The thesis that follows is performed in collaboration with Nitator in Oskarström.The factory in Oskarström focuses on laser cutting, robotic welding and surfacetreatment of steel for the automotive industry.The project aims to streamline the flow of materials in production by automatingthe movements of the forklifts, running to and from the interlayer, and betweenworkstations.The project started with a systematic literature search. The literature searchshowed the research position around the AGV-system. Also a review of studentliterature was made, so that a suitable method for practical implementation couldbe developed and applied. Selected method uses both quantitative and qualitativeapproaches, which is analyzed by using triangulation.The work has resulted in a modified layout of the current facility in Oskarströmthat can be used for the implementation of the AGV-system. It has also resulted inthe tender documents and profitability Calculation from several of AGV-suppliers..

This thesis paper discusses the results of a survey which was conducted to investigate the potential usefulness of mobile apps in the maintenance department at Perstorp Specialty Chemicals AB. The paper contains four sections, a theory section, a method section , a section that explains the functionality of the app, and finally a results section where the results and conclusions of the survey are discussed. The theory section explains and discusses relevant terminology used in the computer science field and in the maintenance industry. The theoretical model used in this paper is also discussed. The methods section gives a stepwise description of the project and a description of platform and software used.

This thesis paper discusses the results of a survey which was conducted to investigate the potential usefulness of mobile apps in the maintenance department at Perstorp Specialty Chemicals AB. The paper contains four sections, a theory section, a method section , a section that explains the functionality of the app, and finally a results section where the results and conclusions of the survey are discussed. The theory section explains and discusses relevant terminology used in the computer science field and in the maintenance industry. The theoretical model used in this paper is also discussed. The methods section gives a stepwise description of the project and a description of platform and software used.

The producers of grain in Sweden are facing a rough future. The competition is getting harder all the time, in Sweden, in EU and also from the ?world market?. The producers have to be more efficient and have to have bigger units. Many producers might have to look for new alternative production opportunities.

In this degree project we wanted to investigate if there are any possibilities to get a higher income from grain growing by giving the grain to hens instead of selling it. We were also wondering if the manure has any value or if it only cost the egg producer money. If the egg producer cultivate his own grain and is able to store it in layer is there quite much money to earn. Expensive pasture makes it profitability to pay up to 1,35 Swedish crowns for a kilo of wheat. In our calculating we?ve used Calculation from the company Lantmännen.

This final thesis is performed on commission of Hargs Bruk Ltd. Hargs Bruk manages one of Sweden?s largest privately owned forests. A main part of the managed forest is situated in Roslagen in eastern Uppland. Since 1934 felling Calculations have been performed within the estate every tenth year.

According to the Board of Forestry, in Västerbotten, many natural regenerations of Scots pine (Pinus sylvestris) carried out on privately owned forest in the middle of 1990 in Västerbotten have rendered a bad regeneration outcome and will provide a low future forest production. The Board of Forestry believes that the negative result can be explained by the fact that the regeneration has been carried out in wrong locations and that scarification failed to work as planned. In order for an accepted rate of regeneration the guidelines of the Forrest Act require, not less than 10 years after final cutting at natural regeneration, that there should be at least 1300 (site indices 16 m) - 1700 (site indices 20 m) main crop stems per hectare. Main crop stems are defined as stems according to the place of growth and appropriate tree type, in addition with regard to quality, stage of development and damage risk have a prospect of succeeding. In addition main crop stems should be separated by surface so that the proportion sample plots with 3 meters radius, and lack main crop stems, are not more than 10 % of site indices 14 meters or higher.

New technology makes it possible to remotely measure all consumers in a power network onan hourly basis and store the values in a database.This thesis work describes the conversion process between automatic meter reading systemMActor and Calculation software Xpower.Then the possible differences between Calculations of power networks using load curves incombination with a yearly estimate of consumption and Calculations using hourly measuredvalues is examined.The result of the comparison shows that, for the power network under inspection, nosignificant difference could be noticed. This does not mean that Calculations using hourlymeasured values would be unnecessary. I believe that in a near future Calculations using hourmeasurements will be the primary choice for many power companies to whom technology isavailable.Also some basic Calculations of fundamental power network parameters, such as power factorand loses, are presented using hourly measured distribution transformers in combinations withits hourly measured loads.The report is written in Swedish.

