Purpose: The study examines the risk a rising from the acquisition of shares, and its relation to the expected return. We would like to see how a high-risk portfolio is related to a low-risk portfolio. Although studying the portfolios annual performance.Theory: The theories that have been used in the study are, Capital asset pricing model, CAPM and portfolio theory.Method: The study is based on a quantitative method, the time interval is from 2008 to 2010.The annual reports, historical stock prices for companies and the index are used to perform Calculations based on the essay theories.Conclusion: The beta value has positive liner correlation with the expected return. When there are bad times in the world, the companies are negatively affected regardless of industry. The Portfolios developed in the same direction during the time period..

From January 1st 2011 the use of Eurocode will be mandatory for all constructionprojects. Eurocode is the common European set of struc-tural design codes which willreplace BKR (Boverkets Kon-struktionsregler). BKR is the Swedish set of structuraldesign codes that was used up until December 31 2010. For consulting firms this willcre-ate a need for them to invest in the standards and in education for thecoworkers. This will involve both time and costs for the company.The purpose and aim of this master thesis is the development of compute examplesand Calculations aid by dimensioning with Euro-code.

This report aims to provide an insight into the particle physics of today, and into the research that goes on within the field. The focus is partly on the recent discovery of the Higgs boson, and partly on how software can be used to simulate processes in particle accelerators. Basic concepts of particle physics and the search for the Higgs boson are discussed, and experimental results, including those from the Large Hadron Collider, are compared with simulations made in MadGraph 5. Furthermore, simple new models of particle physics are created in FeynRules, in order to make simulations based on the models. To support the presentations of these aspects, some of the underlying theory is built from the ground up.

During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including Calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

Scania?s discount rate - the return requirement of investments - refers to Scania?s WACC or weighted average cost of capital. The capital markets return requirement on equity and the credit market interest cost of borrowing is weighted to become the single discount rate, the WACC. The purpose of this study is to investigate which asset pricing model of APT and CAPM Scania should use in their WACC Calculations. The company now uses a group WACC of 11 percent which is used in all company levels.

Nanofiltration is a proper way of preparation of drinking water. The process has a lot in common with reverse osmosis where a semipermeable membrane is used to separate a pure water flow from the remaining water. A pilot plant was used to ensure that nanofiltration is a suitable technology for a specific waterworks station in Glemmingebro, Ystad. The purpose was also to find out if a pH-adjustment is needed for feed water in a possible full scale plant.  In this case nanofiltration is used mainly to remove sulphate and calcium since the raw water contains concentrations of these substances which exceed the limits for potable water. It is important to receive a high recovery (RC), otherwise the deliviery of water won?t be high enough.

This report aims to provide an insight into the particle physics of today, and into the research that goes on within the field. The focus is partly on the recent discovery of the Higgs boson, and partly on how software can be used to simulate processes in particle accelerators. Basic concepts of particle physics and the search for the Higgs boson are discussed, and experimental results, including those from the Large Hadron Collider, are compared with simulations made in MadGraph 5. Furthermore, simple new models of particle physics are created in FeynRules, in order to make simulations based on the models. To support the presentations of these aspects, some of the underlying theory is built from the ground up.

This report aims to provide an insight into the particle physics of today, and into the research that goes on within the field. The focus is partly on the recent discovery of the Higgs boson, and partly on how software can be used to simulate processes in particle accelerators. Basic concepts of particle physics and the search for the Higgs boson are discussed, and experimental results, including those from the Large Hadron Collider, are compared with simulations made in MadGraph 5. Furthermore, simple new models of particle physics are created in FeynRules, in order to make simulations based on the models. To support the presentations of these aspects, some of the underlying theory is built from the ground up.

With this paper we intend to investigate what kind of benefits there are by adding commodity futures to a well-diversified portfolio. Since the last fifteen years the commodity speculation has grown tremendously, which partially can be explained by that commodities exposes the investor to certain factors other than an investment in equities. According to our Calculations the commodity futures have outperformed stocks during our research period, which partially could be explained by the increasing demand of physical commodities in developing countries e.g. India & China (Akey, 2005). By constructing different portfolios consisting of equities and corporate bonds we could investigate whether our portfolios will benefit from commodity futures and how this will vary over different levels of risk.

Adjustment to a neutral colour balance when printing was the starting point in this degree project. Onthis base ICC-profiles were evaluated and assessed. The survey was concentrated on the similarity betweenreproductions on different papers with various ICC-profiles. The colour balancing introduced aconsistent variable between four graphic papers. With raised uniformity the probability increased toreceive similarities between the various combinations of ICC-profiles and papers.Numerous of measurements and Calculations have been carried out, mainly to confirm whether or notadjustment to a neutral colour balance is possible and repeatable.

This degree project has been carried out in cooperation with Gedevelop in Helsingborg.Gedevelop has developed a camera that can calculate the weight of a liquid glass mass.Because of the density and viscosity changes in the glass, the weight information issometimes incorrect given. Glass industry is today addressing the problem by an operatorperforming a manual weighing of a few bottles which, in turn, calibrates the camera system.The project aimed to develop an automated system to control the weighing of glass bottles forglass industries. This system must be so flexible that it can be easily mounted on plants withdifferent production equipment around the world.The project includes design and construction of equipment that meets the requirementsformulated together with Gedevelop. Work has been done both in Halmstad and Helsingborgand has included both Calculations and review of the theory to understand the forces thatinfluence the design of different construction parts. A prototype was produced that meets theoperating requirements for the design and can be used in testing features.

Intention: The purpose of this thesis is to see if an active investment decision in the Swedish Premium Pension System would result in a higher return than a non-active investment decision. A non-active investment decision is equivalent to leaving the money in AP7 Premium Savings Fund.Method: This thesis is a statistical analysis and has a descriptive character in which the Calculations are based on secondary data, thus the thesis has a quantitative character. Furthermore three active portfolios in different risk categories have been chosen. These portfolios are compared with the AP7 Premium Savings Fund?s returns.

This report aims to provide an insight into the particle physics of today, and into the research that goes on within the field. The focus is partly on the recent discovery of the Higgs boson, and partly on how software can be used to simulate processes in particle accelerators. Basic concepts of particle physics and the search for the Higgs boson are discussed, and experimental results, including those from the Large Hadron Collider, are compared with simulations made in MadGraph 5. Furthermore, simple new models of particle physics are created in FeynRules, in order to make simulations based on the models. To support the presentations of these aspects, some of the underlying theory is built from the ground up.

The purpose with this work was to investigate some alternatives for an effective handling with grain, to find the most economic alternative. It is not common that moisture content is below 14% when harvesting grain in Sweden. To store the grain safe it has to be preserved in some way. I have described some of the most common systems for preserving grain in this paper. I have used the systems as a basis when I made Calculations in handling the grain for a company. I have chosen a company placed in south of Sweden. The productions are crop farming and pork.

The purpose of this study has been to examine whether the bottom fauna of the stream Stensjöån, has been negatively influenced since the harvesting of peat began on the nearby peat moss Skäftesmyr or not. Comparison has been made with the results of index Calculations from earlier examinations in the stream, two calculated indexes has been made, Danish fauna index and ASPT-index. The sampling was made with the kick sampling method, SS-EN 27 828. Three locations were chosen for the examination, one upstream from the peat moss, one just downstream from where the brook from the peat moss joins Stensjöån and a third location near the outlet of the stream to the lake Stensjön. The samples were sorted and the found animals identified to the taxonomic level required for the calculation of the two indexes.