesis has been assigned by the company ACG Nyström, Borås. ACG Nyström is working in cooperation with a Swiss company named Jentschmann AG. Jentschmann is a manufacturer of ultra sonic welding machines which ACG Nyström is marketing in Scandinavia and the Baltic States. On behalf of Jentschmann AG the company has the aim to introduce the ultra sonic welding technique to new companies.The aim of this thesis is to compare traditional sewing machines with ultra sonic welding machines within two textile areas, protective clothing and outdoor living.Two investigative questions have been formulated for this purpose: what are the differences between a sewing machine and an ultra sonic welding machine? Is it possible to replace the sewing technology with ultra sonic welding? These stand as guidance for this paper.To gather knowledge interviews, literature studies, and tests on two different ultra sonic welding machines were performed.

Problem statement: In what ways do companies work strategically with event marketing?To answer the problem statement, the following research questions help us gain the necessary understandings:What role does event marketing play in a company?s marketing mix?What are the deciding factors that make companies select certain events?What objectives do companies have with event marketing?How do companies evaluate their event marketing?Purpose: Through analyzing multiple case studies of event users and event organizers, this essay attempts to gain an understanding of how companies work strategically with event marketing as a promotional tool.Method: Primary data collection was compiled through a series of six interviews of both event users and event organizers. This qualitative data has contributed towards the formulation of six case studies that outline the research findings. In addition to interviews, secondary data was compiled through literature, scientific articles, and internet-based materials.Conclusion: The findings of this paper show that event marketing is an integrated promotional tool that is used to further strengthen a company?s comprehensive marketing mix.

The climate changes that are occuring in the world have resulted in that the EU callingfor a 20 % reduction in energy consumption to the year 2020, to reach that goal theEU want the public sector to go forth as a good example. Västfastigheter owns andmanage the hospital buildings in the Västra Götaland region. To be able to reducetheir energy usage Västfastigheter has hired several consulting firms to chart out theenergy consumption on each hospital building. The biggest energy savings potentialhave been calculated and what the cost will be to perform each action. The energyaudit have been completed and stand as the decision basis for Västfastigheter?s choiceon which action packages that should be implemented.

The search for antibiotic compounds from the natural environment has been going on for seven decades, ever since penicillin entered the market and antibiotic treatments became routine. The evolutionary pressure put on the pathogenic microorganisms induced a rapid spreading of naturally occurring resistance genes, leaving only the option of finding new antibiotics to treat the resistant pathogens. Microorganisms have been extensively mined for their biosynthetic abilities to produce biologically active compounds. To date, more than 23 000 microbial natural products have been discovered. The Actinomycetales are ubiquitous bacteria that have been used for antibiotic discovery for more than half a century, and over 10 000 natural products have been identified from the order.