This paper investigates the methods used by teachers when teaching elementary mathematics to children with Swedish as their second language. The original mathematical terminology derives from Latin, Greek and Arabic, this terminology is not of great importance in this paper, the everyday language spoken in elementary classes when teaching mathematical concepts and Calculations to younger children is. The use of everyday language is an advantage for children with Swedish as their second language as mathematical problems presented in a more plain language is easier to comprehend and solve than problems in mere numerals. Special teachers in home language classes often have the task of clarifying the mathematical concepts, introduced to the children during mathematical lessons, in the pupils first acquired language. A qualitative method was used in this study.

Design of a house requires knowledge of both technology and economics. Heating and ventilation shall be designed, costs are calculated and estimated and requirements must be fulfilled. Which heating system is to be elected is also a difficult choice, especially with rising energy prices as a factor.The choice of energy system is not always given, because it depends on several factors. Below is a comparison between district heating, geothermal heat pump and electric boiler from an economic standpoint. In a previous report appears district heating and geothermal heat pump as the best options.

The shooting sport is one of the most widespread sports in the world and it isbeing practice in most countries. Based on their own experiences, in competition -and hobby shooting, the client M4Solutions found a demand and need for ashooting target that is manufactured in Sweden.The purpose of the project has been to develop, with the help of Marcus Walldén,two shooting targets from idea to finished product. These two shooting targets,Plate Rack Target and Dueling Tree, would each be equipped with a mechanicalresetting system but will in the future have the ability to be provided with anelectronic resetting system.The project from the client was divided into two theses. One of these two, writtenby Marcus Walldén, focused on the tripod parts and the overall design work forboth Plate Rack Target and Dueling Tree. The thesis that is presented in thisreport have focused on resetting systems, the design of protective plates and otherperipherals for both shooting targets.This work has primarily been in CAD environment where design, constructionand development has been given free rein.

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough Calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

This report covers the thesis done by mechanical engineering at the engineering program at the University of Halmstad. Student Work Development of packaging in the food industry includes 15 credits and has performed over 20 weeks in spring 2009. The thesis work is a compulsory part of education and aimed at the student must apply the knowledge it has given during training in a project related to reality. Student work has been carried out in cooperation with Hanson & Möhringen AB and the project's main objective was to develop an environmentally friendly packaging to their brand Falk Salt. When salt is one of the world's cheapest commodity was packing all the costs have to be as low as possible.

This Bachelor?s thesis consists of two parts; one with prefabrication (prefab) in focus and thesecond part includes detail design of a house project. These parts are linked together by designingsome parts of the house project as prefabricated.The focus section investigates how prefabrication can act time-, costs- and environmentallyeffective to a building project. This is investigated by combining literary sources with sourcesbased on reality in the shape of interviews. The result of the investigation is that prefabcould acteffectively on previously mentioned factors,if this way of building is used in a proper way.The detail design of the house started in a residential area with a new local plan in Huddinge,named Sjöängen II.

Vattenfall Heat Uppsala runs the waste incineration plant in Uppsala, which produces district heating, process steam, district cooling and electricity. Vattenfall Heat Uppsala has decided to introduce an energy management system with the aim to increase the energy efficiency of the plant. The basis in such a system is to make an energy mapping.In this thesis an energy mapping has been performed at the waste incineration plant with the aim to identify and determine the size of energy flows. The investigated energy flows are used fuel, produced and used steam, produced district heating and cooling. Also the use of electricity to run the processes has been investigated.

This thesis is done in cooperation with SWECO Energuide in Växjö. They have been assigned by SKB in Oskarshamn to renew their electrical power supply and the ancillary processing systems in their Central provisional storage of spent nuclear fuel, CLAB. Today in the CLAB facility, the spent fuel is cooled down with water pumps, driven by asynchronous induction motors, where the water is regulated by mechanical valves to the desired flow. After the upgrade, the engines will be powered by AC drives that can control the pumps by changing the rotational speed and thus change the water's cooling effect on the nuclear fuel. In this study, I investigated the interference AC drives causes the feeding network and how to go about averting them.

