The purpose of this study is to explain how the value of sawn wood changes when sawn wood are cut in 30 respective 60 cm lengths. The raw material into the saw mill will mainly be bucked in 30cm and 60 cm modules. There will also be two alternatives where the timber will be bucked special lengths, 370, 490 and 550 cm but also in 490 and 550 cm.The method used for the study is to simulate both cutting and sawing the woods. For cutting the simulator Timan is used and for sawing the simulator Timberopt is used. When data is generatedfrom the simulators, Calculations of some key figures is done and also how much the revenue need to be increased for the sawn wood in order to cover for the increased costs of changing sawn woodfrom 30 cm to 60 cm modulesThe conclusion is that the single biggest reason, impacting the value of the sawn wood is the cutting at the saw mill.When going from 30 to 60 cm modules, the impact will be that the customers to the saw mill must pay more to increase the revenue by at least 10% for the sawn wood in order to justifice the changein production.It is also possible to increase the value of the products further by bucking the timber in three lengths, 370, 490 and 550 cm, in order to get 12 % increase of the share of longer sawn wood (>= 480 cm)..

The purpose of this report is to simplify the process of designing carbon fiber strengthening for existing concrete constructions, specifically beams. The intention has been to establish a flow chart containing information on the necessary testing and Calculations for the design, to as far degree it is possible satisfy the requirements stipulated by Swedish and by extension, European authorities.To do this the report will examine a parking garage situated underground by Akademiska Sjukhuset, Uppsala. The parking garage was built in the mid-seventies, and has in recent years been subjected to a greater load than designed for by the construction of a road on top of it. FEM-Design has been used to obtain the internalforces of the beams and thereby determine whether they are in need of strengthening or not and thereafter design the strengthening according to Täljsten (2006) with some corrections from Täljsten (2011) due to new regulations.The result of this report is that the flow chart used is viable to design carbon fiber strengthening, atleast with the conditions met in our reference project.The conclusion drawn after working with this report is that there is a need for a clear standard for carbon fiber strengthening , preferably a standard that can be used throughout Europe..

This report aims to provide an insight into the particle physics of today, and into the research that goes on within the field. The focus is partly on the recent discovery of the Higgs boson, and partly on how software can be used to simulate processes in particle accelerators. Basic concepts of particle physics and the search for the Higgs boson are discussed, and experimental results, including those from the Large Hadron Collider, are compared with simulations made in MadGraph 5. Furthermore, simple new models of particle physics are created in FeynRules, in order to make simulations based on the models. To support the presentations of these aspects, some of the underlying theory is built from the ground up.

This report aims to provide an insight into the particle physics of today, and into the research that goes on within the field. The focus is partly on the recent discovery of the Higgs boson, and partly on how software can be used to simulate processes in particle accelerators. Basic concepts of particle physics and the search for the Higgs boson are discussed, and experimental results, including those from the Large Hadron Collider, are compared with simulations made in MadGraph 5. Furthermore, simple new models of particle physics are created in FeynRules, in order to make simulations based on the models. To support the presentations of these aspects, some of the underlying theory is built from the ground up.

This project includes a small study of Västerås city's housing needs, and a proposal on theuse of the property 1:207, Lantmännens silo in the Eastern Harbour, Västerås.The project intends to produce a basic study of the useful systems for this rebuilding projectwith regards to sustainable development and energy saving light buildings.The end result, which consists of a detailed visualization of the proposal, intends to becomean iconic natural focus for the Eastern port of Västerås and an example of the use andadaptation of existing structures.The property must also link the eastern parts of Västerås with the center through anextension of Mälarleden.The work has been performed through literature studies, site visits, contacts with the City ofVästerås and by Calculations.The proposal consists of architectural proposals drawings and visualizations.Furthermore, a suggestion is given of how the property can be used and fitted into theoverall plan for urban density development currently underway in the city of Västerås.Computer programs used have been Microsoft Office Excel, AutoCAD and ArchiCAD..

This report aims to provide an insight into the particle physics of today, and into the research that goes on within the field. The focus is partly on the recent discovery of the Higgs boson, and partly on how software can be used to simulate processes in particle accelerators. Basic concepts of particle physics and the search for the Higgs boson are discussed, and experimental results, including those from the Large Hadron Collider, are compared with simulations made in MadGraph 5. Furthermore, simple new models of particle physics are created in FeynRules, in order to make simulations based on the models. To support the presentations of these aspects, some of the underlying theory is built from the ground up.

