Maize for silage has been used as fodder in different parts of the world for a long time and has recently become more common also in Sweden. Our cold climate has been a problem as maize is very sensitive to low temperatures and frost. With new varieties and better techniques for cultivation it is now possible to grow maize in the southern and middle parts of Sweden. As for the north of Sweden the length of the cultivation season is a limiting factor as there are too few days with temperatures of over +10 ºC. Maize is well suited for silage making but oxygen-free conditions are required.

This report aims to provide an insight into the particle physics of today, and into the research that goes on within the field. The focus is partly on the recent discovery of the Higgs boson, and partly on how software can be used to simulate processes in particle accelerators. Basic concepts of particle physics and the search for the Higgs boson are discussed, and experimental results, including those from the Large Hadron Collider, are compared with simulations made in MadGraph 5. Furthermore, simple new models of particle physics are created in FeynRules, in order to make simulations based on the models. To support the presentations of these aspects, some of the underlying theory is built from the ground up.

Examensarbetets mål är att beskriva och beräkna Arvidsjaurs och Arjeplogs kommuners framtida bergmaterialbehov med utgångspunkt från bygg- och anläggningsprojekt som pågår och som planeras. Syftet är att få en sammanställning som visar om materialet räcker till eller om det finns behov att öppna nya täkter. Sammanställningen kan med fördel användas av kommunerna som planeringsunderlag beträffande nya vägbyggnadsprojekt. Alla tillståndsgivna täkter i Arvidsjaurs och Arjeplogs kommuner har kartlagts och täkternas kapacitet har också tagits fram. Även alla pågående och planerade vägarbeten kommunvis och årsvis från år 2005 fram till 2009 har karterats.

This essay contains a comparative analysis of Erik Olin Wrights Marxist class analysis and Michael Hardt and Antonio Negris post-Marxist class analysis as presented in their books ?Empire? and ?Multitude: War and democracy in the age of Empire?. I discuss the shift in analytical focus from state level to global level that Hardt and Negri's analysis represent and the ensuing relevance of this for contemporary class analysis. The essay also address the challenge and implications posed to class analysis by the ever increasing economic globalization, from a material production to an ever growing immaterial service economy and the decrease in state power in controlling capital and labor movement. I propose that analytical understanding of class conflict help us to a better understanding of the mechanisms and dynamics that generate social and economical inequalities and that an updated Marxist class analysis still have much to contribute to our understanding to how these issues not only shape our society but also our capacity to counteract them..

The aim of this Master?s thesis is to investigate if the reading habits of teacher students are influenced by merit and descent. The empiric material consists of six questionnaires answered by students at the teacher training with Swedish at the upper secondary school as their first topic. The questionnaire comprised questions about reading habits in the childhood and today and information concerning merits and descent.Pierre Bourdieu?s sociological ideas about cultural capital transmitted from parent to child and the concept of habitus are used as a theoretical framework regarding descent.

Estimation of the variation in the integrated hydraulic conductivity around the Tunåsen infiltration facility - An investigation of the effects of uncertainties in existing informationAlmost half of Sweden?s drinking water volume is produced from groundwater. The main fraction of this is extracted from eskers, some of which allow for very large extraction rates. Despite this, the groundwater volume is not sufficient in some areas. This has led to an extensive use of artificial recharge.In Uppsala, the total volume added through artificial recharge is divided between four infiltration facilities.

Feline odontoclastic resorptive lesion (FORL) is a tooth disease affecting both domestic and wild cats. Although FORL was described as early as the 1920´s, the etiology is still unclear. Several hypotheses have been presented but different studies have obtained contradictory results, and today there is no generally accepted etiology. Teeth affected by FORL are characterized by root resorption with progressive destruction of the tooth structure and alveolar bone as a consequence of clast cell activity. The disease is considered very painful when reaching a certain stage.

