The effect of climate change places demands on how we build cities. Cities have to be built denser to meet the objectives of sustainability but as a result of this densification city green areas are at risk of exploitationand disappearing. The question this raises is whether there has to be an opposition between a dense and a green city?Urban trees are playing a very important role in cities. They stand as the major part of the vegetation in citieswhich are otherwise dominated with concrete and stone.

Man?s impact on the environment is something that increasingly becomes topical in today?s society. Because of this, several companies have started to take interest in the effects they?re responsible for, not least considering their image. Emissions of Carbon dioxide generated from goods traffic are accountable for a large part of the total emissions of greenhouse gases in the world.

Ocean Thermal Energy Conversion, OTEC, a technology using the temperature difference between cold deep seawater and warm surface water, can extract the work in the form of electricity. OTEC gives also synergies of drinkable fresh water. The temperature difference has an impact on the efficiency of the technology, which means that the feasibility of OTEC is geographically limited. The project intends to explore the possibility of replacing the atoll Tarawa?s present electricity generation with an OTEC plant and to explore synergies. In the present situation all of Tarawa?s electricity is generated by fossil fuels.

Ocean Thermal Energy Conversion, OTEC, a technology using the temperature difference between cold deep seawater and warm surface water, can extract the work in the form of electricity. OTEC gives also synergies of drinkable fresh water. The temperature difference has an impact on the efficiency of the technology, which means that the feasibility of OTEC is geographically limited. The project intends to explore the possibility of replacing the atoll Tarawa?s present electricity generation with an OTEC plant and to explore synergies. In the present situation all of Tarawa?s electricity is generated by fossil fuels.

Due to recent legal enactments regarding Carbon dioxide emissions, the car industry is facing higher demands. An effective way of reducing these emissions is to minimize the weight of the vehicle. This thesis constitutes a feasibility study on whether or not it is applicable for the car industry to utilize an inner floor structure comprising composite materials. The principal was the projectSåNätt, in which the main participant was Volvo Cars Corp. In consultation with a reference group, consisting of delegates from the industry and KTH, a specification of requirements was produced.

The purpose of this report is to simplify the process of designing carbon fiber strengthening for existing concrete constructions, specifically beams. The intention has been to establish a flow chart containing information on the necessary testing and calculations for the design, to as far degree it is possible satisfy the requirements stipulated by Swedish and by extension, European authorities.To do this the report will examine a parking garage situated underground by Akademiska Sjukhuset, Uppsala. The parking garage was built in the mid-seventies, and has in recent years been subjected to a greater load than designed for by the construction of a road on top of it. FEM-Design has been used to obtain the internalforces of the beams and thereby determine whether they are in need of strengthening or not and thereafter design the strengthening according to Täljsten (2006) with some corrections from Täljsten (2011) due to new regulations.The result of this report is that the flow chart used is viable to design carbon fiber strengthening, atleast with the conditions met in our reference project.The conclusion drawn after working with this report is that there is a need for a clear standard for carbon fiber strengthening , preferably a standard that can be used throughout Europe..

This report is a bachelor's thesis of two students from the Energy and Environment degree at KTH Stockholm. Grinda is an island situated Stockholm archipelago. Skärgårdsstiftelsen is landowners and manages the area. Grinda Wärdshus, a guest house located in the island, currently uses an oil-fired boiler as a heating system. The aim of this thesis is to investigate whether wood chips or pellets is, from a sustainability standpoint, a suitable heating method for the guest house.

This report analyzes disposable packaging and returnable packaging with the methods life cycle analysis and life cycle costs analysis. These two different packaging are analyzed through the company Clas Ohlson?s packaging-flow. To get a picture of how the flow works, a visit at the company and email contact have been done with Clas Ohlson to get relevant informationToday Clas Ohlson has a big flow of articles to the stores without larger variations in the demand, with the exception of autumn, which is when customers start shopping for Christmas. Clas Ohlson?s articles are placed on a pallet and are wrapped into plastic-film for protection and to make sure that nothing will be stolen.

Due to recent legal enactments regarding Carbon dioxide emissions, the car industry is facing higher demands. An effective way of reducing these emissions is to minimize the weight of the vehicle. This thesis constitutes a feasibility study on whether or not it is applicable for the car industry to utilize an inner floor structure comprising composite materials. The principal was the projectSåNätt, in which the main participant was Volvo Cars Corp. In consultation with a reference group, consisting of delegates from the industry and KTH, a specification of requirements was produced.

