Typically, when Faurecia in Torsås are planning a new assembly line, one of the steps is to build a full-scale model of the line in card board, a form of mock-up planning. Faurecia has shown interest in finding an alternative methodology. The purpose was to explore the possibility of replacing today's cardboard based mock-up planning with models in a digital simulation environment.The purpose of the thesis has been to answer some of these complex questions; What are the benefits of using a simulation tool? In what way can we use it? If we choose to use a simulation tool, in what way does it affect our way of planning an assembly line? What are the advantages and disadvantages? Are there any economical and social aspects?Our results made us realize that a digital simulation tool does not replace the card board. On the other hand simulation could be used as a complement.

Modern sawmills are using the raw-material and the production-capacity more efficiently today, due to rising raw-material prices and higher production costs. Log sweepness has a negative effect on the sawn yield, for sawmills with straight-sawing. It is desirable that these logs could be sorted based on more criteria, if it increases value-yield and consequently the utilization of raw-material. Bow-heights over 1 cm have a negative effect on sawn yield, since the surface of the mantle cuts down in the sawn pattern. Some of these small bow-heights reduce the logs yield of value which affects the production planning negatively. Nearly half of all the Swedish logs have a bow-height over 1 cm.

This thesis concerns waste management on construction sites and was conducted on behalf of ICA Fastigheter.Areas of concern:How can an environmentally-efficient waste management system on construction sites be defined? What potential exists for exploiting the waste resources that are generated?How can the waste management be optimised by reducing the quantity of waste and by optimal sorting?How can the client of a project influence the waste management?The purpose of the work was to investigate sustainable waste management in the building and construction sector and to highlight waste as a resource from an environmental and economic perspective.The aim of the work was to define an environmentally-efficient waste management system, to analyse the potential that exists in waste management and to draw up guidelines for optimal waste management.The method consisted of a literature study, two visits to construction sites and four interviews.An environmentally-efficient waste management system means that the waste is managed in the following order of priority:Prevention     Reuse  Recycling     Energy recoveryLandfill     The prevention of waste is an important area that has not been adequately explored by the building and construction industry. The quantities of waste could decrease with the implementation of measures such as ordering materials in the dimensions required, prefabricated components, logistics centres with Just-In-Time deliveries, less and improved packaging and less wrapping. The reuse of waste materials and temporary apparatus as well as the use of a return pallet system are examples of reuse that reduces the quantities of waste.In most cases the source sorting work is a matter of course and the proportion going to landfill is down at a low level. The source sorting can be optimised by sorting all materials that can be reused and recycled to use them as a resource.

GPGPU is a collective term for research involving general computation on graphics cards. A modern graphics card typically provides more than ten times the computational power of an ordinary PC processor. This is a result of the high demands for speed and image quality in computer games.This thesis investigates the possibility of exploiting this computational power for image processing purposes. Three well known methods where implemented on a graphics card: FFT (Fast Fourier Transform), KLT (Kanade Lucas Tomasi point tracking) and the generation of scale pyramids. All algorithms where successfully implemented and they are tree to ten times faster than correspondning optimized CPU implementation..

This essay is a product of our examination work on candidate level in Interaction Design. The aim in this project was to design a digital wallet integrated into a cellular phone and make it as an electronic payment tool. In our project the goal has been to create a digital wallet not just for payment, but also develop it into a complete digital wallet, replacing visa, membership card, student cards, id card and receipt. Our ambition is to take care of current qualities of today's wallet and improve where it is possible so that can be replaceable with the digital wallet..

Business and organizations use computer network in a greater extension than ever before, especially for business-critical use. That increase the demand of security for all systems, both against internal and external threats. The demand on the authentication method used today increases. Today they normally uses password or some kind of smart card. I will performa literature study that will investigate the possibility to increase the security in authentication of users without the use of extra hardware.

Context. In today?s society we use smart cards in many areas, NFC is a smart card technology that allows contactless interaction between a reader and the tag, the tag is often in the form of a card. NFC can be used for various payment methods or as access card to a building which makes life easier. In previous studies, the technique has proven to be weak to attacks using an NFC reader connected to a computer.

