Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Syfte och frågeställningarSyftet med denna undersökning är att ta reda på vad som motiverar elever i årskurs nio till att vilja prestera och få starka betyg i ämnet idrott och hälsa. Samt att även undersöka ifall dessa elever har några ambitioner i ämnet.Frågeställningar:Hur ser elevers motivation ut för ämnet idrott och hälsa?Hur ser ambitionsnivån ut hos elever för ämnet idrott och hälsa?MetodI detta arbete har jag använt mig utav en kvalitativ ansats och intervjuat sex stycken elever för min datainsamling. Intervjuerna transkriberades och bearbetades med hjälp av analyser utifrån två olika teoretiska perspektiv Self- Determination theory och Piagets kognitiva utvecklingsteori inom konstruktivismen.ResultatElevers motivation i årskurs nio består av att eleverna finner rörelseglädje i den fysiska aktiviteten på idrottslektioner och några respondenter lyfte upp betydelsen av den positiva gruppdynamiken i klassen. Elevernas största ambition var betygen, anledningen till att de gör sitt bästa och siktar på att få höga betyg är vetskapen om att betygen spelar en viktig roll när de skall söka in till gymnasiet.

AbstractIn urban societies people spend more and more time indoors, which put great demands on the indoor environment. If the ventilation is to manage the removal of unwanted substances in the indoor air, a good mixing of the air is required. The question arises that, whether the buoyancy forces will counteract a good mixing of the indoor air or not?This report aims to clear up the difficulties whether you need to consider the buoyancy forces or not, when adjusting a ventilation unit. For studying the indoor mixing of the air a two dimensional model is constructed in COMSOL Multiphysics.

Cannibalism can have major influence on fish population dynamics. A prerequisite for cannibalism is that the cannibal and the potential victim meet, and besides density effects, the encounter rate between cannibals and their victims is therefore also largely dependent on habitat use and habitat heterogeneity. In this study I quantified and compared the potential for cannibalism in stream-dwelling European grayling populations in three rivers in Jämtland by means of habitat classifications. I also analyzed population dynamic consequences of varying the potential for cannibalism in terms of intensity, using a physiological structured population model. Findings based on habitat characteristics were that the potential for cannibalism is in general not favourable in these types of streams.

The results and the analysis of this essay are based on an empirical study of women groups in Babati District in Tanzania from 2005. The study has shown that the reason for women in Babati to organize themselves is to overcome traditional and structural obstacles that restrict women?s economical integration. Through the creation of social networks and a common source of income within the group, women are trying to strengthen their position within the household and in society. The significance of empowerment on an individual level is the sense of abilities in everyday life and the feeling of increased options.Social mobilization means that individuals come together and with united strengths and according to a common interest are trying to fulfil articulated goals.

Due to soft grounds in combination with seasonal variation in soil humidity, there is a lack of stands that are possible to cut during spring and autumn in some geographical regions. For Holmen Skog this sometimes means that a large proportion of the contracted private forest is cut during the winter when the ground is frozen. One consequence of this is that the proportion of winter stands in the stand bank of own forest increases while spring and autumn stands becomes a scarcity. This in combination with milder winters, especially when there is a long period of reduced bearing capacity in spring or autumn, means that the situation rapidly can become critical. The overall goal with this study was to generate basic data for decision support in the work to achieve a sustainable distribution between own forest and contracted private forest in the stand bank. The study took place at Holmen Skog, district of Umeå, during autumn 2007 and was based on interviews and an analysis of harvest planning and delivery data. The study showed that there is a problem with how the cutting is distributed between own and contracted private forest during the year and that it foremost is the proportion of winter thinning of own forest that has increased in the stand bank.

This thesis was performed as assignment from Fazer Food Services. The aim was to survey which food additives that were present in the products in the quotation list of one of their suppliers to the Education and Nursing segment. The aim also was to perform a theoretical analysis of these food additives and to make recommendations which food additives are acceptable and which should be excluded from the products in the future. The recommendations are not published in this report, for more information Fazer Food Services can be contacted. Food additives which have already been approved are regarded as safe according to the safety evaluation methods available at the time of approval.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

The purpose of this study was to find out how young children are allowed to influence and affect their daily lives in preschools, as well as teachers? views on the latter. My interest in this topic is born out of my experience of working with both younger and older preschool children. My view is that democratic work with older children is largely based on direct verbal communication while with toddlers it is based on an adult?s interpretation of a child?s often non-verbal expressions.

In today?s technological society, there are increasingly less physical demands on the locomotor system. However, despite that notion strength and function in the hand?s complex biomechanical system are in fact both needed to cope with daily life. The grip function is a main function in the hand and is used in many examples of scientific research, for instance when assessing physical health and predicting the probabilities of premature mortality.

Svensk Växtkraft is the owner of the biogas plant in Västerås. The company is planning to increase their treatment capacity at their biogas plant. In connection to this work it is also possible to make some energy saving changes to the biogas plant. The objective of this study was therefore to make an electricity and heat survey of the biogas plant, a detailed study of the heat consumption in the sanitation step and also a comparison of energy consumption with the present sanitation method and an alternative strategy where the waste is treated in 55 °C during 10 hours (the current method is heating to 70 °C during 1 hour). The energy survey was conducted in close collaboration with staff at the biogas plant. The current during normal operation was measured, power was calculated and multiplied by the time of usage to obtain the energy consumed.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

In the end of the 80´s the area of system development moved into a new era. As a consequence many new methods and development models emerged which in many cases resulted in problems when choosing system development models and methods. As a result of these problems the today standardized modeling language UML (Unified Modeling Language) was created. UML is tailored to support many different types of projects. This is possible because of UML?s capacity to be adjusted and adapted to a specific company environment.The purpose of this bachelor thesis is to investigate how and why companies use UML and what experiences and opinions those who use UML have of using UML in practice.

Ett mönster är uppbyggt av ett motiv som upprepas. Denna upprepning kan fortsätta i all oändlighet. Hållbar antyder långsiktighet. Mönstrets övergripande egenskap är oändlighet. Hur kan denna egenskap hos mönstret nyttjas inom mönsterdesign för att främja hållbar utveckling? Det här kandidatarbetet undersöker mönsterdesignens möjlighet att verka för hållbar utveckling genom att se till begreppet mönster ur ett bredare perspektiv, samt i relation till design för hållbar utveckling.