Sheep breeding contributes not only with wool, hides, meat and milk but also with openlandscapes. The sheep?s wool is a good raw material thanks to a lot of different qualities as itis water rejecting and easy to form. The wool production today is concentrated to specificplaces in the world which leads to environmental problems and a distorted market. InJämtland, a province in Sweden, there is right now a staking going on for local production andrefining of wool in a project called Ullforum.

Sheep breeding contributes not only with wool, hides, meat and milk but also with openlandscapes. The sheep?s wool is a good raw material thanks to a lot of different qualities as itis water rejecting and easy to form. The wool production today is concentrated to specificplaces in the world which leads to environmental problems and a distorted market. InJämtland, a province in Sweden, there is right now a staking going on for local production andrefining of wool in a project called Ullforum.

This thesis has been performed at BAE Systems Hägglunds, which is located in Örnsköldsvik. Hägglunds has a wide background of engineering, where they have manufactured all from airplanes to lifting cranes. Currently they only produce track vehicles at Hägglunds, where they manufacture the CV90 and BVS10 models. This thesis concerns the BVS10 which is an all-terrain-vehicle. The main purpose with the BVS10 is to enable transportation of material and personnel thru tough terrain.

Today there is no way of measuring or simulating turbulent flow in high Reynolds numberenvironments. The computational power required to simulate these conditions is not expectedto be available for several decades so instead the CICLoPE project aims at solving thisshortage by the construction of a long carbon fiber wind tunnel in which real measurementscan be made. To do accurate measurements it is of importance that the wind tunnel, 0.9 metersin diameter and 110 meters long, is as straight as possible.This master thesis treat the design and construction of a device which may be used to align thetunnel along a reference laser beam. A design is presented which allows the pipe to be alignedwithin about a quarter of a millimeter along its entire length. Contents span over severalscience fields such as physics, mechanics, control theory and electronics.The result is a theoretically correct design.

Decomposition of organic matter is a critical process in the ecosystem, which involves many essential biotic and physical parts. Decomposition is therefore an important process both above and below ground. The rate of decomposition is dependent of many environmental factors for example: pH, moisture and supply of oxygen. The decomposition can therefore be affected by large scaled environmental influences, such as acidification and climatic changes. The root litter in the forest is in different ways affected by acidification, liming and manuering.

Hemp is an old agricultural plant and has been used for hundreds of years for making textiles, ropes and other fibre products. In the middle of the last century the Swedish government prohibited all growing of hemp. Natural fibres were replaced by syntetic fibres instead. Today there is a newly awakened interest for using natural fibres from renewable materials. Growing of industrial hemp for fiber is allowed in Sweden again. I want in my Paper give Swedish growers an insight of which harvesting methods that have been tried in Sweden and how they worked.

Stunning of pigs at slaughter constitutes of primarily two methods; carbon dioxide and electricity. Both methods have advantages and disadvantages from an animal welfare point of view. The purpose of this study is to compare different methods of stunning pigs from a welfare point of view. Questions included in the study are 1) What differences are there, from an animal welfare point of view, between CO2 and electricity as methods for stunning pigs? 2) What alternatives are there to the methods currently in use? 3) Which method for stunning pigs is preferable from an animal welfare point of view?This report is a literature review.

The purpose of this report is to examine the possibilities to decrease the number of insects and other pathogens in a crop of pak choi (Brassica rapa), grown with different types of cover and living mulches. Included in the report is a study of literature where amongst others, a summary on the vegetable pak choi and theories of living mulches and different kind of covers are to be found. To examine the amount of predators in the field, traps were used. During the autumn 2002 the tests were conducted in Alnarp. The pak choi and the living mulches were planted/sawn at the same time, the different covers were also applied at this time. The total experiment was divided into six different treatments (plus control) of which three were with covers and three were with living mulches. Once a week the number of leaves, the height and damages were read on ten of the plants from each parcel.

The aim of this study was to determine the prevalence of antibodies against the intracellular protozoan Encephalitozoon cuniculi in healthy pet rabbits. Encephalitozoonosis is an important differential diagnosis to ascending infection with Pasteurella multocida in the ears since a common symptom is vestibular syndrome. Samples were collected from healthy rabbits that were brought to an animal clinic in Stockholm for some kind of prophylactic procedure. The samples were analysed by an India-ink Immunoreaction test / Carbon Immunoassay. Of 106 rabbits 7 (6.6%) were seropositve.

Filtermaterial av 75 % torv och 25 % kolaska har använts under 2 respektive 4 år för rening av avloppsvatten från två biltvättar. Jämförelse med Kristianstads kommuns riktvärden för avloppsvatten från fordonstvättar visar att filtren fungerat. För avfallsklassning krävs kunskap om innehåll av miljöfarliga ämnen i produkter som använts i tvätthallarna. I brist på kunskap om innehåll av ej analyserade miljöfarliga ämnen i filtren anses förbränning vara ett bra omhändertagande ur miljösynpunkt, då energi och aska återvinns..

The following study aims to investigate the environmental conditions of the harbor of Sk?rhamn, a small fishing community on the west coast of Sweden. The interest to do so rose as a newly built apartment residence failed to connect the sewage pipes of 18 apartments, causing the untreated sewage running into the sea. The parameters accounted for are the C/N ratio, total organic carbon (TOC) as well as total nitrogen present (TN) and ?13C in the top ten centimeters of a sediment core retrieved in the Sk?rhamn harbour.

Fuel pellets are in Sweden mainly produced from sawdust and cutter shavings. Before the pelletising process the raw material is dried to attain consistent moisture content and ground up in a hammer mill. In the densification process (pelletising) the ground material is forced through holes in a rotating die. This heats up the wood particles which cause them to soften and self bond. After the process the pellets are cooled, sieved and bagged. The milling process creates a wide range of particle sizes.

Automatic rumination measuring can be applied as a health indicator in dairy farming but is also highly desirable for research purposes. This study aimed to validate the technical functionality of the product RuminActTM, which employ acoustics to monitor rumination duration. The time budget of high yielding cows was studied and possible differences in rumination time between 13 rations were interpreted. Further the study examined what affects daily rumination and rumination efficiency. The validation was performed with direct observations that were compared to the automatically recorded rumination durations.

The purpose of this thesis is to study whether there is a demand for sawn wood products of large dimensions and planed goods among Wallnäs AB:s customers. The thesis consist of two main parts, one survey among Wallnäs present customers and another one which purpose is to increase Wallnäs customer base. Finally there is a chapter that describes what properties the raw material has to have in order to produce the demanded products. The survey to the present customers was conducted through a questioner. A sample of those who stated an interest for either sawn wood products of large dimensions or planed goods, were later contacted for a telephone interview. To reach out to new customers, relevant companies has been identified through the Swedish Trade Councils data base and through the member list of the Timber Trade Federation.

This study concerns the type of vegetation selected by cattle grazing on semi-natural pastures, and whether the selection depends on the nutrient content of the vegetation or on other factors. The study was carried out in three different semi-natural pastures in the Uppsala area during June, July and August in 2006. The three pastures were first surveyed, mapped out and divided into sub-areas with regard to the type of dominating vegetation. The vegetation types identified were: wet, mesic, dry, wooded, pasture with signs of former cultivation (arable). Within each vegetation type three 1x1 m sampling plots were laid out. The grazing behaviour of the cows was recorded in a behaviour study.