A lot of young athletes have great dreams but only a few reaches the stars. Which ways make it possible for the dreams to come true?This study has made a small research on the Swedish NHL professionals have made their way to the NHL by looking at data about their choices during his career, and tried to see if there is any connection between their paths to every hockey player's dream, the NHL. Results of the study show that there is a anatla different ways to go, but some are more common than others..

This thesis deals with the development of a specification regarding a push-button, which will be used to control the gear-shifting function in an automobile. In addition to this the author will describe different techniques and theories that have been helpful in achieving data and results for the specification.Kongsberg Automotive AB, is located in Mullsjö, Sweden, the company supplies parts to the automotive industry. In the research and development department, R&D, there is a group that works with development of Shift-By-Wire systems. In an automobile with a Shift-By-Wire system the communication between the gear-shifter and the gear-box occurs electronically. The mechanical link is, in most cases, taken away and replaced by the digital system.

This master of science thesis is focusing on how the fault handling on hardware connected toa control unit on a Scania vehicle is working. To the hardware counts buttons levers, sensorsand CAN. The work has been concentrated upon how the fault handling is working and if it ispossible to find any new fault modes.The control unit that has been studied is called the Coordinator and is the core in Scanias threenetworks of control units. The Coordinators work is to transmit messages between the threenetworks and to process signals from buttons, levers and sensors. The values is then usedinternally or is sent to other control units on the CAN networks.

Purpose/aim: My purpose is to illustrate the significance of the language in communication with immigrants having a different native language, who suffers from dementia. The three main questions have been:How important is the native language in the communication with immigrant who suffers from dementia?What consequences can happen for the immigrant who does not understand Swedish? How can we use the salutogenesis point of view to create satisfactory care for immigrants who has difficulties to make them self understood in the Swedish language? Material/method: I made qualitative interviews with staff working in nursing homes with dementia care. I also searched scientific articles and other findings in this area of science. Main results: The best care for immigrants with dementia is nursing homes where the staff speaks the immigrant?s native language.

To succeed, and make money at your animal production you need to feed your animals with high quality fodder. Other condition to succeed is that you keep your production costs at a minimum. To be able to produce baled silage at a low cost it?s very important that the bales have a high density. Density is measured in kg dry matter (DM) per cubic meter. The purpose with this report was to learn more about making silage in round bales and to how much the bale density varies between different brands of round balers.

ABSTRACT This essay is about traffic analysis of Web servers. The purpose is to investigate if companies analyse the traffic on the Web server and if they use this information to create more than simple statistic reports. The questions that we will answer are the following: ? How common is traffic analysis on the Web server among companies? ? Is the Web administrator limited in analysing the Web traffic, if the company has the website on a Web hotel? ? Does the company uses the results they get from analysing the traffic on the Web server for updates and changes on the Web page? To answer these questions we made a questionnaire investigation by telephone interviewing the companies? webmasters. The extent of the investigation was 20 companies in Blekinge. The information we gathered from the investigation showed that it is becoming more common that companies analyse the traffic on the Web page and that they uses the information to more than statistic reports, for example updates and changes of the Web page.

This report shows methods and workflow when exploring the potential to change Outotecs HCD Silver Electrolysis machine to a module type. It?s done as an attempt to lower the workshop and installation costs and to give customer a more accurate prize directly. To do this a concept was produced which was set to a stress test. Additional objectives were to investigate freight and installation procedures, pneumatic connections and to calculate the difference in cost.Once the concept, a reinforced type of the original frame, was chosen stress tests in computer simulations were made and appropriate alterations were made.

This thesis describes the development of a tank insert for diesel cars, from idea to a prototype. The idea is to design an insert which makes it impossible to refuel petrol in a diesel car. The insert shall be installed in the existing tank opening on diesel cars. The tank insert is designed for the Swedish company SverigeGrepen AB located in Vänge, just outside Uppsala. Their main product is a pitchfork that is ergonomically designed and durable.A pre-study were performed in which information relating to fuel caps, tank openings, petrol- and diesel nozzles were collected.