This report aims to provide an insight into the particle physics of today, and into the research that goes on within the field. The focus is partly on the recent discovery of the Higgs boson, and partly on how software can be used to simulate processes in particle accelerators. Basic concepts of particle physics and the search for the Higgs boson are discussed, and experimental results, including those from the Large Hadron Collider, are compared with simulations made in MadGraph 5. Furthermore, simple new models of particle physics are created in FeynRules, in order to make simulations based on the models. To support the presentations of these aspects, some of the underlying theory is built from the ground up.

This report aims to provide an insight into the particle physics of today, and into the research that goes on within the field. The focus is partly on the recent discovery of the Higgs boson, and partly on how software can be used to simulate processes in particle accelerators. Basic concepts of particle physics and the search for the Higgs boson are discussed, and experimental results, including those from the Large Hadron Collider, are compared with simulations made in MadGraph 5. Furthermore, simple new models of particle physics are created in FeynRules, in order to make simulations based on the models. To support the presentations of these aspects, some of the underlying theory is built from the ground up.

This report aims to provide an insight into the particle physics of today, and into the research that goes on within the field. The focus is partly on the recent discovery of the Higgs boson, and partly on how software can be used to simulate processes in particle accelerators. Basic concepts of particle physics and the search for the Higgs boson are discussed, and experimental results, including those from the Large Hadron Collider, are compared with simulations made in MadGraph 5. Furthermore, simple new models of particle physics are created in FeynRules, in order to make simulations based on the models. To support the presentations of these aspects, some of the underlying theory is built from the ground up.

This report aims to provide an insight into the particle physics of today, and into the research that goes on within the field. The focus is partly on the recent discovery of the Higgs boson, and partly on how software can be used to simulate processes in particle accelerators. Basic concepts of particle physics and the search for the Higgs boson are discussed, and experimental results, including those from the Large Hadron Collider, are compared with simulations made in MadGraph 5. Furthermore, simple new models of particle physics are created in FeynRules, in order to make simulations based on the models. To support the presentations of these aspects, some of the underlying theory is built from the ground up.

This report aims to provide an insight into the particle physics of today, and into the research that goes on within the field. The focus is partly on the recent discovery of the Higgs boson, and partly on how software can be used to simulate processes in particle accelerators. Basic concepts of particle physics and the search for the Higgs boson are discussed, and experimental results, including those from the Large Hadron Collider, are compared with simulations made in MadGraph 5. Furthermore, simple new models of particle physics are created in FeynRules, in order to make simulations based on the models. To support the presentations of these aspects, some of the underlying theory is built from the ground up.

This report aims to provide an insight into the particle physics of today, and into the research that goes on within the field. The focus is partly on the recent discovery of the Higgs boson, and partly on how software can be used to simulate processes in particle accelerators. Basic concepts of particle physics and the search for the Higgs boson are discussed, and experimental results, including those from the Large Hadron Collider, are compared with simulations made in MadGraph 5. Furthermore, simple new models of particle physics are created in FeynRules, in order to make simulations based on the models. To support the presentations of these aspects, some of the underlying theory is built from the ground up.

The Göta älv-bridge is a welded steelbridge which is located in Gothenburg,it connects the inner city of Gothenburgwith the island Hisingen. Cracks wasdiscovered in the steel in 1999-2000which started an investigation of thebridge to clearify the condition of thebridge. The conclusion was a monitoringsystem based on laser light sent throughan optical fiber.This report describes the bridge, thedamages, the monitoring system and thetraffic on the bridge.Stefan Pup, at Vectura Borlänge was mysupervisor during this work. In myinvestigation the costs of themonitoring system and the costs ofclosing the bridge is compared andevaluated. The biggest investigatingpart is the costs of closing the bridge.The results of my investigations is thatclosing the Göta älv-bridge would cost 1107 300 SEK / day.

In this paper the possibilities to replace metal with plastic in products for the building industry were looked into. The first part was a market examination where several suitable products were found. After evaluation the door latch for in-house doors was selected to be re-designed to better suit the properties of plastic.New types of mechanisms were designed with different functions that use the benefits of plastic materials. Models of these mechanisms were developed to evaluate their function. The components in the different mechanisms were adapted for manufacturing with injection moulding.To confirm that the plastic material could handle the appearing stresses Calculations on the most vulnerable parts were carried out.

Aim: The aim of this study is to do a comparative study between Swedish Ethical equity Funds with Swedish traditional equity funds in terms of return, risk and risk-adjusted return.Theory: Sharpe ratio and Modigliani-Modigliani.Method: The essay will be based on a quantitative research method in which secondary data is the basis for the Calculations. A statistical analysis was applied.Conclusion: The study concludes that there is no significant difference between the ethical fund group and the traditional fund group in terms of return, risk and risk-adjusted returns. The traditional fund group was those who had the best returns but only by small margins..