This master thesis presents a Model for Evaluating and Managing Interruption Risks in connection with Business Continuity Planning (BCP), developed for Swedwood International. The model consists of a template with instructions. The model should be easily understood and useful for establishing a plan for BCP. This is achieved by including the contents and procedure of BCP and the main supplychain risks in the model. The purpose of a BCP plan is to describe how an enterprise will return to business as usual after an interruption, e.g.

Då mängden information bara ökar, så ökar även behovet att ha åtkomst till informationen lättillgängligt. Detta skapar då ett behov för ett gränssnitt som kan söka bland informationen. I detta arbete har det undersökts om en implementation av Vector Space Model ger mera relevanta resultat jämfört mot en enklare implementation som inte baseras på Vector Space Model. Sökningen utförs i en relationsdatabas med ett inverterat index, databasen fylls med data ifrån internetforumet Stack Overflow. Genom att bygga en sökmotor som returnerade två olika resultatlistor för varje sökning så fick tio användare testa och utvärdera resultatens relevans.

The environmental debate is more intensive than ever before and the demands on companies increase. There are a number of methods to make it easier for the companies to fulfil the demands. Life Cycle Assessment (LCA) end ecodesign are some of the methods that can be used. Syntronic AB has the possibility to reduce the products´ environmental impact in the design phase. Therefore it is important for the company to make it possible to visualize the negative environmental impacts a product can cause in an easy way. It is also important to visualize for there clients if any improvement is possible. The purpose of this thesis is to develop a simplified model.

This paper presents a study of the Swedish public service television broadcaster - Sveriges Televisions (SVT) transfer pricing model. The aim of the thesis is to examine the motives for using transfer pricing from a theoretical perspective and if SVT?s transfer pricing model fulfils these motives. We will also examine any potential managerial problems the existing transfer-pricing model might cause and discuss how these could be solved. We have in our study found that the main motive for using transfer pricing within SVT is to allocate internal resources as efficiently as possible.

Asset management in insurance companies differs from conventional asset management to the extent that respect has to be taken to both assets and the commitments the insurance company has towards its customers. A model that has proven to fit well regarding the matching of assets and liabilities is the Asset Liability Management Model (ALM model). In addition to the matching in the balance sheet, the ALM model can be used in a company's work with strategic portfolio allocation by applying it as a basis for analyzing investment strategies with expected risk and return. From this, the ALM model also becomes relevant for calculating key figures according to the legal framework Solvens II which includes laws and regulations regarding the demands on economical strength (solvens) of insurance companies.Hence, the goal of this masters thesis has been to, on behalf of Bliwa Livförsäkring, create an ALM model to support the asset management department of Bliwa in their work with defining a credible way of analyzing the future risk and return of Bliwa's asset portfolio and insurance undertakings.The ALM model generally consist of four submodels, the scenario model, the liability model, the asset model and the company model, where the scenario model often is named as the core of the ALM model. The course of action has been to develop these submodels individually, with focus on the scenario model.

An important process for grid companies in order to reduce power losses in electricity distribution grids is to figure out where and how they appear. This report describes the factors that cause power losses in low voltage distribution grids and methods for how they could be measured and analyzed. Measurement data for consumed and injected energy were collected for twelve low voltage distribution grids owned by Gävle Energi AB in order to analyze the size of the power losses and how the measurement uncertainty affects the collected data. Then models of three of the grids were created in MATLAB in order to analyze the data and the power losses were calculated to be compared to the collected data. Curve fitting were also used as a method in order to analyze the power losses from collected data.The results show that the losses in the studied grids are low.

Tången 2 is a building situated in Stockholm, Sweden. It´s built in the 1930s and contains both residences and businesses. The property owner, Diligentia AB, wants to lower the energy use in Tången 2. This report consists of an energy audit which clarifies the specific circumstances linked to Tången 2. Collected knowledge is then used, together with the results from the literature study, to decide energy measures to proceed with.

The government regulations for energy use in buildings will be tightened in the future. At the same time the interest in environmental classifications and certifications of buildings is increasing. This has meant a new situation for solar energy. The designs of solar heating systems are often based on experience and/or rules of thumb, rather than calculations and simulations. This thesis examines whether simulation tools, in this case Polysun, are useful in this work.

The environmental debate is more intensive than ever before and the demands on companies increase. There are a number of methods to make it easier for the companies to fulfil the demands. Life Cycle Assessment (LCA) end ecodesign are some of the methods that can be used. Syntronic AB has the possibility to reduce the products´ environmental impact in the design phase. Therefore it is important for the company to make it possible to visualize the negative environmental impacts a product can cause in an easy way. It is also important to visualize for there clients if any improvement is possible. The purpose of this thesis is to develop a simplified model.

This thesis assignment at C-level is focused on calculation models and prediction methodswhish can be used in the stage we call ?prospecting? of possible windmill locations. Thelocation is southeast of Halmstad at the Farm ?Stjernarpsgods?. The rapport has two mainareas directed towards this task.

This paper aim to present a model for evaluating what we choose to call HTML-frameworks, a framework that contains a set of CSS layouts and occasionally JavaScript support, based on the characteristics of the software quality standard ISO/IEC 9126-1. The methods used to produce this model is based on a field study that involved making a web portal with the help of a HTML-framework, some relevant literature and an analysis of the framework based on the characteristics of the ISO/IEC 9126-1 standard. The result was a model based on twelve different characteristics; functionality, web browser compatibility, collaborative skills, user-friendliness, documentation, visuals, graphic layout, performance, activity, professional support, replaceability and license. This model should be viewed upon as a suggestion to what a model for choosing HTML-framework could look like, because we haven?t had the time to test it in a real situation, so further studies are needed, and we believe there could be improvements made in the objectivity of the assessments of the characteristics..

The purpose of this essay is to examine Banverket?s problems with its current financial model as it relates to reporting on operations and maintenance work, and to propose measures to simplify the model..

This work is a part of the project ?Våtmarker i odlingslandskapet ? uppföljning av miljömålen? (Wetlands in arable land ? following-up of the environmental goals). The main objective with this project is to study nitrogen and phosphorus retention in a constructed wetland by using mass balance calculations. Continuous measurements of nutrients and water flow through the inlet and the outlet of the wetland are made. However, substantial amounts of nitrogen and phosphorus were assumed to reach the wetland with a drain-pipe transporting wastewater from nearby houses (10 persons).

The thesis describes a completely new biofuel system to generate particle-free heat from combustion of ash-containing biofuel particles at high temperatures.The suggested system gives opportunities to introduce biofuels in new areas.Main components in the suggested system is a heat radiating combustion chamber intended for pulverized wood, combined with regenerators to extract heat from flue gases and simultaneously preheating the combustion air.The thesis contains a description of the suggested system, theoretical considerations, calculations regarding the combustion, and includes results from tests performed.The results from calculations and tests performed concludes that the system is workable and possible to apply..

The government regulations for energy use in buildings will be tightened in the future. At the same time the interest in environmental classifications and certifications of buildings is increasing. This has meant a new situation for solar energy. The designs of solar heating systems are often based on experience and/or rules of thumb, rather than calculations and simulations. This thesis examines whether simulation tools, in this case Polysun, are useful in this work.