This is a study that aims to discern whether there are any differences between upper secondary level school textbooks published both before The Living History Forum (a government agency that works with issues on tolerance, democracy and human rights) was founded and after with regards to their depiction of Judaism in general and anti-Semitism and the Holocaust in particular. Underscoring the relevancy of this topic, in 1997 CEIFO (The Centre for Research in International Migration and Ethnic Relations) and Brå (Swedish National Council for Crime Prevention) conducted a survey among school children which revealed a lack of knowledge regarding the Holocaust (including whether it had even occurred). With this educational deficiency in mind, this study attempts to determine if there is an active development in text-book authoring regarding this subject.Using Norman Fairclough's critical discourse analysis (CDA) eight textbooks (four old and four new) are examined and compared in order to see if there have been changes in discourse regarding this topic over time. Fairclough's critical discourse analysis is a method used to analyse the relationship between discourse and changes in social and cultural development, and is thus employed in this case to determine if any significant changes have been made in textbooks regarding this topic.As a future teacher in religion it is important for me (and others) to be aware of this type of issue in order to be able to combat it when encountered in schools. It is also important, and part of one?s responsibility as a teacher, to actively and critically work with and review textbooks.This study has not found any major changes in the depiction of Judaism and anti-Semitism in any of the textbooks reviewed.

The aim of this master thesis is to describe some general trends and important steps in the Swedish university libraries user-orientation from the implementation of the university college reform 1977 until today. The aim gave rise to four further questions. Literature studies and empirical studies in the form of focusing interviews have been carried out, in order to answer the questions. Of the entire background material I have made a simple form of general analysis. I found that the libraries, during the years have interacted with the following four interested parties, the government, the mother organization, other libraries and the library users.

In this report you can get a complete instruction about how to build your own development system for the PIC-processor. This card will be used for laborations for the students at LITH-ITN. With this card you can send new assembler codes (new instructions) down to the microprocessor via the Serialport on your computer. Then the new instructions for the microprocessor will start to execute. We made a solder paste stencil at Campus Norrköping solder paste stencil laboratory.

The project has been oriented for development of fixtures to ateljé Lyktan to provide a more efficiency line. In the year 2012 the company invested in a new coating booth, which leads to opportunities to upgrading the fixtures and also new design. The request is to minimize the area for storage of fixtures, and therefore should fixtures be designed to apply as many articles as possible The priority of products that fixtures have development to has been products that are most frequently coated and new products that don?t have any fixtures. The product families that the project has been having focus on is TIME and FOVEA with RONDO.

Environmental enrichment is of high importance for zoos. Borås zoo asked SLU (Swedish University of Agricultural Sciences) for a student to perform a bachelor thesis for them. The task was to develop and evaluate environmental enrichment for their Humboldt penguins. A structure was made, consisting of a sinking skeleton with a floating bridge attached to it. It was presented in an area of the pool that the keepers had experienced that the penguins did not use to any extent.

Aim: My aim with this study is to investigate whether the co-workers in the company Arla Foods is satisfied with the communication between the company and the employees. If there are any changes to be made or if it works well as it is now.Method: I have sent out invistigationforms to 85 co-workers within Arla Foods. This forms included questions about Arla Foods internal communication and how the co-workers apprehend this. I have also made 7 interviews over the phone with co-workers on the dairys around Sweden. Including in these 7 interviews have I also talked and posed questions to representatives for the trades-union within Arla Foods.

This bachelor thesis project has been executed at Outotec Sweden AB in Skellefteå. Outotecs main business focus is selling mineral and metal processing technologies. A rest product from the metal process is particle-polluted gas and cyclone designs are today the most commonly used abatement device for particle control. A cyclone provides a simple design with high efficiency particle percolation by using air streams.The purpose of this work is to reduce the time it takes create new cyclone designs in Outotecs projects. An extensive construction work is needed for every new cyclone order due to new designs.