Sök:

Sökresultat:

1409 Uppsatser om Capacity calculations - Sida 58 av 94

Dokumentationssystem för fjärrvärmenät

The Work has been performed to, and in cooperation with Vetlanda Energi och teknik AB.District heating for commercial purpose started in the USA in 1877. Today the network has grown into big and complex systems, which demand maintenance and service to keep up the security of the delivery. When a district heating network expand, it becomes difficult to perform reliable calculations. For this purposes there are a few suppliers who design and deliver systems for documentation and calculation of district heating networks.Vetlanda Energi och Teknik AB is in the position where they must get a system for documentation and calculation for district heating, and therefore they need a basis to get a system. The target is to write a requirement specification that will follow the basis.The Swedish market has been inventoried, and suitable systems have been selected.

Solenergi på Nya Karolinska Solna

In today?s society climate change has grown to one of the largest global issues. To reduce emissions of greenhouse gases, large changes of the energy system are required. An increasingly popular solution is investments in local production of renewable energy resources like wind, solar or geothermal power. The following report examines the possibility for implementing a solar power plant on the new hospital Nya Karolinska Solna. Two different technologies for extraction of solar energy has been studied, solar thermal collectors  to meet the need of heating and solar cells to satisfy the need for electricity linked to operating the hospital building.

Testikelmått och daglig spermieproduktion hos svenska halvblodshingstar :

Testicular measurements and daily sperm output (DSO) are important factors affecting reproductive capacity of stallions. In the present study testicular measurements of 10 Swedish half-blood stallions were determined (height, length, width and volume). Ejaculates were collected from each stallion once daily for 10 days to evaluate some important seminal characteristics: gel-free ejaculate volume, sperm concentration, percent progressively motile spermatozoa and total number of spermatozoa (TSN). The gel-free ejaculate volume was measured with a graduated cylinder, the sperm concentration was counted in a Bürker chamber, the sperm motility was estimated in a phase-contrast microscope and TSN was determined by multiplying the gel-free seminal volume by the sperm concentration. Testicular measurements were as follows (left and right testis): height 7,5 cm and 7,8 cm, length 10,6 cm and 10,8 cm, width 6,5 cm and 6,6 cm, volume 278,2 cm3 and 293,8 cm3, scrotal width 12,3 cm and total testicular volume 572,0 cm3 .

Glidytor och ytjämnhet med avseende på friktion och tätning

Gliding and sealing functions in Öhlins shock absorbing systems sets great demands onthe contacting surfaces. In this particular case, the bushings and the sealings on acylinder piston. The surface wanted is a surface with both low frictional forces and smallleakage. This study was done with the goals of investigating and determining existingsurfaces due to the frictional force and leakage. How can we in an easy mannerdescribe these?A number of ten front forks were part of a main study.

Riskfaktorer för uppkomst av neurologisk sjukdom vid infektion med EHV-1

During the cultivation season there are a several cropping activities to carry out. At what time these activities are carried out is affecting the result and also on the economy of the crop production. As the production costs are high in potato production, it is important to keep an eye on the economy. Profitability is the most important factor in most crop production systems. If the costs are not covered, it is difficult to justify the production.

Björkbarksextrakt, BBE : en lönsam lösning på betningsproblematiken?

The calculations in this thesis are evaluating the profit as a consequence from treating young stands of pine in Sweden with birch bark extract, BBE. Treatment is to be done with the object to lower or fully reduce the moose browsing on pine. The study is made in three versions. The results from each version separately will follow below. Version I.: The size of the moose population is in no way affected by the reduced resources of food as a consequence of large scale treatment with BBE on pine. Results show profit at a 3 percent level of interest with the exception of treatment program with more than 4 treatments all together and with the exception of Västerbottens Län with an early first treatment. Version II.: The population of moose decrease from 10 to 5 individuals per 1000 ha as a consequence from large scale treatment with BBE on young pine stands.

Mjukvarubaserad 3D-renderare

Abstrakt Produkten som jag har utvecklat är en mjukvarubaserad 3D-renderare. För att göra en sådan produkt är man tvungen att gå djupt in i området 3D och utföra alla beräkningar på egen hand. Dessa tar annars grafikkortet hand om. Denna rapport förklarar varför jag har valt att göra en egen mjukvarubaserad 3D- renderare och vad den är för något och i vilka områden den används. Här förklaras även min syn på programmering, digitala spel, vad programmering innebär för mig och hur min syn på spel har påverkat mig med tiden.

Swedish Meats : motiven bakom försäljningen av kooperationen

In 2007 Swedish Meats, the dominant Swedish meat-producers cooperative sold its slaughtering and processing industry. The goal of a producer cooperative structure is to create value for members through vertical integration, and to strengthen members? market position. When Swedish Meats sold the slaughtering and processing components, it ceased in some respects to serve the function of a cooperative. This is a lost opportunity for both members and non-members, because Swedish Meats as a functioning cooperative could have exploited its dominant market position to positively effect producer?s prices.

Konstruktion av lapputmatningsmaskin

The vision of this thesis was to create a concept that can be used as a base for amachine construction. The purpose of this project was to use different methods todevelop a concept that on the best way meets the sat up requirements. This projecthas been divided into three stages/parts; principle, primary and the final solutionstage.This thesis has been conducted in collaboration with Västkustägg AB. It is aconstruction project designed to construct a machine that will automatically putlabels on the egg packages. Västkust AB wanted to automate this process.

