With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area.

Since the 19th century the concentration of CO2 in the atmosphere hasincreased by 40 percent as an effect of the use of fossil energy sources.Increased concentration of CO2 will likely lead to increased temperature,changes in precipitation, rising sea level and increased frequency of extremeweather like storm events. A step to reduce emissions of CO2 and mitigateclimate change, for the property of Tagel, can be to adopt new silviculturalstrategies and analyse which is the most effective. As a result of that, threescenarios was produced, business-as-usual (BAU), increased set aside landand energy. An introduction of windpower at Tagels estate (property) andeffects on carbon balance was also examined. By using the Heureka systemand LCA-analysis in this study, it showed that the scenario of increased setaside land was the most efficient way to reduce carbon dioxide (CO2)emissions for the analysed period of 100 years.

One problem in today?s indoor air quality lies within insufficient ventilation. Dynamic ventilation can be obtained by implementing a Demand-Controlled ventilation (DCV) system. DCV systems adjust the ventilation in a building by calculating the impact made by its? occupants.

Vår uppgift är att undersöka om vi kan förbättra utsignalens kvalité från ett digitalt TV-kort genom att översampla A/D-omvandlare. Vi kommer att programmera vår kod i en FPGA och i den finns enbart 3 stycken multiplikatorer lediga. Utgången från vårt filter ska ha samma frekvens som innan översamplingen, vi kommer därför att bygga ett FIR-filter som decimerar signalen. Vi valde detta filter för att kunna utnyttja symmetri och minimera antalet multiplikatorer. Vi använde ett filter med ordningen 44 vilket ger 45 koefficienter.

The resting area is the most important place in the barn for the dairy cow, sometimes called the heart of the free stall system. Inadequate design of the lying area, and lack of or poor quality of bedding materials may reduce the hygiene of the stall. Poor management regarding the cleanliness of the resting area may lead to poor animal hygiene and increased bacterial growth. This in turn will lead to increased risk for environmental mastitis as well as impairing milk quality through contamination with spores. In this literature study the most commonly used bedding materials; straw, sawdust, wood shavings, clean sand, recycled sand, peat and recycled manure solids, are compared to one another with regards to their ability to resist bacterial growth. Effects of adding hydrated lime to bedding materials have also been studied. Most bacteria need humidity and prefer a quite high water activity to be able to grow.

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area.

Smallholder farmers in Uganda suffer from declining productivity. With a rapidly increasing population, marginal land is taken into production and the current land management leads to loss in soil fertility and escalation in soil erosion. There are studies indicating that the use of agroforestry increases soil organic carbon (SOC) compared to systems without trees. Soils which are high in carbon have many advantages, for example better water holding capacity, which can reduce stress on crops during drought. The aim of this study was to determine the effect agroforestry has on SOC concentration in small-holder farming systems in Uganda. The intended system to study was farms practicing agroforestry methods or not in intercropped plantain (cooking banana) fields.

An excessive input of nutrients to lakes and other water bodies has created a problem with eutrophication in Sweden. Untreated, or partially treated, domestic sewage is a major source for discharge of phosphorus (P), which is the nutrient most frequently responsible for eutrophication of most fresh waters and the Baltic Sea. The waste water can be cleaned by filter materials, which have a high P-retention ability and which after saturation may be used as fertilizers. Four potentially suitable filter materials were tested in batch- and column experiments in this study. In the batch experiments, the following materials were shaken with waste water in time series ranging from 5 seconds to 60 minutes: coarse (1-4 mm) and fine (0-2 mm) Polonite® (heated bedrock from Poland); Filtralite® (light expanded clay aggregates with limestone added before burning); water cooled blast furnace slag (BF-slag) and BF-slag mixed with 10% burned limestone.

Combustion of fossil fuels is today the dominating source of energy. During combustion,carbon dioxide is formed. The carbon dioxide accumulates in the atmosphere,which raises the global average temperature on earth through the so called greenhouseeffect. The only way to reduce the emissions of carbon dioxide from combustionin a coal fired power plant is through carbon capture and storage (CCS).Post-combustion capture is a technology to separate carbon dioxide from the uegas after the combustion for efficient transport and storage. The steady state operationof coal fired power plants with post combustion capture has already beenthoroughly investigated on a pilot scale, however much work remains to investigatethe plants dynamic operation.

