This report describes an investigation of the indoor climate in two different workspaces. Since we a big part of our lives are staying indoors in artificial environments, and more particularly in our workplaces, we think it would be interesting to do this investigation. The technical solutions for air treatment systems began with simple natural systems without fans and where the thermal rise of the air applied. In modern time is technical air treating systems used to take care of the fresh air supply. This type of units can supply filtered air with the right temperature to the building. Well-functioning ventilation is essential to bring clean fresh air to the room and effectively remove impurities without sound- or draught problems. The indoor climate is relevant for the output capacity.

This paper describes a method for wireless energy transfer via near-field electromagnetic inductionthat is inexpensive, simple and can be applied to almost any type of system, regardless of size andenergy demands.The method uses a primary unit consisting of an oscillator, amplifier and inductive coil thattransfers energy to a secondary unit consisting of a coil, rectifier and voltage regulator. Two typesof oscillators and several amplifier designs were realized and evaluated together with a multitudeof flat coils of both monofilar and bifilar type.The results show that it is important to use an oscillator whose frequency is dependent on theinductance of the connected transmission coil, such as the Colpitts oscillator. This is preferable toan oscillator with a preset frequency, such as a Schmitt-trigger oscillator..

The report begins with a general inventory of possible technical faults in a hydropower plant and of possible fault indicating measurements. Then an investigation is made concerning a few different faults. Based on this investigation a choice on seal box condition and water leakage is made as problem for a more thorough examination, in which it is concluded that the turbine water leakage is larger when the turbine is put into operation. The examination ultimately results in a computer alarm for faults related to the seal box. Finally a few things are mentioned about flow measurement and pressure measurement in relation to the project as a whole..

The environmental demands are increasing when it comes to product development. EcoDesign isabout minimizing the environmental impact of a product, considering the entire life cycle of it,without compromising other qualities like function or cost. In this master of science thesis amobile phone has been analysed with Ten Golden Rules in EcoDesign regarding production, useand End of Life. Also a functional and an environmental profile were made. The goal was tomake a new concept phone, based on the previous analysis, which communicates userfriendlinessand sustainable development.

All over the world the waste from human society is causing problems. In developing countries, large cities are polluted through huge amounts of wastes and people are forced to live very close to open deposits. Lima, capital of Peru, is no exception. The countryside in Peru has also a great challenge to face concerning the waste issue. Children and adults suffer from infectious diseases and contamination of the nature occurs as well. One solution to handle organic waste is to compost, which means a controlled decomposition of organic waste under aerobic conditions at certain temperatures.

The world today is experiencing an AI summer, urging us to engage with its technologies on a daily basis. Recently, researchers have begun to voice concerns about the potential risks if we do not address the inherent biases in these systems. After all, AI is merely code based on mathematics produced by humans. This essay focuses on Stable Diffusion and Midjourney to examine biases in fashion representation and how fashion is visualized and reproduced concerning race, social class, and culture. A series of prompts were intentionally written in simple terms such as ?rich,? ?poor,? and ?race.? The results revealed troubling biases, as these programs consistently depicted poor individuals as people of color and portrayed wealthy, elegantly dressed individuals as exclusively white..

Consumers today leave a fragment of information when they pay with their debit and credit cards. The aim of our work is to investigate ways to design a concept of a system in which digitally stored information that today is fragmented among several different holders, can be assembled into a system and made available to consumers. In our study of how a system for financial flow of information should be designed, we intend to study the present situation and the attempts made to alter it into a more informative reality. We intend to investigate the flow of information when a consumer pays by card, and the possible solutions regarding the design and transportation of digital receipts. A majority of the information of our digital consumption is today handled digitally.

Our aim in this work has been to redesign ModernFamilies and make a user-friendly interface for people with aphasia. The focus has been to identify general issues they might face while using different technology and applications, in order to find better alternative design for ModernFamilies, with a focus on usability. To approach this issue, we used a qualitative method. Our study includes several interviews and observations preformed in conjunction with the AGNES project (AGeing in a NEtworked Society) and speech therapists. Aphasia requires simple design that in the same time gives them support to understand and use technology and different applications.

This thesis discusses the 2007 elections in Kenya, and its aftermath. The aim is to examine whether or not ethnicity played a major role in the outbreak of violence that followed the referendum. As well as different theories and discussions on ethnicity, I will also try to explain the course of events by using theories of increased civil violence during a democratic transition, and the fact that weak political institutions can cause violence. My conclusion is that ethnicity has played a part in the violence, but is too simple to blame the events following the election on just that. A number of different factors all contributed to the outbreak, but all to a different extent.

High-precision cutting in metal is very complicated, a lot of parameters affect the result: what geometries to be manufactured, surface roughness and tolerances to be achieved, batch size etcetera. When pull-broaching internal parts this might be even more important, than in any other cutting operation. Everything is machined in one single stroke and the general technology is built in to the tool, therefore big investments must be made to change the process. Milling for an example: one piece at a time is machined away, and a lot of parameters can be changed easily.It is very high pressure on the cutting-edge when the broach is cutting. To achieve the specified product and to avoid unnecessary toolwear it is essential to use the right cuttingfluid and the right cuttingspeed for an example.

In today?s society computers are getting a much more important role. To get a computer to work as intended it has to be programmed. A computer program is written with programming languages. There is an abundance of programming languages available today and there are many differences and similarities between them.

This study focuses on why people not longer want to be a part of a religious communion they have earlier been a part of. To examine this I have made seven interviews with people who have left their previous communions. Together with the methodological and theoretical discussions on discourse analysis, Richard Jenkins discussions on identity and theories concerning the post-modern society, I have made an analysis on how these people consider their previous communions and its members. They refer i.e. to the social control, the ?closed? culture and the non-questioning-culture that constitute the communions and its techniques.

This is a work that look at the factors that affect future monthly costs when buying a house in Sweden and which options are the most financially favorable over a 30 year period. The work also examines whether it is economically beneficial to invest in a low-energy house regardless of geographic location in Sweden, and discuss about whether a calculation template can help individuals to choose more environmentally friendly options. The work has been limited so that a certain number of predetermined factors and its measurable values have been developed with the help of a literature study. The factors chosen are building type, climate, heating systems, loan interest rates, energy prices, energy price increases, inflation rates and down payment. These are then combined into 72 different calculation cases which get put in a calculation model made in excel.

This thesis investigates how inventory management is practiced at a Swedish sawmill company, how practice differs from theory in this field and how the company could make more use of this theory. To do this we have performed a study on relevant literature and compared our findings with a field study on Moelven Valåsen AB. Our analysis shows that a large gap between theory and practice exists. We identify several reasons to this, including some sector specific problems when calculating cost rate for timber inventories. Suggestions on solutions to these problems and an example of how a cost rate can be estimated with relatively simple means are presented.

This work addresses how the book boxes that are shipped to different schools, that don?t havelibraries themselves, from the city library are composed in Karlstad municipality and whatbooks they may contain. A case study is made to find out which books can be included in theboxes. An interview with staff from Karlstad City Library is made and two different kinds ofbook boxes are analyzed. There is one book box with children books that have a genderperspective and one with fiction children books.The books are analyzed and the conclusion of this work is that it is important to know whatthe children are reading and how books can influence them.