Sweden will, in accordance with the EU-directive 2003/54/EC, move from post-regulating the electricity power grid-tariffs by using a fictitious grid, to a regulation in advance which uses the actual power grid as a starting point. For this purpose a component breakdown of the grid needs to be made to determine the value of the network and by that the tariff price that is reasonable for the network business in question to charge.The primary breakdown criteria is the voltage-level and type of region. Voltage-level is crucial for the cost and complexity of a grid-part, because the higher the voltagelevel is, there are more and stricter laws and rules to follow. This work is limited to the distributionpart of the grid, in other words voltage levels from 20 kV and below.The type of region is crucial to the type of components you can and want to use. In city environments both overhead-wires and independent substations are undesirable for both practical, safety and aesthetic reasons.

The study of medicinal plants is a popular subject that, at least in the archaeological sciences, has met a lot of criticism due to the lack of physical data. It is problematic to distinguish the medicinal plants from local flora since many herbs that were used often could be found in the nearby vegetation.  The purpose of this essay is to archaebotanically analyze samples from the medieval town Nya Lödöse and compare the data with a previous analysis from the site and a literature study. The herbs meadowsweet (Filipendula ulmaria), lady?s mantle (Alchemilla sp.), sweet gale (Myrica gale), hop (Humulus lupulus), common tormentil (Potentilla erecta), St. John?s wort (Hypericum perforatum), henbane (Hyoscyamus niger), catnip (Nepeta cataria) and motherwort (Leonurus cardiaca) have been selected for closer analysis since they occur with frequency in the historical medicinal texts and in previous analysis made on the site.

In the media world today it is important for TV-companies to differentiate since the number  of competitors has increased. The competition is more complex today because of the  possibility to broadcast throughout satellite and cable. As a company you need a strong brand  in order to differentiate the company from the competitors. The brand of media companies are  set by the content of the offer, which means that the program and the people connected to the  television program has an importance for the sake of how people experience the company. For  a commercial TV channel the content is also important because it attracts the viewers and as a  consequence, also attracts the advertisers.

In Sweden today so-called "prescribed nature conservation burning" is performed due to the change in silvicultural law, certification and an increased knowledge regarding the field of fire in the forest landscape. The aim is to re-create structures and qualities made by the fire regimes of the past, though on a much smaller geographical scale. The structures and qualities to be re-created are for example broad leaf stands, trees with large diameter, heterogeneous stands regarding variables such as age and diameter. If we increase our knowledge of the constitution of forests characterized by fire, then we will be able to set goals for what achievements to reach both on landscape scale and stand scale. The aim of this paper is to try to describe how a stand from the past was composed regarding mainly the spatial arrangement and compare it with the stand of today in the same place. This to be done by using relict material, that is stumps and dead standing trees.

The  construction  industry  is  a  costly  business  such  in  respect  of  capital  for  most construction defects which then require rework, tear down and rebuild again. This study is  meaningful  awareness  of  tools  that  can  reduce  this  best  through  communication  and information sharing between the parties.  The  construction  industry  is  known  as  temporary  projects  organizations,  where  the construction  project  consists  of  several  actors  who  have  to  communicate  and  share information  between  them  to  avoid  mistakes  later  in  the  build  time.  These  actors  are bounded together thus for the duration of the project, then broken when the project has reached its end. The challenge here is for these actors to apply a tool that can help and simplify communications, information sharing, and perhaps the most important aspect is to  create  a  routine  for  the  association  and  the  shattering  of  these  actors.  To  implement such  behavior  using  a  tool  such  as  BIM  in  the  industry  whose  size  perhaps  is indescribable may be a very hard task.  BIM (Building Information Model) could be seen as the solution to this problem because it  acts  as  a  portal  where  the  actors  involved  must  sign  in  and  communicate,  share information, and eventually create a behavior, a routine for this association and division of  the  actors  following  the  end  of  the  project.  The  technology  could  help  the  involved from  the  beginning  of  the  project,  already  in  the  model  stage,  break  down  and  prevent any construction barriers when the building has been placed in the works.

AbstractLean production has become one common concept within industries to make the work more effective and to meet today?s hard competition. A challenge for Chinese production is the threat from new low cost countries. It will become very difficult to succeed to produce to a lower cost than these countries; this led to that Chinese companies must develop new strategies, according to Lee and Zhou (2000). This will put China in front of new challenges and new strategies can be needed to retain their strong competitive advantages.