A titania-supported nickel catalyst was prepared and tested in methanation in order to evaluate its catalytic properties (activity, selectivity and specially, activity loss), and compare it with an alumina-supported nickel catalyst.The titania-supported catalyst did not only show higher stability than alumina, but also presented a different cause of deactivation, carbon formation. In addition, a kinetic model was obtained for the titania-supported catalyst, and a study of the effect of different operating conditions (temperature, composition and partial pressures of synthesis gas and water) on the deactivation rate and carbon formation of this catalyst was performed.

This literature study concerned the use and function of the radioactive isotope carbon-14, as a dating method of organic material, within the scientific field of physical geography. In this report it is presented the need of atmospheric calibration curves and the development of these as a necessity to translate carbon-14 years to calibrated calendar years. A number of common age-depth models that is used to give an approximation of an accumulation sequence and its related dates over the actual time period in different natural archives is presented and discussed. Different problems that commonly occur when age-depth models are utilized as for instance reservoir effects, contaminations or other age deviations are addressed and analyzed. The software CLAM in presented and discussed and was also used to produce age-depth models.

Textilindustrin står inför stora utmaningar när det kommer till forskning, utveckling ochproduktion på ett miljöanpassat och socialt ansvarsfullt sätt. Ökat miljömedvetetande hoskonsumenten har lett till ökat intresse och möjlighet för företaget att arbeta mot ett hållbartföretagande.Examensarbetet är skrivet som en del av kandidatexamen i textilingenjörsprogrammet föruppdragsföretaget BlåKläder AB och utfördes för att även kunna fungera som ett underlag förandra företag i avsikt med att påbörja/utveckla sitt arbete med socialt ansvarstagande.I arbetet presenteras miljöpåverkan av en arbetsbyxa i bomull från råväv till distribuering.Fyra miljöbelastande kategorier har tagits med i undersökningen, där mängden av kemikalie,vatten- och energiåtgång samt koldioxidutsläpp räknades ut per arbetsbyxa av minimumorder. Sammanställning av resultat visar att det används 2,5 kg kemikalier, 10,3 liter vatten,756 Wh energi och det släpps ut 0,4 kg kodoxid vid tillverkning av en arbetsbyxa.Rapporten behandlar och beskriver produktion av en rå bomullsväv medflamskyddsbehandling. Processflödet för hela behandlingsförloppet analyseras i arbetet därbåde kemikalier, energi- och vattenåtgång tas upp vid varje delprocess. Koldioxidutsläppanalyseras som en särskild del av rapporten och omfattar de direkta utsläppen av tung lastbiloch fraktfärja.

Vid hja?rtoperationer leder man bort blodet fra?n hja?rtat och kopplar upp patienten till en hja?rt-lungmaskin med tillho?rande beha?llare (kardiotomi-reservoar). I det o?ppna sa?ret tillfo?rs koldioxid kontinuerligt. Detta go?rs fo?r att avlufta sa?rha?lan och hindra luft fra?n att komma in i hja?rtat och de stora ka?rlen under kirurgi.

The prevailing food and energy crisis of the world, due to the declining reserves of fossil energy and a never ending rise of consumption, forces us to look into new fields to supply our energy demand. The boom of bio energy is criticized, as food crops are used to provide biodiesel and ethanol and the volumes are ridiculously small to supply world demand. Algae are one of the world?s oldest life forms and exist in many different phyla, providing a great variety to choose from, for different purposes. Cultivating microalgae offer a way to produce energy at great volumes without competing with food production and at the same time the algae offer a way to use our expensive nutrients in a more efficient way, besides this the algae are Carbon dioxide neutral since their carbon source can be supplied by the atmosphere and the additional energy required can be supplied by algal oil or other renewable sources.

With the expansion onto the international market almost a decade ago, Swedish energy corporation Vattenfall began it's breaking and burning of coal on German soil. Criticism aimed at Vattenfall peaked in the mid 2000s with the revelation of large quantities of Carbon dioxide emissions and the re-location of villages and graveyards in German states Brandenburg and Saxony. The purpose of this thesis is to show where the responsibility for these activities lie. By analyzing the history of, and the political debate surrounding, Vattenfall, I will show that the prevailing policies of right- as well as left-wing parties in the 20th century were all, regarding this matter, market oriented. I will also show that these market promoting policies made possible a situation where the transparancy of, and state control over, Vattenfall were close to eliminated.