This paper investigates the automatic stabilizer and the underlying factors behind its function. The paper includes both a literature review and an empirical analysis. The literature review discusses the IS-LM and Mundell-Fleming models and different ways to quantify the automatic stabilizer. Based on the theory, the relationship between volatility in GDP and the size of the automatic stabilizers is then analyzed with the help of regressions. Our main result shows a negative relation between these two variables.

The discussion about gender and ideals shown in mass media is a subject of great importance for the society in general. Media is playing an essential part when it comes to establish standards and values and we are constantly exposed to all types of impressions, whether we are aware or not. It is therefore of great importance that we understand how stereotypes are built and to gain a deep knowledge that would enrich the area of Media and Communication Studies.The aim and focus of this study was to analyze how male stereotypes is communicated in print advertising and how visual means of expressions helps to construct the masculinities shown. From a semiotic analysis of seven print adverts appearing in the Swedish lifestyle Magazine Café were we able to gain a thorough understanding about how male stereotypes are communicated and built.The result showed that different kinds of stereotypes are in fact used but it is still a hegemonic masculinity that is predominating. Traditional male characteristics are still in use but we were able to see strong indications of effemination, sexualizing and objectifying.

How accessible is the city? Is there more factors than merely the strictly physical that affect how accessible the city is perceived? These questions are the starting point of this study. The greatest emphasis, in this study, is placed on the perceived parameters that affect us humans when we move in our cities. Experiences and internal images can change our behaviour and prevent free movement in the city. The result from this study shows that a city can not be seen as fully accessible unless both the physical and the perceived accessibility are fulfilled.

For some time, there has been a general thought that churches built in the Early Middle Ages in Scandinavia, around the 12th century, directly replaced cult buildings or cult sites from the Late Iron Age. There are archaeologists who have criticized this and were instead skeptical that churches at all were built on places where a pre-Christian cult building existed. Several examples from Scandinavia contradict this and show a continuity of place and cult from the Late Iron Age to the Early Middle Ages. The aim of this thesis is through a spatial analysis, study Late Iron Age archaeological sites in the landscape around thirteen churches located around lake T?kern in the western part of ?sterg?tland, to see if there is a place and cult continuity from the Late Iron Age to the Early Middle Ages at the selected locations.

The purpose of this report is to compile and examine the cost of renovation of moisture-damaged bathrooms, to derive a target price. The target price can then be used by insurance companies to estimate the ultimate cost of future bathroom renovations.       The method is based on the compilation and comparison of the cost of repairs of previous water damage in bathrooms. The calculations compiled based on repair estimates for different insurance losses from one of the leading insurance companies in Sweden.       The result shows the average price per square meter of floor area for different sizes of bathrooms. The average price is the basis for the estimate of future renovation costs of bathrooms. The results further show that the bathroom finishes, area and the distance between the entrepreneur and the location of the renovation have great impact on the final repairing cost.

Title: Veingeskolan F - Investigation of the indoor environment and a structural analysisMethod: Complete analysis of structural drawings to determine if the school have been constructed correctly. In my teorethical studies of the drawings I must seek out points that may have been damaged from moisture, this contains a full survey of the foundation, walls and ceiling. To strenghten the data collected from the drawings I must visit the school and do field investigations to find out if the school has any problems with the indoor environment.Analysis: I determined that we had some damages on specific places, these damages was caused by leaking roofs, a carpet that was tarnished by strong sunlight in connection with some type of glue and also the ventilation that may have been drawing malodorous air from a shaft in the foundation.Conclusion: I was able to see that the decision to demolish the school was quite drastic, if the county would have done continuous fixups on the construcion when the employes had complained maybe the action to the tear the school down would have been unnecessary. The lack of communication between the two parts lead up to the decision to demolish and build a complete new school..

In a sequence described in the next paragraphs, I remove the poorly insulated roof of Gustavsberg Porcelain Factory and make new use of its  foundation. The monolith cement slab, once supporting heavy industrial machinery, is now the site of lakes and other movements:The top floor area is split, and a new built volume, one story higher, overtakes the southern half resting on the factory?s basement, digging into it at its western and eastern ends. Striking horizontally, the fissure exposes a long central axis, taking advantage of the factory?s horizontality to articulate vastness .

This master thesis was a continuation of a previous study in the diesel exhaust characterization, which is part of the academical work embedded in the EMIR-1 project. The main objective of this thesis work was to finish the installation and make the proper modifications of the particulate mass measuring system located in one of the engine test cells at KTH, in order to be able to measure the mass of the particles from the exhaust of diesel engines.This experiment requires a diluted flow sample from the exhaust that should be sent to the device that makes possible the measurement of particle mass, called TEOM. In the first stage of this project, the objective was to study and make the proper modifications in the existing KTH diluter because there were several problems to obtain a constant dilution ratio from it during tests.This modifications were made and it resulted in a great improvement in the maximum inlet and outlet flow that this diluter can handle. Therefore another modification is proposed for controlling the inlet exhaust flow so it will be possible to regulate the dilution ratio and make it constant along a wide range of engine loads and speeds.The second and most important stage was to make particulate mass measurements possible by analyzing the frequency signal from the TEOM device. The idea was to obtain the frequency of oscillation from the tapered element in the TEOM, and therefore with the proper correlations, be able to predict the particulate mass concentration in the exhaust flow from the engine.An electrical problem in the TEOM circuit was detected and corrected, so the signal that carries the frequency from the TEOM can be analyzed properly.