Aquaponics is a food production system consisting of a consecutive cultivation of plants and aquatic animals, fish or shellfish, in recirculating water. The plants feed on the nutritious effluents from the fish tank and bacteria converts ammonia from the fish tank into nitrate that is absorbed by the plants. The plants receive nutrition and the fish gain purified water. The environmental impact of the production of fish meal and fish oil used in conventional fish feed includes a large consumption of fossil fuels with subsequent carbon dioxide emission. The aquaponic system can be made environmentally sustainable and self-supporting if supplemented with a vermicompost/vermiculture for the production of worm protein as a fish feed. Vegetable waste from the hydroponic part of the system can be reused as worm feed in the compost and the protein rich worms can be harvested, dried and grinded and brought back to the aquaculture as fish feed. As a first step in this direction, I have investigated the effect of recycling of vegetable waste in vermicomposts on the growth and number of earthworms (this was evaluated after harvesting). The hypotheses were that earthworms can be cultivated in the vegetable waste and that by adding manure to the vermicompost it is possible to obtain a nutrient content adequate to support a continuous worm harvest, in other words create a vermiculture. Eisenia fetida and Dendrobaena veneta were grown in 20 L bins containing peat mixed with either poultry or cattle manure. The proportions were 70% peat and 30 % manure. Discarded plant parts from lettuce cultivation was added to the vermicomposts (35 g per week) and water was supplied with 0.8 L per week.

Målet med detta examensarbete var att utveckla en fungerande prototyp för styrning av ett portabelt filter med varvtalsreglering och tidräkning. Om möjlighet fanns, skulle även tillval som tryckstyrning, gasindikering och flödesmätning göras. Dessa tillval kunde regleras med hjälp av fyra knappar. För att allt skulle vara lättare att hålla under uppsikt, kunde alla inställningar och värden ses på en LCD-display. Konstruktionen består av en mikrokontrollerstyrd elektronikkoppling med extern realtidsklocka för drifttidsräkning.

With increasing energy prices and increased focus on the environment we saw the need for companies to get control over their energy use and their emission of carbon dioxid. An analysis tool that integrates both these areas is, with our knowledge, not available on the market today. Therefore, our project became to develop such a tool.By doing this degree project we would like to clarify that energy consumption and environmental impact are integrated. The less energy consumed by today?s society the smaller the environmental impact will be.

The idea for this project was initiated together with one of the leaders in the forest, paper and packaging industry. To get through an A/R CDM process the company is exposed to the risk of failing the process or that the overall costs will exceed the benefits of the project. This would delete the incentives to invest in GHG removals compared to purchasing emission allowances on the carbon market. The questions that have been raised and needs clarification in the thesis are the following:? From a company perspective, what are the incentives for implementing Forest Clean Development Mechanism (CDM) projects?? What is a likely financial outcome of a reforestation CDM project on degraded land in the Guangxi province of the Peoples Republic of China?? When does an investment like this break even with the cost of buying market based carbon emission allowances? The objective of this master thesis is to carry out a research about the incentives for forest, paper and packaging companies to invest in reforestation through the clean development mechanism.

This work aims to evaluate the possibility of using a graphical programming language to develop software for a digital signal processor. A fixed-point digital signal processor called Blackfin BF-537 is used for this. Instead of using conventional programming languages, like C or assembler, for software development the possibilities to use a graphical environment to fill the same purpose are examined. The development environment primarily used is NI LabVIEW, but also the use of Mathworks Matlab Simulink is investigated. A variety of programs consisting of various signal processing operations and utilities are developed using these development environments.

The purpose of this paper is to explore web use and web navigation behavior. This paper presents findings from qualitative research based on interviews and diarie studies. The basis of this study is Eli Parisers work about ?the filter bubble?. As personalization systems shape our experience of the web, based on who we are, our bubble of knowledge and information becomes smaller.