This master thesis is intended to give an increased understanding of the stress state in an axle, which is assembled in one of Atlas Copco?s mountain drilling rigs. The main problems investigated were how the axle is affected when the bearing is worn, when the pretension is varied, and how to dimension the axle. Answers to these questions were found by using hand Calculations, practical testing and with Finite Element analyzes. The dimensioning of the axle is currently based on the bending stress, but the author?s opinion is that the axle should be dimensioned considering the equivalent stress.

In the last decade, member states of the European Union have adopted a range of measures to decrease the dependency on fossil fuels. This has led to an increased use of biomass in heat and power production. In some countries, the lack of forest resource has led to large scale power producers importing their biomass needs. Due to high energy content and homogeneity, wood pellets have become an internationally traded commodity used for large scale power production. The Baltic States have emerged as one of the largest wood pellet exporting regions in Europe.

This paper is a literature review that examines how good mental calculation skills benefit pupils, which could work as a valuable learning tool for future teachers. The study addresses four key questions: ?What are the advantages of proficient mental Calculations??, ?What strategies exist for mental calculation skills??, ?How can teachers accommodate their teaching to develop pupils? mental calculation skills?? and ?What has arithmetic looked like in different eras and what algorithms have been used??. Through literature searches in search engines, scientific articles were found, which formed the basis for the result segment. This was divided into two parts: A historical and a didactic overview.

Title: Pricing of IPO:s on the Swedish stock market Authors: Mikael Gustavsson Martin Kvist Henrik Wannberg Tutor: Anders Hederstierna Problem: There are certain sets of problems for underwriters when they are pricing potential stock-exchange companies. The problem partly consists of estimating the demand at an IPO and also to accurately value the business in comparison to the market. To set the price per share is problematic, since the company carrying out the public offering wants to optimise the amount of capital at the same time as they want the share to be subscribed in full. If the IPO would not be carried out, it could cause harm to the position of the underwriters. Purpose: To investigate whether underpricing exists associated with IPO:s on the Swedish market during the period 1995-1999. Method: The collection of data has been achieved by means of: Internet, E-mail and telephone calls. Conclusions: We have reached the conclusion that oversubscribing in comparison to the return at an IPO has an average growth of 3.3 per cent the first day, on every occasion of oversubscribing. For the studied population, including 138 initial public offerings, the average market value rise is 15 per cent the first day. When we made our Calculations, adjustments have been made for the general index of Affärsvärlden (AFGX).

This degree project has been performed with Mega Teknik AB in Landskrona. The project has resulted in a workplace for the cable installers of Mega Teknik. The workplace contains a workbench and a cart.The first stage in this project was to make an analysis of the current workplace to identify the needs the installers had.The different principle construction proposals of how the workbench would look like and which functions it would have was made during brainstorming, in groups and alone. These proposals were compared against each other using a functional analysis that has been put up to get the principle construction that fulfilled most points in this analysis.The proposal chose for further work was a cart and a bench with a module intends, the table got a formulation that creates a better reach for the installers.This proposal was generated in Catia V5 to get a better overview of the suggested proposal.During the primary structure phase drawings over all the products were made and the components were chosen. Calculations were made and the product got the dimension required.

Aeroseum is an aviation museum located in an old military underground hangar. The ventilation system in the hangar is designed for the military purpose of the hangar. This design includes a solution with air flowing through the space between the construction of the hangar and the rock surface. The solution is intended to avoid a buildup of inflammable gases. This design leads too high humidity levels in the hangar.

In the spring of 2014 Sweco Systems AB were commissioned to design a ventilation system for a newly built preschool in Linköping. Terms from the client was that it cost efficiency would cope with the energy demands that are placed on the building. The unit chosen was a cross-flow heat exchanger, and this work is to compare it with two other heat exchangers to see if a more energy and cost efficient could have been chosen. The heat exchangers that was chosen for the comparison was a rotating- and a counterflow heat exchanger. Simulations have been made to the different heat exchangers by the manufacturers.