This report has a purpose to identify the payment methods available for e-commerce, tosee if they fulfill certain requirements. By investigating thirty of the most popular webshops, a few primary services have been found and revised. Security requirements fore-payment systems include authentication, non-repudiation, integrity and confidentiality.Other requirements considered to be important are usability, flexibility, affordability,reliability, availability, speed of transaction and interoperability. Advantages and disadvantageshave been identified to see if the services fulfill the requirements. Also surveysof consumer payment habits have been investigated to identify the factors of decisive importanceto the usage of payment services.

Abstract The purpose of this project is to develop a modular processor card which is intended to work as a platform for Kitron Development Karlskoga. The modular processor card is meant to be used as a control system in development projects, mainly in medical and industrial products. The processor card will consist of a central unit with the basic functions for a control system. Furthermore there will be complete modules with machine commodity and programming, to pick exactly the necessary functions for a specific application. With consideration to the specification of the development and the main unit, I chose an adequate microprocessor (AT90CAN32) as core and interface circuits to stated border areas. The construction is first completed in the program MultiSim and then remade in the program OrCAD Capture. The programming language C was used in the software model.

Context. In today?s society we use smart cards in many areas, NFC is a smart card technology that allows contactless interaction between a reader and the tag, the tag is often in the form of a card. NFC can be used for various payment methods or as access card to a building which makes life easier. In previous studies, the technique has proven to be weak to attacks using an NFC reader connected to a computer.

The last decade has created an increasing pressure on companies to decrease their impact on the environment and to increase their effectiveness of recycling the company?s resources, especially for the steel industry. Companies have also started to realize the economic aspects of an effective internal reverse logistics. In the past the value of an effective internal reverse logistic was something that companies tend to underestimate and there are few academic studies done in this area. The purpose of this essay has been to identify key factors to create an effective in plant storage, transport, sorting and handling of returned steel. From these factors a generalized model for creating an effective return steel flow will be developed.

This thesis examines and measures differences in effciency between L1- and L2 language use for solving referential problems. Quantitative measures used in the study were time and error frequency. Qualitative measures, such as how the tasks and the participants own performance were experienced, were measured by an post interview and two questionaires. Two different tasks, a sorting task and a construction task, in which each informant was given the role as a constructor or instructor, were used for data gathering. A total of 20 dyads, divided in two language groups (English and Swedish) participated in the study.

The aim of this thesis is to find a statistical model that sort logs according to a predicted modulus of elasticity on the sawn boards. The input parameters for the model are X-ray variables from an X-ray scanner. For some of the log classes sawn at the sawmill it is desirable to have a narrow distribution of modulus of elasticity on the sawn boards. 250 pine logs from five different diameter classes were numbered and followed through the sawmill process. Log data were collected from X-ray and 3-D scanners in the log intake.

SAAB Aerotech division FGR in Arboga builds and develops equipment and components used in both military and civilian applications. To build a test system for a specific project that SAAB is responsible for requires a simple signal generator that can provide a pulse modulated signal. The need to buy a new advanced signal generator for example from Agilent is not as profitable as the instrument is expensive and contains features that SAAB does not require in their applications and test systems. That was the reason why SAAB offers two students a thesis where the goal is to construct a signal generator in accordance with what SAAB requests.This thesis contains several different phases. The first step was a meeting with our supervisor Mats Bergman and by reading the data sheets for components to be used in the project, with these information and specifications that we have received from SAAB we started to construct the signal generator.What we did during the construction work was to simulate and draw a schematic to be able to design the circuit board.

Swedish sawmills of today suffer from unsatisfying economy with high costs and low benefits. The economical result depends on how well the sawmill can use their raw material. Iggesund Timber AB, a sawmill in the Holmen group, produces a large amount is enduse orientated products for the woodworking industry. Therefore the aim of this student thesis was to investigate the possibility of automatic enduse orientated quality grading of Scots Pine (Pinus sylvestris) saw logs by using a gamma-ray log scanner. Iggesund Timber AB has the possibility to grade logs automatically with TINA, a two way gamma-ray log scanner. Grading and classification of Scots Pine logs in Sweden today are mainly manual but can in some rare cases be automatic.