The aim with this study has been to examine and to analyze the discourse of Rosengård in Swedish media. With the concept of discourse is meant here specific ways to speak about and to understand the world, or a part of it. In order to reach increased understanding regarding media presentations and constructions of Rosengård, I have done a study about how Rosengård has been presented in the Swedish daily and evening press during the violent acts that took place in Rosengård in the spring and summer of 2008, when youths regarding to media put cars and containers on fire, and also threw stones at fire engines and other emergency service vehicles when these had to turn out to put out the fires. The collected data, containing newspaper articles, has been analyzed on the basis of the critical discourse analysis, CDA, which is a mould of a textanalytical method. This study applies a social constructivist perspective.

Chinas government has a multifunctional program for a more sustainable forestry since 2000. This six key forest programs goal is to develop a more sustainable forest sector but also take environment consideration. The state forest administration in China has decided to create 5.8 million hectare of fast growing and high yield forest. Eucalyptus has showed to have good properties for pulp and timber production and therefore Eucalyptus plantations are under development in costal areas in southern China. By adding extra nutrients, growth can be enhanced in Eucalyptus plantations.

At the Department of Technology and Built environment at the University of Gävle there was an interest to study GNU Radio, which is an "open source radio project. The project is based on that most of the radio signal processing is made in an ordinary PC. The idea behind this degree project was that in a laptop there are several radio transmitters/receivers that takes space, generates heat and transmit in varied frequency band etcetera. All these radio transmitters/receivers could be replaced with a Software Defined Radio system. It means that one common, general radio hardware is used to different communications such as: WLAN, Bluetooth, GPRS, 3G etcetera. The waveform is generated in the software, which makes the system very flexible.

This study was conducted in the "Kåtaberget" forest reserve in Västerbotten in the summer of 1999. In the summer of 1995, a prescribed burning was performed in the reserve. In some places where coarse dry woody debris (logs and stumps) was present, the fire consumed the wood, as well as parts of the humus layer, creating deep-burned patches. The low intensity ground fire also created dead woody debris by burning off living trees with open fire scars, as well as standing dead trees. In this study, the post-fire tree seedling establishment was examined, with special attention given to the former presence of woody debris. The study also includes a survey of the areal extent of deep-burned patches, as well as an examination of tree seedling establishment in these patches, compared to other burnt ground.

As a part of Göteborg Energi?s work towards a smarter electric grid, the company has chosen to investigate the possibilities of automation in their middle voltage grid. In Europe, there are example cases where these technologies already are installed which many articles on the CIRED conference 2011 proved. Netcontrol Oy in Finland has, together with Tekla, created an automated SCADA system that Vattenfall in Finland today uses. The grid mainly consists of 10 kV open loop fed city grid and this automation is mainly designed for this type of grid.

During the period 2009-2013, investments in the Swedish national grid increase by a factor of ten compared to previous years. In order to fulfil their mission to manage the national grid in a safe, efficient and environmentally sound way, Svenska Kraftnät (Swedish National Grid) needs to take all these perspectives into account while planning new investments. To compare and relate perspectives of technology, economy and environment the same yard stick must be used. That yard stick is commonly money. A problem arises however as environmental issues are difficult to price.The purpose of this master?s degree project was to develop a tool for evaluation of environmental impact related to investments in the Swedish national grid.

Historically transformers with system earth equipment have been modeled as open circuits in zero sequence. This approximation has been satisfying, but lately it has been discovered that equipment on one side of the transformer have responded to faults that occurred at the other side. Most of these problems took place when the majority of the system on the secondary side of the transformer contained cables. These findings have led to questioning whether or not the former model of the transformer in zero sequence is correct. This report investigates if it is necessary to represent the transformer in zero sequence in another way than it is usually done today.

The thesis first objective was to develop field instructions for forest planning of native forests in Andean Patagonia, and the second objective was to test the plan on an actual property in the area. The thesis was limited to studies in the province of Rio Negro. Today, there are no official forest management plans for native forests in the Argentinean province of Rio Negro; thus, there is an obvious need for an official forest management plan with clear guidelines. To be granted permission to manage, i.e. through thinning, the native forests on a property it is required to have a forest management plan that is approved by the Forestry Board in the province in question (Thill, B.

Companies constantly strive for the perfect order which enables them to satisfy and retain their customers. This is a difficult process that can be facilitated by using different picking technologies. In this study, a research of the picking technologies Pick-to-Light and Pick-to-Voice have been made to investigate when each technology is suited.In order to collect relevant information and data to be able to answer the question formulation, a qualitative study with interviews have been made. The purpose of this essay was to investigate Pick-to-Light and Pick-to-Voice to see when each technology is best suited and to see what the differences between the technologies are. With our essay we wanted to help manufacturing companies to make the right decisions when implementing a picking technology.The results showed that those picking technologies give companies a higher picking quality and an increased work efficiency since the order picking is faster to perform, and that picking errors are reduced.