Background: Insufficient nutritional support is associated with prolonged hospitalisation, impaired wound healing and impaired survival for patients in intensive care. In severe sepsis and septic chock, calculation of nutritional need is complicated since the metabolism is affected by decease. Aim: The aim of the study was to investigate nutritional support and to examine the quality of nursing documentation of nutritional status and nutritional support in patient records in severe sepsis and septic chock.  Method: The study was conducted as a retrospective investigation where 64 patient records were studied. The quality of documentation was examined in 10 patient records using an examinational model.Findings: Calculation of average nutritional support showed insufficient supply particularly in the two first days of intensive care. During the next five days nutritional supply was higher but individual variation was seen, why a clear picture of nutritional support is hard to detect.

The  construction  industry  is  a  costly  business  such  in  respect  of  capital  for  most construction defects which then require rework, tear down and rebuild again. This study is  meaningful  awareness  of  tools  that  can  reduce  this  best  through  communication  and information sharing between the parties.  The  construction  industry  is  known  as  temporary  projects  organizations,  where  the construction  project  consists  of  several  actors  who  have  to  communicate  and  share information  between  them  to  avoid  mistakes  later  in  the  build  time.  These  actors  are bounded together thus for the duration of the project, then broken when the project has reached its end. The challenge here is for these actors to apply a tool that can help and simplify communications, information sharing, and perhaps the most important aspect is to  create  a  routine  for  the  association  and  the  shattering  of  these  actors.  To  implement such  behavior  using  a  tool  such  as  BIM  in  the  industry  whose  size  perhaps  is indescribable may be a very hard task.  BIM (Building Information Model) could be seen as the solution to this problem because it  acts  as  a  portal  where  the  actors  involved  must  sign  in  and  communicate,  share information, and eventually create a behavior, a routine for this association and division of  the  actors  following  the  end  of  the  project.  The  technology  could  help  the  involved from  the  beginning  of  the  project,  already  in  the  model  stage,  break  down  and  prevent any construction barriers when the building has been placed in the works.

AbstractHudiksvalls coordinating model - a model to make cooperation easierCamilla Andersson and Åsa GradinThe purpose of this study was to examine the experience each one of the administrators have of their own new model in Hudiksvall to make cooperation easier for the three different administrations in Hudiksvalls municipality. The study will focus on the administrators experiences of Hudiksvalls coordinating design. Questions of the study were: How is the influence of the model on the rules? How is the influence of the model on expectations and parts? What kind of influence did the model have on the responsibility distribution? What kind of influence has the model on the responsibilities at the transfer of costs? To answer the questions of the study we applied a qualitative method, it was made through a standardization interview guide and open questions, with six of the dealing officers who works with the model. Some of the results wich can be discern are by an economic character, andfor the clients that they won`t be passed around the administrations in the community, they get the right help, quick and safe.Key words: cooperation, coordination..

This report present a working model for simulation of what happens to colors displayed on screens when they are observed through optical filters. The results of the model can be used to visually, on one screen, simulate another screen with an applied optical filter. The model can also produce CIE color difference values for the simulated screen colors. The model is data driven and requires spectral measurements for at least the screen to be simulated and the physical filters that will be used. The model is divided into three separate modules or steps where each of the modules can be easily replaced by alternative implementations or solutions.

Abstract Title: The Future of ABC at Sandvik Tooling ? Incorporating ABC with information systems in order to drive business development from a cost point of view. Authors: Jenny Andersson and Camilla Salomonsson. Supervisor: Charlotta Johnsson ? Department of Automatic Control, Lund University.

This master thesis was conducted during the spring of 2014 at Atlas Copco Rock Drills AB in Örebro. The purpose of the thesis was to develop a simulation model of the rotation system for a hydraulic rock drill. In the future, the model will be used to investigate the phenomena called ?jerky rotation?. In order to validate the simulation model a test bench was designed and tests were made.

Calculated and measured energy in residential buildings is going to differ. The reason to this may be due to many factors. In this study there is a study on how these factors affect the energy use in a building. To get an insight in what defines energy, there is first a description of energy supply both worldwide and used in Sweden, followed by a description of the energy balance. In this study energy will be studied in residential buildings only.