The Swedish government have a goal that wind turbines shall produce 30 TWh by the year 2020, compared to about 3,5 TWh produced in Sweden during 2010. To minimize the disturbance that wind turbines create the Swedish Environmental Protection Agency has stated a guideline value that noise from wind turbines at nearby residents shouldn?t exceed 40 dBA, at 8 m/s wind speed. With advanced Calculation models, like Nord 2000, the emitted sound from future wind turbines can be calculated at an early stage to optimize the power production without exceeding the 40 dBA. When the turbines have been built there is a need to verify that they really are within the guideline.

In the past, the meaning of marriage has been an agreement between two people to live together and have children in a legitimate manner. The marriage was not just to form a couple; it was also to merge two families together. From the early 1900s until today the allegation of marriage and its influence got a significant change compared to early societies which have aroused my interest to perform this into a research paper. My study is focused on marriage and social changes during the 1900s. Thoughts that arise now is that why there was a remarkable change in the marriage rate during the 1900s and whether there were any social changes had to do something with it.

There exist several known methods for Calculation of radio coverage for ground-based systems. As far as we know there are no equivalent methods for the case of flying platforms when the altitudes and speeds are significantly different to those of ground-based systems. This thesis describes the theoretical concepts behind Calculations of radio coverage for flying platforms. An investigation is made to sort out what is important and possible to employ in a model for simulations. A method is described and implemented in a program for evaluation of flying radio systems.

Energy is today a very common topic, not only in Sweden but in the whole Europe. In EU they have given out a directive 2002/91/EG about buildings energy use and throw this they have forced their members to show how much energy their buildings use. In Sweden has the gouvernment established a law (SFS 2006:985) about energy declaration for buildings which demands that the building owner needs to show how much their buildings energy consumption are. Important to know is that this law doesn´t applies for industrial buildings.The report will show what the new law about energy declaration for buildings and appurtenant directions will mean for Riksbyggen. Also energy Calculations will be done to be able to compare Riksbyggen buildings with the new law and directions.

This study evaluates the retention of nitrogen and phosphorus in four newly constructed wetlands in the municipality of Falkenberg, Sweden. The four wetlands have been selected because they have been specifically constructed with the aim to reduce nitrogen and phosphorus in farming areas. The process of selecting the specific wetlands has been done in collaboration with the county administration in Halland. Through field studies in collaboration with the landowners where the wetlands are sited, the areas that provide the wetlands with water were determined. The size of these drainage areas were determined in a GIS computer program. The type of land use within the drainage areas was also determined.

When forces in foundation piles are calculated according to classic theory, thefoundation are assumed to be infinitely rigid which means that the foundation will notbend. High buildings need their whole width to be stable and use the ground floorwall as a foundation. But when, for example windows are needed in the ground floorwall, the stiffness of the foundation decreases which change the forces in the piles. Inthis report the difference of pile forces versus classic theory has been analyzed, and ifpile forces can be calculated as in classic theory. Further on, the effects of the wallmovement were analysed and how the buildings crack safety would be affected by themovement at the ground floor.

Detta examensarbete har genomförts på begäran av byggnadstekniska byrån i Uppsala. Företaget behöver en ny beräkningsmall med vindlastberäkning för väggar och olika taktyper enligt Eurokod.I dagsläget använder företaget en beräkningsmall som är baserad på gamla normer enligt BKR. Dessa normer kan dock inte användas längre enligt nya bestämmelser inom branschen. Enligt de nya bestämmelserna bör dessa vindlastberäkningar genomföras med hänsyn till Eurokod i framtiden.För att kunna beräkna vindlasten enligt Eurokod och effektivisera beräkningsgången har man utvecklat en beräkningsmall baserad på Eurokod. Alla nödvändiga parameterar enligt standarder har använts i beräkningsmallen och användaren tillåts genomföra en snabb och enkel inmatning av projektmått för att på ett automatiserat sätt genomföra belastningsanalysen.