This report was written as a result of a Bachelor Degree Project at the School of Technology and Society at University of Skövde spring 2007, together with Jede AB in Mariestad. The report covers the development of a door to a coffee vending machine that is under construction, and will in a chronological order describe the project from ideas to final product.The project started with a rather extensive feasibility study that thru market research and user tests sorted out the opinions of potential customers, concerning today?s available assortment. Technical areas concerning materials and manufacturing methods were also scrutinized for the consideration of the possibilities of a future production.The next step was to constructively generate ideas and thoughts that later on could grow to be potential solutions. After several weeks of hard work and pieces of good advice and recommendations from the assigner, four comprehensive concepts were built up.

The door and its surrounding, is an important part of all buildings. It often amount to a significant part of buildings total costs. The more demands of functions the largerdoes the costs grow.The purpose of this report is to analyze those demands and how to fulfill them.Another purpose is to examine of which reasons the cost grow and how to avoid it inthe best possible way. The study will be performed in collaboration with Bjerking AB. To define the demands a literature study will also be performed.

This thesis includes an energy survey of the Herrgården pre-school, which has a modern heating- and ventilation system, and a comparison with Östers pre-school which has an older system. An energy survey of Östers pre-school has already been done by a group of three students and all the calculations and values have been collected from that survey. As of today, both pre-schools are heated thru district heating. It will be much easier to make smart and feasible energy-saving-measures by first conducting the energy survey.Herrgården pre-school in Gävle houses 81 children, therteen teachers, one cleaner and one cook. It was finished in the middle of 2009 and the staff has been very pleased with the in-door climate.

This thesis includes an energy survey of the Herrgården pre-school, which has a modern heating- and ventilation system, and a comparison with Östers pre-school which has an older system. An energy survey of Östers pre-school has already been done by a group of three students and all the calculations and values have been collected from that survey. As of today, both pre-schools are heated thru district heating. It will be much easier to make smart and feasible energy-saving-measures by first conducting the energy survey.Herrgården pre-school in Gävle houses 81 children, therteen teachers, one cleaner and one cook. It was finished in the middle of 2009 and the staff has been very pleased with the in-door climate.

This thesis includes an energy survey of the Herrgården pre-school, which has a modern heating- and ventilation system, and a comparison with Östers pre-school which has an older system. An energy survey of Östers pre-school has already been done by a group of three students and all the calculations and values have been collected from that survey. As of today, both pre-schools are heated thru district heating. It will be much easier to make smart and feasible energy-saving-measures by first conducting the energy survey.Herrgården pre-school in Gävle houses 81 children, therteen teachers, one cleaner and one cook. It was finished in the middle of 2009 and the staff has been very pleased with the in-door climate.

This thesis includes an energy survey of the Herrgården pre-school, which has a modern heating- and ventilation system, and a comparison with Östers pre-school which has an older system. An energy survey of Östers pre-school has already been done by a group of three students and all the calculations and values have been collected from that survey. As of today, both pre-schools are heated thru district heating. It will be much easier to make smart and feasible energy-saving-measures by first conducting the energy survey.Herrgården pre-school in Gävle houses 81 children, therteen teachers, one cleaner and one cook. It was finished in the middle of 2009 and the staff has been very pleased with the in-door climate.

Ett arbete om hur jag genom en övningsmetod som jag tagit fram själv avgör om den övningsmetoden gör mig bättre på att hålla konstanta tempon i mitt trumspel..

Every year more than 6000 thefts, to a value of 1.5 billion SEK, are reportedwithin the Swedish building trade. Plus all the indirect costs of having theconstruction site standing still.SafeTool is a newly started company that will try to prevent this problem witha modern technology solution.The key to SafeTool?s solution is RFID ? Radio Frequency Identification ? andthe solution looks like this;All tools are stored in a container on the construction site. Every tool isequipped with a RFID-tag that uniquely identifies the tool. With antennas in thecontainer it is possible to detect when a tool is leaving the container and whenit comes back.

Abstrakt Klämning mellan dörrblad och dörrkarm är en frekvent förekommande olyckstyp som drabbar såväl barn som vuxna i alla åldrar. I genomsnitt drabbas var fjärde svensk någon gång under sin livstid av så pass allvarliga skador till följd av klämning i dörr, att sjukhusvård krävs. Som regel är det handens fingrar som skadas. På marknaden finns ett stort utbud av tekniska lösningar som i någon mån syftar till att förhindra klämskador i kontakt med dörrar. Dock är de flesta av dessa lösningar utformade för dörrens gångjärnssida.

Abstrakt Klämning mellan dörrblad och dörrkarm är en frekvent förekommande olyckstyp som drabbar såväl barn som vuxna i alla åldrar. I genomsnitt drabbas var fjärde svensk någon gång under sin livstid av så pass allvarliga skador till följd av klämning i dörr, att sjukhusvård krävs. Som regel är det handens fingrar som skadas. På marknaden finns ett stort utbud av tekniska lösningar som i någon mån syftar till att förhindra klämskador i kontakt med dörrar. Dock är de flesta av dessa lösningar utformade för dörrens gångjärnssida. För dörrbladets låssida existerar inget klämskydd som kan göra anspråk på att vara heltäckande.

Dooria Sweden AB is one of the main door- and doorframe manufacturers inSweden. They deliver door frames for indoor use for project oriented buildingsites, for these types of building sites the doorpost comes pre-assembled. DooriaAB wants to minimize transport to reduce impact on environment and thetransportation costs of pre-assembled doorframes, this thru simplifying themethod of assembly.The main purpose of this thesis has been to develop a prototype solution thatbrings the three parts of the doorframe together with the same properties regardingstability and tightness of joints as the current method of assembly. A profile ofdemands and wishes were created in collaboration with Mårten Dragstedt, DeputyDirector of Dooria Sverige ABBy following the chosen method the authors have been able to produce a fullyfunctional prototype that meet the demands that were put on the product. Catia V5R20 has been used as an aid during prototype construction and virtual tests.

Kisa Courthouse in the south of ?sterg?tland is a house built in the early 19th century with a typical neoclassical style. With clearly regular symmetrical wooden facade scheme with a central main entrance. The main entrance is a wooden double door with richly decorated portico. the crown moulding above the door consists of a band of dentils with a cornice moulding at the top.

Forming teacher teams is currently the standard way of organizing teachers in Swedish Compulsory Schools. This is the result of a process that started in the 1970s.Traditionally the culture of teaching has been one of isolation. Once the door to the classroom is shut, what happens behind the door is up to the teacher to decide. Over the past thirty years a lot of time has been dedicated to making fundamental changes in the way teachers interact with their colleagues. Today the idea of teachers forming teams is generally accepted but still the core of a Swedish teacher?s job is that of a lone worker.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.