The purpose of this thesis has been to; based on interviews with four teachers in Stockholm city, get at picture of preschool teacher?s viewpoint on children?s influence in preschool.Research questions: How is the children`s influence looked upon by the teachers in preschool?, In what ways do children?s influence affect their learning, In what ways are the interviewed preschool teachers working with democracy in preschool?To carry out this thesis, I used the qualitative method. In the qualitative method, use is made of the interview method to collect empirical data with interviews. I interviewed four preschool teachers from three different preschools. This thesis is built upon John Dewey?s philosophical thinking as a theoretical base.The result of this thesis shows that all preschool teachers felt that the application of children?s influence in the daily activities, although complicated, is essential in their work.

This report examines the prerequisites for LEDs to replace other technologies indifferent applications. How does the different technologies for light generationwork and what are the advantages and disadvantages? The various technologieslimitations and characteristics provides the opportunities for the LEDs.This report describes a test-construction built to examine what practical arrangementscan be built with modern light emitting diodes, in order to showsome of the possibilities. The construction consists of three different applications,a high power lamp based on cold white LEDs, one based on warm whiteLEDs for the evaluation of the light characteristics and a RGB-LED based lampable to mix any colors quickly and seamlessly. The test construction also containsthe essential peripherals including control-electronics, optics and a custombuilt watercooling solution.The potential for LEDs is huge but it is complicated to build LED based applicationsdue to the limitations which mainly includes the electronics and theneccesary cooling.

The importance of energy- and environmental issues has increased, and the work towards reducing carbon dioxide emissions plays a major part. The European Union has set up goals for the membership countries to work towards this to happen. The carbon dioxide emissions in Sweden have been reduced the last few years, but there is still a lot to do. About 30 per cent of Sweden?s carbon dioxide emissions generate from energy usage related to housing, this is why the housing sector is of interest to examine.

In this study I examine the debates, intentions and ideas concerning the physical and created schoolroom as they appeared in the journal Lärarnas Tidning - Svensk Skoltidning (Teachers Journal ? Swedish School journal) during the period 1962-1974. The built and created school building and its environment has been a relatively neglected topic in Swedish pedagogical research.When the Swedish comprehensive system transformed during the sixties, with new curricula and a common nine year school, many school professionals realised the need for a new and pedagogically adjusted schoolhouse.The early seventies marked a decline after a ten year period with an extensive building program affecting large parts of Sweden, and where schoolhouses had been an important part. The debate concerning the new Swedish school building was sometimes inspired and refreshing, but resistance and bitterness was also expressed. In part, this should be seen against the backdrop of the introduction of a new educational system, using new and sometimes untested pedagogical ideas, together with the fast transformation of the Swedish society.The research method is an exploratory textual analysis focused on five different issues: ideas concerning community centres and integration, participatory and democratic issues about the built environment, the school building as a pedagogical tool, aesthetic considerations, and the working environment.

The task for this thesis is to design a tool that is used to cut-out preforms of thermoplastic adhesive and also to make an estimate of costs for the stamping tool. The tool is used in the repair process at the MCM production line. The result of gathered information has affected how the design of the stamping tool has developed. The handling of thermoplastic adhesive in the repair process is one of the factors that influenced the design. The adhesive is sensitive for exposure to moisture. Therefore an automated feeding system of the adhesive is not recommended. The users wished for an automated stamping tool.

This report is about accessibility in a station environment. Studies have been made about how an accessible building should be designed. Accessibility is an important issue when striving for a society with equality as the foundation. Sweden is one of the most accessible countries when speaking about the built environment. A result of prosperity and a well-managed democracy.

Often, the green is handled as an opposite to the built, but if it could be seen as a part of the built and the society, the planning will be easier to handle. The thesis work wants to create a method that treats villages in an analytic way in a context; with green, blur, grey and all the other colors that together are the completeness.This master's thesis is made to be used as foundation in detail plannng in the municipality of Örkelljunga. Target audience is on one hand those who work with planning and green matters in Örkelljunga municipality, but also other planners who work with landscape.Literature in the field of green city planning has been studied and 30 methods for analysis have been valued. The method for analysis that has been used in this work is a merging of ten different methods and has included literature studies, sketches, interviews and work on spot. The ten methods are consciously chosen to together make one comprehensive and true image of the village, as far as it is possible.