Processing information in complex everyday life recruites different abilities than limited storage capacity. Working memory, the central executive and inhibition are constructs that have been used to describe this ability of adaptation. This paper investigates the connection between working memory capacity and performances in tasks closely associated to real life situations, i. e. verbal fluency tasks.

Denna rapport beskriver en produktutvecklingsprocess som behandlar utvecklandet av ett textilt material som isolerar och skyddar. Det textila materialet ska fungera till ett kylande fodral utan att förstöra dess funktion och behöver därför uppfylla en speciell kravspecifikation. Materialet ska isolera mot kroppsvärme, vara stabilt, skyddande och slitstarkt. Dubbelväv valdes tidigt i arbetet då det är ett enkelt sätt att kunna påverka det textila materialets egenskaper i form av material- och konstruktionsval, i en betydligt större utsträckning än i en enkelsidig väv. För att utveckla ett material med de efterfrågade egenskaperna har tester utförs och den metod som har använts är hypotesprövning.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

Museums are a part of the cultural sector that over the last couple of years had to compete with the steadily growing consumption of spectacles. New techniques to attract and amaze the visitors have evolved. Living History Museums has developed a method to simulate past times by building up an environment with reconstructions. History is a non-definite science, there will never be an exact answer to how it really was, for example during the Middle Ages.This essay deals with the difference between reconstructions and authentic artefacts and how they build up an illusion of the past. In what sense does it matter if the artefacts are genuine or not? How do these museums deal with anachronistic phenomena from today's modern world in the historic environment? Additionally I discuss whether or not these reconstructions - of environment, buildings and personal characters - have any influence on the historic narrative given by the museum.

There are many elderly buildings, particularly those constructed during the million program, in need of renovations and plumbing replacement. An alternative to the traditional plumbing replacement is the relatively new and untested technique called relining. The purpose of the study is to thoroughly investigate the different types of relining that are currently available on the market to help enhance Peab?s knowledge before purchasing relining services. The theoretical part of this report is based on relevant information provided from companies, previous studies, investigations and reports within the area.

There is always a need for more effective ways to store energy in order to reduce the human impact on the environment. One step on the way can be the use of flywheels as kinetic energy storage devices. Low frictional losses are essential for a flywheel to be effective. To minimize these losses active magnetic bearings (AMB) can be used to keep the shaft centered instead of the more conventional ball-bearings. AMBs use actuators and a fast control system that needs correct and noise-free measurement data of the shaft position and the current in the actuators to work properly.This thesis explains the process of constructing power electronics and a current measurement system for active magnetic bearings (AMB).

Fönster blir idag en allt viktigare del av en byggnads klimatskärm. Det ställs därför krav på olika funktioner vilka måste uppfyllas oberoende av fönstertyp. Då glas blir vanligare i moderna konstruktioner ställs det högre krav på värmeisolerande förmåga. Cirka 35 % av en byggnads värmeförluster sker genom fönster. Detta ställer krav på tillämpning av energieffektiva fönster vid ny- och ombyggnad. Underhåll av fönsterkonstruktionerna är en oundviklig detalj och måste ske någon gång under en byggnads livslängd.

Industrilandskapet is an area in central Norrköping who has undergone major changes during the 1900s. The area has in recent decades gone from being an important industrial area into a place that today is focused on knowledge production and visit activities. This study focuses on how four selected businesses in Norrköping look at the change that Industrilandskapet has undergone. The four businesses all have in common that they use and care of Industrilandskapet in both marketing and as a working place. The businesses are in this study represented by four informants who were interviewed with semi-structured interviews.The results from the informants are analyzed by support of theoretical points.

If you have access to wood, a wood burning boiler is a cheap way to heat your home, but it is certainly not the most convenient option. Wood requires many operations and management, which takes time. One way to reduce this workload is to have a modern boiler with automatic ignition. Enertech/CTC has a desire to create an accessory with automatic ignition to a modern wood burning boiler. Today there is no boiler on the market that can ignite firewood automatically without the introduction of paper and sticks.

Every year new premises are built in Sweden, and even if they are made as energy efficient as possible, this will not reduce the energy demands, but the rate of the increase of the energy use will be reduced. One type of facility in Sweden that is a major energy user is public baths, and this makes public baths an interesting facility to study more closely. There are around 500 public baths in Sweden and about 75 % of those can be seen as older baths with large need of renovation, and they all require a high level of energy efficiency measures. To show how the energy demand increase or decrease depending on the changes chosen to be made, the simulation application IDA Indoor Climate and Energy was used. Simulations were made and compared for several cases, with two extreme cases as starting points.

This project includes a small study of Västerås city's housing needs, and a proposal on theuse of the property 1:207, Lantmännens silo in the Eastern Harbour, Västerås.The project intends to produce a basic study of the useful systems for this rebuilding projectwith regards to sustainable development and energy saving light buildings.The end result, which consists of a detailed visualization of the proposal, intends to becomean iconic natural focus for the Eastern port of Västerås and an example of the use andadaptation of existing structures.The property must also link the eastern parts of Västerås with the center through anextension of Mälarleden.The work has been performed through literature studies, site visits, contacts with the City ofVästerås and by calculations.The proposal consists of architectural proposals drawings and visualizations.Furthermore, a suggestion is given of how the property can be used and fitted into theoverall plan for urban density development currently underway in the city of Västerås.Computer programs used have been Microsoft Office Excel, AutoCAD and ArchiCAD..

A baggy paper web has parts that are longer than neighboring parts. One of the assumed reasons for bagginess is thickness variations of the paper. In the roll the thicker streaks then add up to form a ridge. In the ridges the paper is strained and during storage the strain may become permanent. When the paper unreeled it is then baggy.

Structural rationalizations and regionalization of the agricultural sector in Sweden has lead to unevenness in thedistribution of plant nutrients. Nutrients are lost from crop producing farms as harvest products are sold, whilefarms with animal production often have manure in excess of their needs. In addition to this the retention ofwater and nutrients in naturally occurring wetlands has decreased due to a reduction of wetlands in number andsize in the agricultural landscape. This increases nutrient levels in agricultural run-off and causes eutrophicationas well as nutrient losses from arable soils. One potential solution to both problems would be to store nutrientrichsurface water from agricultural areas and use it for irrigation of agricultural crops.

The aim of this study has been to create a future scenario of what archiving might look like in the future. The main theory used in the study comes from future studies, but also a theory about the social impact of technology on work were used. The questions that were analysed were about the tasks of the archivist, the appearance of the archival institution, collaboration with other LAM institutions, knowledge requirements for the archivist and the amount of archivist positions. The method used in the study was scenario writing, which derives from future studies. The source material consisted among other things of regulations and laws related to archiving together with some archival manuals.The tasks of the future archivist will probably consist of the same tasks as those of present archivists who work with digital archiving, even though archivists probably forever also will have to work a little with paper records.The future archival institution will probably retain its paper records and keep its digital records on digital storage media.

This thesis is done in cooperation with SWECO Energuide in Växjö. They have been assigned by SKB in Oskarshamn to renew their electrical power supply and the ancillary processing systems in their Central provisional storage of spent nuclear fuel, CLAB. Today in the CLAB facility, the spent fuel is cooled down with water pumps, driven by asynchronous induction motors, where the water is regulated by mechanical valves to the desired flow. After the upgrade, the engines will be powered by AC drives that can control the pumps by changing the rotational speed and thus change the water's cooling effect on the nuclear fuel. In this study, I investigated the interference AC drives causes the feeding network and how to go about averting them.