This report is part of the major thesis carried out at Stoneridge Electronics in Bromma,Stockholm during autumn and winter 2005-2006. The background to the thesis is the trendwithin the automotive industry where color displays have become more common for presentationof information to the driver, a trend that has come to the commercial vehicle market. Thepurpose of the thesis has been to evaluate whether programmable logic, with respect to FPGAtechnology, could be suitable for display control and graphics generation of these more complexcolor displays in automotive environment.Within the scope of the thesis the FPGA technology has been investigated, i.e. whatopportunities and threats there are with aspect to environmental and security requirements. Inaddition, the market of FPGAs and pre-built IP-cores has been investigated.

The main purpose of this master thesis is to investigate the information seeking of lay politicians, part-time politicians and professional politicians in connection with the possible upcoming fusion of the two administrative regions, Västra Götaland and Värmland. The focus of this study has been to study how politicians use and evaluate information and sources of information, and to investigate if there are any differences in how different categories of politicians seek information. Seven politicians were interviewed using semi-structured questions, and a phenomenographic approach was used to analyze the data. In Sweden there are few available studies of how politician seek information, but some international studies have focused on information needs, information sources, selection and evaluation of information. I have used previous research, and data from respondents to compile and analyze my results in three descriptive categories.

To render outdoor scenes with lots of vegetation in real time is a big challenge. This problem has important applications in the areas of visualization and simulation. Some progress has been made the last years, but a previously unsolved difficulty has been to combine high rendering quality with abundant variation in scenes. I present a method to mathematically generate and render vegetation in real time, with implementation in the scene graph Gizmo3D. The most important quality of the method is its ability to render scenes with many unique specimens with very low aliasing.

This thesis has been carried out at the Building and Civil Engineering Programme at Chalmers University of Technology in cooperation with NCC Technology. The study aims to investigate the optimal design of a library of standardized structural solutions for in-house multi-family buildings and what benefits it brings. Today NCC use technology platforms to improve efficiency and simplify the construction process. The platforms provide the constructors guidelines on how construction details should look like, but the details are not complete. NCC Technology started in the spring of 2013 a project to investigate what benefits there are to create a library of standardized structural solutions for the constructors, with more detailed solutions than in the platforms.

The idea to develop  a platform for a PID-controller came from the need to control the temperature in  an espresso machine in a more exact way than a thermostat could perform. In discussions with Syntronic AB the idea developed into PID-control for industrial use. Syntronic AB suggested that the platform should be based on a commercially available processor module to shorten the development time. The suggestion included the use of the microcomputer Raspberry Pi, which supports USB, HDMI, memory card and Ethernet.The work began with establishing a schedule for the 10 weeks of the projects duration, and after that a system specification listing all functions, implementation and limitations was made. When the foundation of the system specification was done, a preliminary system design took shape.Because of the Raspberry Pi´s lack of Analog-to-Digital converter, a circuit board containing Wheatstone bridges, differential amplifiers and a two channel Analog-to-Digital converter was fabricated.

The current study aimed to test the public self-consciousness impact on creative performance. An experimental design was used in which 40 participants were randomly assigned to two groups, one of which was the experimental group and the other was the control group. A mirror was used in the experimental group to induce public self-consciousness among the participants while they performed creativity tests. A consequence test was used where the participant had to give suggestions for the given scenario "What would happen if everyone became blind?" which was then measured in the number of proposals (fluency).

The current study aimed to test the public self-consciousness impact on creative performance. An experimental design was used in which 40 participants were randomly assigned to two groups, one of which was the experimental group and the other was the control group. A mirror was used in the experimental group to induce public self-consciousness among the participants while they performed creativity tests. A consequence test was used where the participant had to give suggestions for the given scenario "What would happen if everyone became blind?" which was then measured in the number of proposals (fluency).

The measuring of logs is important in the sawmills process to the sawn products. The technology of automatic wood measurement is continuance developing. This study has the purpose to see how the different techniques and the routines works of measure frames for determining of wood value and sorting in sawmills. The study is performed as a literature study and a survey. The survey includes some of the Swedish sawmills that produce more than 10 000 cubic meters sawed products per year.

The report describes the production of graphic correspondence and marketing material for DUCIS(Dalarna University Centre for Irish Studies).A logotype symbol is created on the basis of an element from the Celtic art, and a graphic material thatharmonies with this ideal of style is built around the symbol. A unique visiting card, correspondence cardand letterhead is produced to strengthen the identity of DUCIS outwards.The work proceeds with an international education folder which is an important element in the marketingwork for the MA-education which starts in the autumn of 2003. Two posters, one for the opening ofDUCIS in may 2003 and one for a conference in 2004, are produced. Finally, a redesign of the book coverfor NIS, Nordic Irish Studies, is carried out.The report describes the working process consisting of meetings, practical work and other elementswithin the process. The conclusion is that the work has been quite successful and that this, to a largeextent, depended on an engaged and supporting commissioner.

