A home for elderly is planed to be built at Zakrisdal, Karlstad, Sweden. The heat source for the building was at the time not determined. In order by the local government of Karlstad this report is meant to examine if the need of heat could be provided only by solar heat combined with a seasonal heat storage. The problem to solve is, if the need of heat from the home for elderly is provided from only solar heat, whitch dimensions of the solar collectors and the storage is needed?.

SAAB Automobile ABis a car manufacturer within General Motors corporate group. SAABAutomobile ABhas a big part of the responsibility for the brake development in the corporategroup. The car industry is facing harder environmental requirements, which influence the brakedevelopment. The focus is to develop brakes with low drag and sustained brake feeling andperformance. Important characters for the brake caliper are high stiffness and low weight, highstiffness results in high performance and low weight is important because it is unsprung mass.This thesis investigates the possibility to improve the performance of the brake caliper for aGMproject.

Transformation of inorganic mercury (Hg) to methyl mercury (MeHg) is a biotic process that is proposed to be conducted primarily by sulphate reducing bacteria (SRB). The formation of MeHg is of great interest because it is the mercury species that biomagnifies to the greatest extent in the aquatic food webs; about 90 % of all Hg in fish is MeHg. Our understanding of factors involved in the production of MeHg is very important for making a reliable risk assessment. The purposes of this study were to investigate the different factors that control the solubility of Hg and the production of MeHg in a contaminated lake sediment. The lake Ala-Lombolo, Kiruna municipality, is well-known to be contaminated by mercury from different sources. Sediment cores were sampled at three different locations (N, SW and SE) in the lake and divided in three different layers; 0-5, 5-10 and 10-15 cm.

Aeroseum is an aviation museum located in an old military underground hangar. The ventilation system in the hangar is designed for the military purpose of the hangar. This design includes a solution with air flowing through the space between the construction of the hangar and the rock surface. The solution is intended to avoid a buildup of inflammable gases. This design leads too high humidity levels in the hangar.

The number of people in the world and the urbanization increases. This leads to a bigger need of space for the built environment, space that soon doesn?t exist. A large portion of humanity?s energy disposal is used for heating of buildings.

This thesis has treated a three-axis robot which task is to serve a larger test machine tomove the modules to be tested, from the storage to the test site. The robot is composed ofthree linear actuators; two standard components of ball screw type and a custom-builtactuator of trapezoidal type. The work has mainly focused on the custom-built device to seeif it could be replaced with a standard component. Part of the work has been to look into thepicking tool and to see if there are any possibilities to improve its function.The report presents two different proposals which I decided to call Robot 1 and Robot 2 andthey aim to address the problems arising in the purpose-built linear unit and the X-axislinearity problems. Robot 1 focuses on eliminating the problems that arise around therobot's X-axis, with such simple means as possible and without making excessive materialchanges.

This paper aims to, through a literature review, examine how to best design and adapt calf huts to meet the calf's physiological requirements and reduce the infection pressure for enteric and respiratory diseases. It illuminates how the calf relates to different temperatures and climate, which temperature control mechanisms it uses and its ability to perform these regulations, as well as providing a summary of the past decades´ research on the calf huts housing system. These two theory chapters, along with a concluding discussion, provide a better understanding of how to, especially in temperate climates, design the most suitable calf hut, which cater to the calf's both thermal comfort and physical health. The literature suggests that the calf's own temperature control works well to counteract the temperature outside the desired range, and that one of the most important factors rather is ventilation of a calf hut, which reduces moisture and pathogens. The conclusion of this paper is mainly that there is not an obvious way to place and construct a calf hutch and that most design principles contribute to both positive and negative effects simultaneously.