Kommentera och sprid. : En kvalitativ studie i reklamproducenters syn pa? viral reklam i Sverige.

The purpose of this study has been to examine a few Swedish advertisment producers opinions on the subject of viral advertising and especially the ethical aspects of hidden viral advertising. The specified purpose of this paper is to:To clarify the underlying reasons for the use of viral advertising.To clarify the advertising producers ethical views on hidden viral advertising.The essay is based on a qualitive research metod of an abductive nature where the empirical data is derived from interviews with three advertisment producers. Through a stratified selection method we contacted agencies that in one way or another uses digital solutions as an advertisment method. All interviews were conducted via the digital chat room Skype, one of the interviews were conducted with both picture and sound and the other two with audio-only.The following points are the essential conclusions of our study:Hidden viral advertising is seen as a rare promotional method in Sweden today, however, the viral-spread effect is more commonly used.The economic factors together with the spreading capacity of the viral advertising is contributing to one of the biggest reasons behind the use of viral advertising. In addition to these, viral advertising is seen as an effective way to stand out from traditional advertising.Viral advertising where the sender is hidden or unclear is always seen as unethical.

Kalkyl mot verkligt utfall : Analys av kalkyler och kalkylverktyg med avseende på ROT-projekt

När det handlar om ROT-projekt (renovering, om- och tillbyggnad) är det viktigt för entreprenören att uppnå långsiktig lönsamhet. För att säkerhetsställa detta är det av stor vikt att upprätta noggranna kalkyler som håller under hela byggprojektet. I dagsläget finns små marginaler för eventuella kostnadsökningar därmed ytterst lite utrymme för misstag. Eftersom förutsättningarna vid ROT-projekt ständigt varierar beroende på typ av badrum och skadeorsak är det därför väldigt svårt att uppskatta och beräkna kostnader utifrån rådande förutsättningar. Utifrån detta finns det ett behov hos entreprenören att förstå varför kalkylerna avviker och hur man kan undvika detta i framtida projekt.Examensarbetet innehåller både en analys av kalkylerade kostnader och dess verkliga utfall samt en analys av kalkylverktyget Meps.Då ROT-sektorn är stor och omfattande har vi valt att avgränsa oss till badrumsrenoveringar som en följd utav vattenskador.Utifrån analys av kalkyler och kalkylverktyget samt intervjuer med parter både från entreprenör och från beställarsidan har vi kommit fram till en rad slutsatser om hur företaget kan ta fram noggrannare kalkyler i framtiden.Framförallt anser vi att företaget ska föra en tätare dialog med försäkringsbolagen för att vara en del i utvecklingen av kalkylverktyget. Vi anser även att man bör avsätta resurser för att utveckla erfarenhetsåterföringen inom företaget..

Partnering för bättre samarbete men till vilket pris? : En studie av offentlig beställares argument till partnering

The electric vehicle market has potential to contribute to Sweden?s national goal to have a fossil fuel independent transport sector by 2030. However, the market answers to a lot of challenges making it difficult for the market to fully reach its potential. The volume of electric vehicles has seen a steady increase during the last year (2012), although many of these vehicles are mostly for PR purposes or bought by the public sector that wants to lead by example. Still, barriers in the form of high purchase costs, an anxiety for the limited battery capacity and the lack of standardisation are some of the problems that the market is struggling to solve.

Konstruktion av infästning till dysa

The goal of this thesis is to design an attachment between a duct and a pod. A pod is what could be compared to an outboard engine for larger vessels. The pod is placed on the outside of the ship?s hull and can rotate 360 ?. A duct is a large steel ring that can be placed around the propeller on the pod to increasethe propulsion force of the ship in lower velocities.

Inverkan av transgena grundstammar på fruktkvaliteten hos icke-transgena äppelsorten ?Jonagold?

Gene technology has become more and more attractive in plant breeding during the last twenty years. This is probably because it can readily improve the existing commercial cultivars that have only one or a few drawbacks by modifying one or a few genes without changing the main genetic constitution. In this regard, gene technology is more effective than conventional breeding.The aim of this project was to analyze the fruit quality of the non-transgenic apple scion ?Jonagold? grafted on non-transgenic and rolB-transgenic apple rootstocks. The rootstocks used were M9-rolB1, M9-rolB2, M26-rolB and non-transgenic controls M9 and M26.

?Ju mer man vet desto mer kan man bestämma? ? En undersökning av behov, sökning och användning av information vid beslutsfattande i kommunala nämnder.

The purpose of this master thesis is to examine some information aspects of decision-making in Swedish municipal committees. Which are the information needs and how do they emerge? How is the needed information sought and received and which are the sources? How do the members of the committees use information when making decisions? To answer these questions qualitative interviews were conducted with four politicians (two chairpersons representing the political majority and two vice-chairpersons representing the opposition) and three officials in a municipality with a population of about 50 000. The politicians were interviewed in capacity of decision-makers, whereas the officials from the local administration are of interest through their decision-supportive role, which includes providing of reports and other information. The examination indicates that even if the conditions to some extent differ between the committees, the administration is highly influential: Notions and proposals about action may come from inhabitants, organizations, politicians etc., but are handled by the administration, which often is the problem formulating actor, through which the informational needs nearly always are canalized.

<- Föregående sida 58 Nästa sida ->