Abstrakt Produkten som jag har utvecklat är en mjukvarubaserad 3D-renderare. För att göra en sådan produkt är man tvungen att gå djupt in i området 3D och utföra alla beräkningar på egen hand. Dessa tar annars grafikkortet hand om. Denna rapport förklarar varför jag har valt att göra en egen mjukvarubaserad 3D- renderare och vad den är för något och i vilka områden den används. Här förklaras även min syn på programmering, digitala spel, vad programmering innebär för mig och hur min syn på spel har påverkat mig med tiden.

The main purpose of this Master Thesis has been to investigate issues concerning apple fruit quality in orchards of Äppelriket Österlen. The goal has been to develop a document, for future benefit towards growers and company management in the production of high quality apples.In order to investigate main issues of fruit quality, focus has been on statistics concerning apple varieties, age of the apple trees, new planting, orchard size and growers opinions. Nine growers have been interviewed to investigate opinions and contribution of different growing techniques to increased fruit quality. The investigation showed high age of the trees in production and low rate of planting of new trees. Differences in fruit quality were highest between small orchards. Most growers were satisfied with their fruit quality and with their own measures made to improve it.

SUMMARYEnvironmental issues are currently a hot topic of debate. Studies within the optics branch have not specifically been conducted previously, so the aim of this study was to determine the extent of environmental-awareness specifically within this branch.A survey, consisting of questions relating to environmental issues, was distributed to 100 randomly-selected opticians in Sweden. Of these 100 surveys, 64 were returned and showed a varied branch-engagement for environmental issues.Results of this survey showed that opticians were best in sorting newspapers, magazines, other paper and hazardous waste. Metal and rigid plastic were not sorted to any larger extent.Choosing environmentally-safe products was not so popular and only six stores always do this. 25 shops turn off electrical machines and equipment over night; while the majority of the remaining stores leave the machines on during the night.27 stores did not know if their electrical company provided ?green electricity?.Results showed that there is a lot of work to be done in making the stores more environmentally friendly.

Abstract Cucumber is the second most frequently consumed vegetable after tomatoes, 33 % are eating cucumber every day. The purpose of this work is to examine if there is any product development of cucumber in Sweden, and if so in what way. A questionnaire was used with a number of questions regarding quality, origin, supply and the way cucumbers were used, and the person was also asked to choose between the normal large cucumber and the minicucumbers. This was answered by totally 100 persons in two different stores, ICA Maxi in Löddeköpinge and a discount store with a large supply of fruit and vegetables and where a large share of customers are immigrants, Özen All Frukt in Malmö. The results from questionnaire show that in some of the issues the results vary a lot between the two stores.

The aim of this paper is to investigate how well information and communication technology (ICT) is implemented in the new teacher training program in the subject of Swedish and how this is presented in the applications for examination licence to the National Swedish Agency for Higher Education. This is an interesting field of study, since ICT has been selected, by an investigation chosen by the government to be one of four overall perspectives that are supposed to permeate the teacher training program. There have been several difficulties involved in this project of which one has been the extent of the material.  27 applications and all curriculums in the subject of Swedish belonging to them have been examined. Another difficulty was that the applications and the curriculums are written by different persons under different conditions such as time and resources.

Abstrakt Produkten som jag har utvecklat är en mjukvarubaserad 3D-renderare. För att göra en sådan produkt är man tvungen att gå djupt in i området 3D och utföra alla beräkningar på egen hand. Dessa tar annars grafikkortet hand om. Denna rapport förklarar varför jag har valt att göra en egen mjukvarubaserad 3D- renderare och vad den är för något och i vilka områden den används. Här förklaras även min syn på programmering, digitala spel, vad programmering innebär för mig och hur min syn på spel har påverkat mig med tiden. Jag tar även upp mina tankar om spelindustrin och samhällets misstolkade värderingar av spel samt vad för sorts spel jag anser skulle gynna mänskligheten i framtiden. Vad jag tycker om utbildningen Digitala spel nämns också samt hur jag tror att den skulle kunna förbättras. Slutligen följer en kortfattad beskrivning av hur mitt projekt har genomförts. Abstract The product I have been developing is a software based 3D renderer.