The goal of this work is to summarize the calculations for scaling and noise of twoportadaptor. Two different methods has been described and used for the final results..

Active headsets have been on the market for years and now it is time for something else to enter the stage. The technology of active noise reduction can for exmple also be used in ventilation systems for reducing ventilation noise. An active control system principally consists of four important components, namely the downstream error microphone, the upstream detection or reference microphone, the digital signal processor (DSP) and a loudspeaker. The upstream reference microphone listen to the primary ventilation noise and sends it to the DSP which makes a phase shift to the signal and sends it to the loudspeaker. The loudspeaker sends out the opposite waveform of the incoming one and reduce the primary ventilation noise.

Active headsets have been on the market for years and now it is time for something else to enter the stage. The technology of active noise reduction can for exmple also be used in ventilation systems for reducing ventilation noise. An active control system principally consists of four important components, namely the downstream error microphone, the upstream detection or reference microphone, the digital signal processor (DSP) and a loudspeaker. The upstream reference microphone listen to the primary ventilation noise and sends it to the DSP which makes a phase shift to the signal and sends it to the loudspeaker. The loudspeaker sends out the opposite waveform of the incoming one and reduce the primary ventilation noise.

Good comfort for the driver of a construction machine is crucial. Gearshift comfort is an important part of the total comfort. Volvo Construction Equipment Components has a simulation environment of the powertrain, SimPow, which is implemented in Matlab/Simulink. SimPow is mostly used for simulation of control strategies and performance. In order to be able to study gearshifting comfort, Volvo has an interest in developing new models for SimPow.

The report examines the factors which may be a contributing cause to the problems that are present when ferritic stainless steel are eddy current tested in a warm condition. The work is carried out at Fagersta Stainless AB in Fagersta which manufactures stainless steel wire. In the rolling mill there is an eddy current equipment for detection of surface defects on the wire. The ferritic stainless steels cause a noise when testing and this noise complicates the detection of defects.Because of this, a study was made of how the noise related to factors such as steel grade, temperature, size and velocity. By observing the signal and with the possibilities to change the equipment settings the capability to let a signal filter reduce the noise level were evaluated.

Wind power in Sweden is expanding in response to the government's decision that 49% of Sweden's power should originate from renewable energy sources by the year 2020. Problems with noise and sound emissions related to wind turbines are a constant argument against the wind power expansion and this paper means to examine if vertical axis wind turbines might be a viable alternative to the conventional horizontal design for noise sensitive areas. In order to determine factors like difference in frequency, noise propagation and noise emission level, measurements of both horizontal and vertical axis wind turbines have been completed and the data analyzed with MATLAB. It is shown that there is a difference in how the noise from the two types of turbines propagates due to avariation in the frequency spectra of the emitted sound. It is also shown that vertical axis wind turbines generate a lower sound emission with less intensity inthe lower frequencies..

Noise is a growing health problem. People are not always aware of the injuries that noise can cause. The media culture of today has a big influence on teenagers. This is caused by portable music players, computers, concerts etc. The schools are having larg classes and that can cause a lot irrelevant speech during lessons.

Noise in schools can have negative effect on the teaching environment and speech perception. The national Child Environmental Health Surveys (BMHE) conducted in 2003 and 2011 studied how 12-year olds experience their sound environment in school. Results showed that the number of pupils that experience annoyance from noise increased from 2003 to 2011.Aim: The aim of this study was to study how 12-year olds perceive their sound environment in school.Methodology and material: A quantitative questionnaire survey was conducted in the sixth grade at two schools. The questionnaire used included questions from BMHE and self-produced questions. Sixtynine students answered the questionnaire.Results: Over 50 % of the respondents experience annoyance from noise in school several times a week.

Landscape architecture is a visual profession, but other senses also affect our interpretation of a place. Sounds can give us a lot of information about an environment, and they are often perceived as positive. Despite this, research about outdoor sounds most often focus on the reduction of unwanted sounds ? noise ? but the absence of noise does not result in a good soundscape. To accomplish this, sounds we appreciate are needed.

In this Master's thesis, a direct-conversion receiver front-end has been designed in a 0.18um CMOS technology. Direct-conversion receivers (DCR) have obvious advantages over the heterodyne counterpart. Since the intermediate frequency (IF) is zero, the problem of image is circumvented. As a result, no front-end image reject filter is required and the channel selection requires only a low-pass filter, which makes it easy to integrate directly on chip. However, the DCR also suffers from several drawbacks such as extreme sensitivity to DC offsets, 1/f noise, local oscillator (LO) leakage/radiation, front-end nonlinearity and I/Q mismatch.

Background: Phonemically balanced word lists are used when obtaining speech recognition scores in noise. These lists are designed for adults, but are still used for children. To properly obtain speech recognition scores in noise for children, normative data is needed to show what differences there are to be expected between children of different ages. Purpose: The main purpose is to obtain normative data for children in the ages of 7, 10 and 13 years for speech recognition scores in noise using words and to compare these with each other and with normative data of adults. A further purpose is to examine if there is any practice- or exhaustion effect to be seen when obtaining speech recognition scores in noise for children in the ages of 7, 10 and 13 years.Material: The participants were ten 7-year-olds, ten 10-year-olds and ten 13-year-olds.

Since the spring 2003 the tenant-owner home association the Terrace in Upplands Väsby municipality lies straight under the approach route to Arlanda Airport?s new third landing chute. Noise levels of over 70 dB have been measured in the area, which exceeds National Board of Housing?s, values for traffic noise at a terrace in connection to housing. By using the method of hedonisk pricing the essay tries to find out if there exists a willingness to pay to reduce the noise in the area.

Constantly growing demands from the costumers in the Automotive industry forces the subcontractors to seek alternative ways to compete. One parameter of quality is the components tolerance against NVH(Noise, Vibraion & Harshness) aspects. Kongsbergs Automotive has developed a new gear shifter platform (Shift-by-Wire) that is sold to Alfa Romeo and used in of their car models. However, the company is not pleased with the components sound quality, therefore the main purpose of this thesis is to develope a number of concepts that is supposed to enhance these NVH-aspects.To get an understanding of the problem an analysis of the causes of the emitted sound has been done parallell to a product decomposition, function decomposition and a Ishikawa-diagram. Together with these methods has a litterature study been performed to get familiar with the physics of an impact and especially the emittment of noise.

Volvo Construction Equipment is a world leading company in construction machinery. Tomaintain the best products, development is prioritized. The master thesis regards sound reductionof the hydraulic system on a wheel loader. The background to the master thesis is asimulation made on the hydraulic system, performed autumn 2005. The result of the simulationshows that the energy of the pressure ripple is reduced when the paralleled hydraulicpumps are phase shifted and reduces each others pump pulsations.

There is always a need for more effective ways to store energy in order to reduce the human impact on the environment. One step on the way can be the use of flywheels as kinetic energy storage devices. Low frictional losses are essential for a flywheel to be effective. To minimize these losses active magnetic bearings (AMB) can be used to keep the shaft centered instead of the more conventional ball-bearings. AMBs use actuators and a fast control system that needs correct and noise-free measurement data of the shaft position and the current in the actuators to work properly.This thesis explains the process of constructing power electronics and a current measurement system for active magnetic bearings (AMB).