Constantly growing demands from the costumers in the Automotive industry forces the subcontractors to seek alternative ways to compete. One parameter of quality is the components tolerance against NVH(Noise, Vibraion & Harshness) aspects. Kongsbergs Automotive has developed a new gear shifter platform (Shift-by-Wire) that is sold to Alfa Romeo and used in of their car models. However, the company is not pleased with the components sound quality, therefore the main purpose of this thesis is to develope a number of concepts that is supposed to enhance these NVH-aspects.To get an understanding of the problem an analysis of the causes of the emitted sound has been done parallell to a product decomposition, function decomposition and a Ishikawa-diagram. Together with these methods has a litterature study been performed to get familiar with the physics of an impact and especially the emittment of noise.

I got a request from Eleiko Sport AB regarding them needing help with trying to improve one of their products. The following examination project includes the principal- and primary construction reports within trying to make some improvements and optimizations on a stand for Kettle bells. I have in this project both made my own proposals to the stands legs, proposals on how to strengthen the shelf and also made an optimization of the original Kettle bell-stand. In this report, the project goes from idea to being built and analyzed in Catia, including the creation of drawings and material definition..

In southern Sweden, beech (Fagus silvatica) and spruce (Picea abies) are two species with similar demands on soil properties. With increased global warming and high acid deposition the future may bring larger areas were the two species are overlapping, competing for the same soil. The aim of this study was to compare spruce and beech concerning distribution, cultivation and soil properties. From available data comparisons were made between spruce and beech forests in Sweden. Soil analyses were made on samples from beech forest in southern Sweden, with and without natural regeneration of spruce.

In order to attract talented consultants, Sigma, a consultant company, wanted an online game for recruitment. In the game, potential employees? skills could be tested to determine whether they are qualified for the job. This paper presents a general technique for creating such a recruitment game. The report generalizes the recruitment game to a level-based game for the web, where a player should be able to progress from one level to the next by solving a given problem.

There is a need for productivities data and data for different types of machines for comminution of logging residues. The lack of data and studies on GROT comminution makes it difficult to evaluate different chains for handling of residue fuels and make system analyses.Four types of machines with three different working principles were compared at six studies during winter conditions. Three to eleven trials during 9.5 to 30.7 minutes were made on each machine. Samples from the produced material at each study were sieved to determine the size distribution of the comminuted material. Samples were also taken from the studies for determination of moisture content.

This Masters thesis work describes a comparison between two different methods for estimation of the down channel (base station to mobile subscriber) in Wide-band Code Division Multiple Access (WCDMA). The first estimation method, Optimal Feed-forward Channel Estimation (OFCE), is a conventional method that bases the estimates on data that is known to both sender and receiver, so called pilots. The second method, Decision Directed Channel Estimation (DDCE), is an elaboration of OFCE. It also uses user data for estimation. Simulations show that DDCE, in comparison to OFCE, does not attain an improvement in signal-to-noise-ratio (SNR) for high bit error rates (BER).

70 percent of Sweden´s municipalities say they do not have vacant rental flats and a shortage is emerging, during the same time are 1.1 million young people ready to enter the housing market. In order to curb the housing shortage, have the Swedish politicians since the postwar period chosen to stimulate the market with subsidies to increase new production and to control that what is built is in the right direction. The construction industry is perceived as conservative, and many argue that the state keeps it under their wings, which has led to that the development not has progressed in the same way as other, non-subsidy regulated industries.The purpose of ours bachelor thesis is to provide an overall picture and describe the underlying problems of the housing shortage at the rental market. In addition, we want to present theories about where possible actions could take place in the market, by illuminate the problem from the differente actors perspective.To fulfill our purpose and provide a deeper understanding of the problem we have chosen a qualitative approach. We interviewed nine different actors on the Swedish housing market, two managers, two to representatives of Halmstad Municipality, a representative for the construction operators and four different interest groups.

Telia Telesvar is an automatic anwering machine that is provided in your stationary telephone at home. The drawback of this is that you cannot see if anyone has called you. This report describes how a terminal for Telias Telesvar could be designed. Telesvar terminal will show in a display if anyone called you and show the incoming number. It will also play the spoken message in a built in speaker.