Over an extended period of time there have been plans to establish a shared facility in Lennheden to extract groundwater from the Badelunda esker to provide drinking water for the cities of Borlänge and Falun. The city of Falun is dissatisfied with the quality of its drinking water and the city of Borlänge is concerned about the risk of contamination of its existing groundwater supply at its current location. To provide a basis for a decision on this issue, the company Midvatten AB has been commissioned to perform hydrogeological investigations in the area of Lennheden.The purpose of this thesis is to design a functional groundwater model of the area between Lennheden, place of planned extraction, and Övre Tjärna, place of existing extraction, to get a better understanding of the groundwater situation in the area. A groundwater model enables simulations of different scenarios in risk assessment and contaminant transport. The aim of the thesis is that the model can be used as an aid in Midvatten?s investigations in Lennheden and that it also can be used in future projects in the area.The model has been made in Processing Modflow 5.3 and encompasses an area of 19,5 × 11 km along the Badelunda esker and the river Dalälven between Djurmo and Frostbrunnsdalen.

Burkina Faso as well as most sub-Saharan African countries struggle with providing food for a fast growing population. The dominating farming system is agroforestry parklands. Agroforestry parklands can broadly be defined as areas where scattered trees occur on farmlands as a result of selective clearing. The presence of trees in crop fields may in the long term have a positive effect on the production of annual crops. It is commonly discussed, but not proven, that the presence of trees leads to increased groundwater recharge due to higher infiltration capacity of the soil.

This thesis compares different methods for risk assessment of a creosote contaminated site in Vansbro, Dalarna. In a complementary study the importance of using representative data for Calibration and validation of stationary groundwater models is discussed. The time dependency between surface water levels and groundwater levels on the site in Vansbro is evaluated by step response analysis. The results show that the groundwater levels reflect only long-term variation in the surface water levels. Hence the use of such long-term means for Calibration and validation of the stationary groundwater models is the only theoretically defendable alternative.As a first step in the comparison of risk assessment methods the degree of contamination is evaluated on the basis of generic guideline values for contaminated soils, developed by the Swedish Environmental Protection Agency.

This report present a working model for simulation of what happens to colors displayed on screens when they are observed through optical filters. The results of the model can be used to visually, on one screen, simulate another screen with an applied optical filter. The model can also produce CIE color difference values for the simulated screen colors. The model is data driven and requires spectral measurements for at least the screen to be simulated and the physical filters that will be used. The model is divided into three separate modules or steps where each of the modules can be easily replaced by alternative implementations or solutions.

To understand the glass electrode needs knowledge from more than one level. The construction ofthe glass electrode is one part, an other is the composition and structure of glass. The Nernstequation have an important role, but also the sources of errors in the analysis and the Calibration ofthe glass electrode. Focus for this article is how the glass electrode really works and how Gibbs freeenergy made the potential dependent of the concentration of H+and gives the logarithm to thefunction. Nikolskii's ion exchange theory starts to explain the question about how the potentialcreates and Baucke's dissociation mechanism made it more explicit.

New energy resources that can replace petroleum diesel are needed and biodiesel may be an excellent substitute. During storage and use, biodiesel can oxidize and form peroxides, leading to degradation of the fuel. It is therefore important to determine the peroxide content of the fuel. In this thesis the triphenylphosphine method, which involves GC-MS analysis has been compared to the standard iodometric method which involves titration with sodium thiosulfate. Working standards were made to see how well the iodometric method worked and also in order to make a Calibration curve in GC-MS.

Då det köptes in ny utrustning för kalibrering av värmestrålningsmätare till SP, Brandteknik, fanns det ett önskemål om att effektivisera proceduren vid kalibreringen. Vid kalibrering med den befintliga hård- och mjukvaran finns många manuella moment som skulle kunna reduceras.I detta projekt har ett styrprogram utvecklats i programmeringsspråket LabVIEW. Programmet använder ett seriellt kommunikationsprotokoll för att styra den kontroller som reglerar temperaturen i kalibreringsugnen. Programmet ställer in de temperaturnivåer som ska ingå i kalibreringen, upp till tio stycken, och kontrollerar när temperaturen har stabiliserat sig. När den gjort det tas ett antal mätpunkter ut och sparas till en resultatfil.

To make your company change from a conventional workflow to an ICC-based workflow you need tomake investments in time and money. On the other hand you get your reward in terms of a stable andquality safe production. To choose this way of adjusting your company to new routines requires accuracyas well as a great deal of commitment. It is not only about having the right equipment. There area lot of factors that affect the quality of production.Our ambition with this report is to bring out the importance of general thinking when it comes toICC-profiling and to discuss on which basis printing profiles should be created.