The building sector accounted for around a fourth of the total energy usage in Sweden in year 2010 (Energimyndigheten, 2012). Therefore it has become very interesting to achieve a lower energy usage in residential buildings. One way to achieve that is to build so called passive houses. By being very well insulated and have low leakage through the walls, they can reduce the energy usage for heating with a substantial amount. The first passive house was built during the 90?s in Germany; and in Sweden the first passive house was built in Gothenburg 2001.

The spatial population structure of the saprotrophic basidiomycete Tulostoma brumale was investigated at a site in south eastern Sweden. Sporocarps were mapped and collected, and somatic incompatibility tests between mycelial cultures cultivated from the sporocarps were used to identify genets. Calculations of the size and numbers of genets and their distribution were performed. The spatial distribution of the tested sporocarps and the identified genets are presented graphically in a grid. The total number of identified genets within the investigated area (1210 m2) was 27 based on 48 tested sporocarps.

An increased demand for processed goods on the property market has contributed toinvestments within the Swedish sawmill industry. The purpose with this study is to make amarket investigation of pre cut lengths within a defined geographic area. The constituent forthis investigation is HAL (AB Hilmer Andersson) who invests in a new plane facility and twofinger jointing machines in affiliation to their sawmill in Lässerud, the vest part of Värmland.To investigate the demand of pre cut lengths and identifies the value creating factors and costfactors which the customer within the segments industry and property market perceive, havedifferent customer value theories been used. Theories of customer value and the theory aboutoffering has been the source of creating the qualitative interview with a selection of currentand new potential customers for HAL.The result of the study first gives an introduction of HAL?s new offering and a description ofHAL?s current customers, which gives the reader an understanding of why searching for newcustomers is made in the defined area.

During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

The aim of this work is to demonstrate how the net present value (NPV) at the time of the first thinning depends on the spacing after pre-commercial thinning, and show how net value from first thinning in same stand is influenced. This study is performed with models based on non-distant dependent growth models for single trees. Two different growth models have been used, one for cleaning (pre-commercial thinning) and one for thinning. The first one yields stem density distributed over diameter classes. In the second one, (the thinning model), it is possible to choose when thinning should be done, the thinning method, thinning grade and numbers of thinning.

Purpose: The study examines the risk a rising from the acquisition of shares, and its relation to the expected return. We would like to see how a high-risk portfolio is related to a low-risk portfolio. Although studying the portfolios annual performance.Theory: The theories that have been used in the study are, Capital asset pricing model, CAPM and portfolio theory.Method: The study is based on a quantitative method, the time interval is from 2008 to 2010.The annual reports, historical stock prices for companies and the index are used to perform calculations based on the essay theories.Conclusion: The beta value has positive liner correlation with the expected return. When there are bad times in the world, the companies are negatively affected regardless of industry. The Portfolios developed in the same direction during the time period..

From January 1st 2011 the use of Eurocode will be mandatory for all constructionprojects. Eurocode is the common European set of struc-tural design codes which willreplace BKR (Boverkets Kon-struktionsregler). BKR is the Swedish set of structuraldesign codes that was used up until December 31 2010. For consulting firms this willcre-ate a need for them to invest in the standards and in education for thecoworkers. This will involve both time and costs for the company.The purpose and aim of this master thesis is the development of compute examplesand calculations aid by dimensioning with Euro-code.

Background: In Sweden, heart transplantation increases as a method of treatment. Patients undergoing heart transplantation require special needs of care. Nurses have to increase knowledge about experiences that these patients percieve to conform the health care in the future. In this study, health science has been used as a theoretical frame of reference which includes a patient perspective.Aim: The aim of this study was to describe experiences among patients, elder than 18 years old, undergoing heart transplantation.Method: The method was a qualitative descriptive study with a context analysis based on ten scientific articles and an autobiography corresponding with the aim of the study.Results: The results of this study showed six themes about experiences that emerged among patients undergoing heart transplantation: feeling of vitality, existential crisis, importance of social support, destructive feelings, capacity of going on and the experience of quality of life.Conclusion: It?s not a guarantee that the quality of life will increase among patients undergoing heart transplantation and they need a specialist trained nurse available to support at all hours..