Successful broiler production in hot climates requires knowledge of how birds are affected by heat stress. It is important with access to water and good ventilation to facilitate coping with the heat. It may be useful to reduce the consumption of feed during the hottest hours of the days, which together with a few hours of extra light available could improve both productivity and animal welfare. The vision in birds is superior to that of humans and most other mammals. Continuous light and light with low intensity can cause eye injuries, affect the eye development in young chicken negatively, as well as provide increased incidence of foot pad lesions. Access to light affects the production but also the welfare of birds.

Suggestion for a new operahouse in stockholm, förslag på nytt operahus i stockholm. Stockholmsoperan..

Sveriges kulturhistoriska bebyggelse bär viktiga historiska spår och har varit en starktbidragande faktor till samhällets utveckling. Dessa byggnader utgör konkretahistorieberättare som åskådliggör hur samhället har förändrats med tiden. Bevarandet avhistoriska byggnader av detta slag, är därför mycket viktigt för att dessa värden inte skallgå förlorade. Respektive kommun har i detaljplanen möjlighet att skydda bevarandevärdbebyggelse genom att skapa varsamhets- och skyddsbestämmelser för de fastigheter ochområden som anses vara värdefulla ur ett kulturhistoriskt perspektiv. De flesta av dessabyggnader tillhör dock äldre byggnadsbestånd och kräver därför regelbundet underhållsochrenoveringsarbete för att överleva och uppfylla dagens krav på såväl energieffektivitetsom intern komfort.

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

In the thesis we have shown that it is possible with current technology, to buildneighborhoods that are largely self-sufficient. We have obtained some information aboutongoing work in the field of energy efficient buildings and active house which we have usedto develop a model. The feasibility study for Ranagård we have e.g been forced tofollow laws on groundwater covered, resulting in the construction of basements for singlefamilyhome is not possible. The model that we have built up overtime has been the central part of the work. The model illustrates very well what an activehouse neighborhood means and potential of such an area.

Idag värms glasugnar upp med antingen gasol eller olja, detta projekt vill visa på möjligheten att istället använda gas från biobränsleförgasning som förbränns utan synliga flammor. Detta skulle miljömässigt ge fördelarna att biobränslen inte bidrar till växthuseffekten och ge förutsättningar för att minska kväveoxidutsläppen genom bättre teknik än dagens.För att visa att det är möjligt att både behålla produktionen och reducera kväveoxiderna med förgasningsgas konstruerades en modell av ugnen och strömningsbilden studerades i vattenmodell. För att undersöka värmeöverföringen i ugnen behöver en eller flera kalorimetrar konstrueras för att kunna användas vid varma försök. Dimensionsberäkningar gjordes som visade att detta är möjligt med vissa typer av kalorimetrar..

This essay concerns the interpretation of house plans in three-aisled longhouses and hall-buildings, in Scandinavia during Iron Age. Full scale house reconstructions need a better basis of interpretations to understand the patterns of roof supporting post holes in excavated house plans. This has led to the thesis, presented here, that the layout of house plans during Iron Age is based on geometrical proportions. In order to prove this, geometric house plans were applied and compared with excavated house plans in 11different case studies, including the fortification of Fyrkat Denmark. It was found that all house plans in the case studies indicate, that the geometrical proportions 1:2, 1:3 and 2:3 of a given circle must have been used for the basic layout of the roof supporting post holes, using a compass and a straightedge.

This text answers the questions how do we define what a campus is, how the concept of the campus came to exist and how it is used today, and how the Blekinge Institute of Technology (BTH) campus can be designed according to site conditions and the conclusions drawn from case studies at Chalmers University of Technology and Karlstad University. The purpose of the case studies is to gain insight into their campuses advantages and disadvantages. This finally results in an interpretation of how the Blekinge Institute of Technology campus can be planned. A campus is the area of land on which a college or university and its surrounding buildings resides on. Campus as a concept meant a field at first, it later evolved at American universities due to their design of college campuses.

AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

In most countries, the dairy industry focuses on the volume of milk produced instead of its composition. This results in a high content of water and a lower proportion of fat and protein. A high proportion of water is not desirable when processing the milk into various dairy products like cheese, cream and milk powder. High water content also increases the costs for transport and storage, and also an unnecessary, albeit marginal, strains on the world?s water reservoir.

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

The main purpose of this thesis has been to identify and discuss problems connected with the preservation of newspapers in Sweden. Another purpose was to see if the preservation of newspapers has been influenced by the fact that preservation studies in general concerns printed monographs and digital materials. This qualitative study is partly based upon interviews with four librarians experienced in working with newspapers and preservation. The thesis deals with cultural heritage in general and on a more specific level with newspapers where the following questions are dealt with: Why preserve? Who preserves? How to preserve? and What is preserved? Strategies used for preserving newspapers such as paper, microfilming and digitization are described as well as legal deposit, the Swedish microfilming programme and TIDEN, a digitization project of newspapers.

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.