This report presents an investment calculation based on an assumed initial investment of a new saw line to an existing sawmill. In order to get as close to reality as possible, we have received data material from northern forest owners who recently made an initial investment in their sawmill in Kåge. In order to calculate and evaluate investments are several different methods, but we, we have chosen to use the discounted cash flow method. The method sums up with the help of a fixed cost of capital together with any future costs and revenues, thereby giving a present value of the investment. We also do a sensitivity analysis to examine how selected factors affect the investment research they change. The study is carried out to a fictitious investment, and therefore the result should not only be studied as a result of the figures. The purpose of this study was that with the help of an investment calculation studying the profitability of a hypothetical investment, and by means of a sensitivity analysis to study the sensitivity of investment to changes. The result demonstrates that the calculations according to the present value method requires a lot of information of the prospective investment.

A multivariate cross-sectional model is used in this thesis to proxy for expected earnings and to estimate return on equity for 214 companies over the period 2009-2013, using Swedish data. The model, which has never been tested on Swedish data before, is first confirmed to function as a forecasting model for expected return. Furthermore, the model is evaluated through a comparison with two univariate models based on the assumption that return on equity follows a mean reversion process. Forecast accuracy is calculated as the difference of estimated returns and actual returns. The results show that the univariate models' forecasts are superior to the multivariate model's..

The purpose of this study was to develop two types of prediction models for Scots Pine and Norway Spruce. The first type for calculation of the stump diameter under bark the year the tree reached breast height (Dstubh130). The second type for calculation of the annual difference, e.g. the number of growth years between stump height (0.2 m) and breast height (1.3 meters above ground level). The primary thought with these prediction models is to obtain the breast height age in the trees on basis of the number of annual rings at stump.

This paper describes the development of a simulation model for the ambulance flow in the Västra Götalands-region of Sweden, and an analysis tool for the output of the simulation model. The aim of the simulation model was to be able to evaluate the outcome from changes in the ambulance operations, such as a reorganization of ambulances or an increase in intensity of the ambulance calls. This evaluation is meant to serve as decision support for the strategic planning of the ambulance operations. The analysis tool was developed to visualize the abundant geographical data produced by the simulation model in a meaningful way. The simulation model was validated against historical data which showed that the dispatch time for the highest prioritized ambulance calls corresponds well with historical data.

Problems: How does Volvos CE: s four Swedish plants work with investment appraisals? Does the work differ between the plants? If differences exist, what can be improved in order to make the work more uniform?  Purpose: To map the work with investment appraisals at Volvo CE: s four Swedish plats, to analyze differences in work between the plants and give proposals to a more homogenous working.Method: A method of qualitative nature. The study mainly contains raw data from semi structured interviews. Secondary data, such as internal policy documents and documentation of completed investment projects, has supplemented the raw data. Analysis: The mapping shows significant differences in work with investments between Volvo CE: s Swedish plants.

The reindeer planning system (Renbruksplanen, RBP) is a communication and planning tool designed for Sami groups. A key purpose of this is that it will act as a tool in consultation with other market players, including forestry. Sami groups have asked for a model of how this can be used in a flexible manner. With the Swedish Forest Agency as a project manager, a communication model for how to use the RBP has been designed. It consists of a number of points divided into ?before?, ?during? and ?after? the consultation.

In this report the balconies? abutments for a property in Bo01-area in Malmö has been studied. The property which is called Vitruvius contains four build-ings where two of them have corbelling balconies with intermittent abutments. With intermittent abutment means that the 50 mm thermal bridge insulation that the balconies is equipped with, is broken regularly by a 300 mm concrete heel. The reinforcement bar that holds the balcony runs through this heel.

The purpose of this thesis is to examinethe possibilities for adding a floor to anexisting building using the two materialswood and sheet metal profiles as the loadbearing structure. An apartment buildingfrom the 60s has been used as referencehouse. Two different suggestions for thedesign are presented in the rapport. Oneof them has been analyzed with wood andsheet metal as the load bearing structure.Using the old constructional calculationsand blueprints of the existing buildings,the load bearing capacity has beencalculated. In the calculation programFEM-Design the building has been testedwith the loads that an extra floor wouldgive.