Scania?s discount rate - the return requirement of investments - refers to Scania?s WACC or weighted average cost of capital. The capital markets return requirement on equity and the credit market interest cost of borrowing is weighted to become the single discount rate, the WACC. The purpose of this study is to investigate which asset pricing model of APT and CAPM Scania should use in their WACC calculations. The company now uses a group WACC of 11 percent which is used in all company levels.

The purpose with this masters thesis was to model the scanner in a system for laser bathymetry. The model was then used to develop a controller for the scanner so a good search pattern was achieved. Two different types of models have been tested, a physical model and a Black Box model of Box Jenkins type. The physical model has been derived from Lagranges equations. Identification experiments have been used to compute the Black Box model and to find the unknown parameters in the physical model.

In the middle of Australia there is a city called Alice Springs. The city has one of the highest amounts of daily sunshine hours and sun irradiation in the world. The Australian Government runs a project called Solar Cities, and Alice Springs is one of the participators. The main part of the goal with the Solar Cities project is to increase the amount of electricity generated by solar power and by doing that lower the impact on the environment. This thesis examines the possibilities for construction of a large scale solar power plant in Alice Springs. This is done to determine the potential of creating a more sustainable energy system in the city.

Numerical simulations play a vital role in both static and dynamic stability assessment of electric power systems and the foreseeing of voltage collapse. Simulations performed by Svenska Kraftnät(SvK) are mainly done in the specialized voltage collapse predicting software tool, SPICA and the more all?purpose software tool, ARISTO.The grid operators at SvK use SPICA to predict the maximum transfer limit at specified sections (in this report the section in concerns is the southern part of Sweden i.e. interface1 4). SPICA is mainly used as an online application by using actual states from the grid, these states update every quarter of an hour.This thesis is a continuation of the master thesis SPICA ? ARISTO JÄMFÖRELSE by Jakob Katzman and Johan Fält.

Energy costs are high nowadays and that is the reason why the energy consumption needs to become as small as possible in most of the companies. To accomplish the small energy usage one needs to map the energy flows, study them and monitor them. One method that can be used for this is energy balance calculation. The method gives an opportunity to separate different energy flows and see where each flow is heading. There is also another method which is more advanced than energy balance calculation.

In the middle of Australia there is a city called Alice Springs. The city has one of the highest amounts of daily sunshine hours and sun irradiation in the world. The Australian Government runs a project called Solar Cities, and Alice Springs is one of the participators. The main part of the goal with the Solar Cities project is to increase the amount of electricity generated by solar power and by doing that lower the impact on the environment. This thesis examines the possibilities for construction of a large scale solar power plant in Alice Springs. This is done to determine the potential of creating a more sustainable energy system in the city.

We have been looking at three different types of agriculture in Södermanland, in the middle east of Sweden. We call the different types for Intensive, Extensive and Mix. The purpose is to get an economic defensible plan for how to run different farm sizes. We also have been looking at the working hours and how many hours the different types will give. We have a farm called Taxinge Gods as our pilot farm. Taxinge Gods grow 407 ha land and is located 60 km southwest from Stockholm.

In this report an MCNP (Monte Carlo N-Particle) model is described for the reactor vessel at Ringhals 2. The model is validated against the specific activity in neutron dosimeters, extracted in 1977, 1984 and 1994. The validation showed that the calculations of the model are within the requirements of a maximum of 20 percent uncertainty for every neutron dosimeter except one, extracted after the first cycle. The uncertainty of this cycle was mostly due to the operation data rather than to the MCNP model.The model has been used to investigate various questions concerning radiation damage. The reliability of the traditional measure of radiation damage, fast neutron flux (En > 1MeV) has been evaluated.  This has been done by taking the ratio for this and another measure of radiation damage, DPA (Displacement Per Atom), for various positions and layers.

The aim with this study was to collect fundamental information, and to plan, a windpower farm in Juddhult , Småland in southern Sweden. The goal is to collect the bestavailable projecting planning support. The pieces of this projecting planning supportthat will be presented is; Environmental Consequence Description (MKB), productioncalculations, comparisons between different plant types, economic calculations, evaluatethe economy and give some farm design suggestions. The imagined wind farm will belocated in forest environment and which may cause a number of new problems. Specialinterest that will be affected, where special consideration because of the forestenvironmental is requested is, hunting, wetlands, ancient monuments and windturbulence.

AbstractAbetong in Falkenberg manufactures, among other things, small prefabricated concrete buildings for housing various installations, such as electric transformers.The aim of this dissertation is to reduce the time needed to design such buildings, by way of finding a number of standardized buildings. Standardized in such a manner as to incorporate both the needs of the manufacturer (Abetong) and its customers.To analyze the needs of the parties the work has included a market survey and calculations on the strength of these buildings.One survey was a letter questionnaire to all of Abetong?s customers who have, in the past, ordered these types of building. The aim of the questionnaire was to establish how the customers want these buildings designed.Another survey conducted was an inventory of all of Abetong?s previous projects where these types of building were manufactured.

Purpose of the thesis is to construct a tool for car wheel change. Car wheels can be heavy and hard to handle and therefore the company Movomech intends to develop a tool that makes wheel change easier. Movomech does not have any similar product and because of this the work was condition less.The intended users of the product is tire workshops and there for the work began with investigation of these. The reason of the investigation was to see how wheel change is done and how tire workshops are planed. The tire workshops? crew?s opinions were also considered and above all one important conclusion was made.

Evaporation is a part of the chemical recovery department at wood pulping mills. The purpose of evaporation is to remove water from the black liquor, which makes the liquor combustible. The process is very energy demanding, and having a well-functioning model of the system is of greatest interest. The model can then be used to study energy consumption and to test different control strategies. Two models have been developed during the master thesis.

This examination paper is an energy-inventory of Soldathemmet at the regement in Halmstad, in colaboration with Fortifikationsverket in Halmstad. The building is first an foremost for the soldiers, where they can go for a cup of coffee or watch TV. There is also a museum and a drivers school in the building. Calculations have been done with two computerprograms; VIP+ and ISOVER Energy. The results were well matched with the statistics that were provided by Fortifikationsverket.

The purpose of this thesis is to evaluate and update load curves for Fortum Distribution AB. Theload curve method is a tool used to forecast the strain of an electric grid. The method is based oncustomer annual energy consumption, outdoors temperature as well as customer category. Theload curve method was established by Svenska Elverksföreningen at the start of the nineties andfocus was put on standardizing annual energyconsumption, in order to make the method usableacross the nation. Present consumption patterns have changed since the original load curves wereproduced, which leads to a need to update the load curves.The work began with an update of present load curves according to recommendation taken fromanother earlier thesis.

A possible way to reduce pollution and slow down the process of global warming is to increase the usage of renewable energy sources. One of these renewable energy sources is solar power. With the aid of solar panels and solar cells the energy from the sun can be transformed into both heating and electricity. The requirement to use the sun in this fashion is a suitable surface, for example a big roof, an angle between 40-60 degrees and that the surface should be exposed to the south. Almost every farm meets these requirements.