Detta examensarbete undersöker forensisk längdmätning i bild, t ex längduppskattning av människor i bilder rörande brottsmål. Problemen identifieras och några av dagens befintliga längdmätningsmetoder diskuteras.Den metod som bäst uppfyller de i arbetet ställda kraven, d v s snabb handläggning, minimal systeminformation, minimalt arbete på plats och exakthet, har valts ut, anpassats och utvärderats. Metoden bygger på att hitta s k gränspunkter och grundplanets gränslinje i bilden och utifrån en i världen känd referenslängd beräkna den sökta längden. Den bakomliggande teorin presenteras och metoden beskrivs i detalj. Funktioner, algoritmer och ett användargränssnitt har implementerats i beräkningsprogrammet MatLab.

The running of gas turbines with low emissions causes high pressure pulsations to arise in the combustion chamber. These pulsations are high amplitude sound vibrations. At some frequencies these are harmful to the gas turbine. Hence these pulsations are monitored to avoid operating conditions where pulsations are specifically harmful. It is necessary to expose the system of known pulsations to verify the functionality of the monitoring process.

This report describes a Bachelor thesis work in which a robotised laser welding cell has been modelled and simulated for the purpose of making a presentation movie. The report shows that the work has been concentrated on making the movie from the modelling phase through the recording of the movie and ending up with the editing of the final presentation movie. A pre-study was made prior the Bachelor thesis work. In the pre-study a literature study was conducted about measurement and Calibration of a welding cell. Measurement of almost all equipment in the entire cell was also conducted in the pre-study.

There is always a need for more effective ways to store energy in order to reduce the human impact on the environment. One step on the way can be the use of flywheels as kinetic energy storage devices. Low frictional losses are essential for a flywheel to be effective. To minimize these losses active magnetic bearings (AMB) can be used to keep the shaft centered instead of the more conventional ball-bearings. AMBs use actuators and a fast control system that needs correct and noise-free measurement data of the shaft position and the current in the actuators to work properly.This thesis explains the process of constructing power electronics and a current measurement system for active magnetic bearings (AMB).

Purpose: The purpose of this thesis is to test for the existence of Capital Structure Arbitrage oppertunities in the equity-credit markets. Methodology: The mispricing of Credit Default Swap contracts are calculated and used as input in an Equity-Credit market trading strategy. The returns are then evaluated with a modified Value-at-Risk simulation. Theoretical perspectives: A Merton-based structural model, CreditGrades, is used for credit pricing and a mispricing-convergence trading-strategy between the credit and equity markets is implemented. Empirical foundation: Daily quotes for the Credit Default Swap spread of 37 European firms were collected for a period of two years, as well as equity-prices for the same period and the previous two years, used for model Calibration.

The dissertation were performed on SP, Technical Institute of Sweden. The dissertation were carried out on the measurement technical department, this dissertation is a part of a bigger project, project ClampCal. One of SP?s returning assignments are flow-measurement. When flow-measurement is performed, the flow has to be stopped so that a meter can be installed in the pipes where measurement is going to take place. At every stop there is time delay in the flow which causes the customers to loose money. This is why SP wanted to find a better solution so that measurement can be done without any stops in the flow. Usage of a so-called Clamp-on meter was considered, but since the measurement uncertainty is too large it takes some investigation on the parts where the largest uncertainties occur and thus find a solution that can diminish the uncertainty as much as possible. The parts that were considered to have an opportunity to reduce measurement uncertainties were the fluid temperature, its characteristics and the pipe geometry and its characteristics. For the fluid temperature a Pt100-sensor with four different radii for various pipes was used.

New Zealand is currently the third largest global producer of kiwifruit and thus plays an important role in the international market. Exports of kiwifruit are also of significant horticultural value for New Zealand and in 2007 the kiwifruit industry accounted for export values of NZ$790 million. The global kiwifruit market has experienced substantial changes in recent years and is likely to change significantly in the near future due to developments in production sources, adjustments to trade policy settings and shifts in consumer preferences. The New Zealand kiwifruit industry needs to consider what the impacts of these changes might be so that future strategies can be constructed effectively. Little quantitative modelling has been done in New Zealand to consider the impacts of changes to the global kiwifruit industry. The major contribution of this research was the development and Calibration of a kiwifruit industry-specific partial equilibrium trade model. The model was then used to examine the impacts on New Zealand producers of these trade-related changes in the global kiwifruit market.