Sweden has formulated ambitious energy goals which signify that by year 2050 the energy usage should be halved. One of the objectives is the reduction of energy usage by 20% by year 2020 and that it should be compared to the usage of energy from 1995. In parallel with increased energy requirements for buildings the demand on housing conservation, by highlighting also buildings from the last 50 years as part of the building heritage, continues to enhance, which in theory means that there is a conflict between these.The law will never be able to point out unique buildings and PBL (planning and building act) is not especially concrete. The National Housing Board has tried to make this more concrete by the new BBR regulations though there are still an enormous variety of interpretations.This report deals with the conflict between conservation requirements and additional insulation of the building envelope and is limited to multi-residential buildings built between the years 1945 and 1975. It is the stock with the greatest energy consumption and that is where the big challenge lies.

 This report will describe a project between two students from Karlstad University and Markus Norström from Hovercraft solutions. The project aim was to develop a cabin for the hovercraft 380TD. The project was divided into two sub parts; one concerning the design of the cabin and one concerning the engineering. Throughout this rapport you can follow the engineering part of the project. The project has followed a systematic product development process resulting in optimized results for material selection and engineering solutions.

This Master thesis focuses on change conditions and change ambitions in Swedish public libraries. I have chosen to focus on three libraries that participated in a much-debated developmental project sponsored by the Swedish Arts Council almost twenty years ago. The aim of the project was to enhance service-quality, increase user-influence over media acquisition and library routines, and to redefine the concept of quality in the library context. I have made comparisons of the conditions and change ambitions between the project period 1991-1994 and present day 2009. To do this I have analyzed the evaluations of the above-mentioned project and the developmental plans that every municipality in Sweden is required to write according the library-law of 2004.

Energy-wise houses in Järinge - technical follow-up The company JM built energy-efficient houses in Tensta in Stockholm. They have built a total of 16 houses divided into two parts of A-houses and B-houses. The buildings are an attempt by JM to minimize energy-use of the buildings without affecting the comfort and living standards. The project aims to examine the data for the 16 houses on the basis of data and produce a report showing how the buildings worked through a technical perspective. JM approximates that the purchased energy will not be higher than 95 kWh/m2 per year.

In industries today the demand for reading the state of industrial equipment and thus prevent machine breakdown, is increasing. The company HMS Industrial Networks AB has a product on the market, Netbiter EC350 that is used to read sensors and thus find out the condition of industrial equipment. By reporting scanned data to users through a cloud service, users can keep track of their equipment. When developing Netbiter EC350 a slot was made for a Bluetooth module to offer clients a wireless reading in future developments. In this project a prototype was made to show how this Bluetooth communication can be implemented. The goal of the project was to create a Bluetooth communication between a Bluetooth sensor and Netbiter EC350. A user interface was made to allow the user to read sensor values. The result of the project shows how a Bluetooth communication can be implemented to read sensors wireless and therefore it fulfills its purpose and goal.

I contacted the production company Salmonfox in the hope that they would have any projects that they needed help with. It showed that Salmonfox just started up an old project that they needed to complete. They wanted my help to edit some trailers and one crowdfundingfilm for the short film called, Captain Sweden (Kapten Sverige). Salmonfox are hopefully going to use the different trailers and crowdfundingfilm to promote the short film and get help with the funding to make a feature. The project began with a pilot study in which I made a time plan and a requirements plan, where the different requirements were set.

Purpose: The purpose of this study is to examine how a company with a single brand is perceived as uniform, as well as how they use internal brand building to reconcile various competing actors within one brand. Furthermore the aim is to examine how staff, through internal brand building processes, perceives and identifies themself with the values of the common brand. Method: A case study with method triangulation was conducted at Nordiska Kompaniet department store in Stockholm. Quantitative data through a questionnaire survey with employees combined with two observations. Qualitative data was given through an email interview with a responsible manager of digital channels and PR from NK AB.Theories: This study has used the following theories; Destination marketing, Corporate brand, internal branding, corporate identity, corporate culture, brand value, service brand values, brand citizenship behaviour.Conclusion: This case study of NK has shown that internal branding building in a department store is a comprehensive work, which all involved must have a unified perception and understanding of the brand, in order to successful unite under one brand.

We have the tradition in Sweden to build villas and houses with a wooden framework. It has become natural for us because we have so much forest in our country. Building with wood has advantages, it is easy to process, but also disadvantages, as it is sensitive to moisture.Finland has long made use of the thermal blocks to build villas. It is a type of bricks that are a bit like a sandwich element, with a core of EPS and concrete on both sides of the core material. The concrete is hollow, so that after the walls has been bricked up you pour concrete into the hollow bricks.The issue of this report is to find out if concrete can be an alternative to wood as framework material in villas.

The purpose of this study is to show the technical building requirements for modern arenas inSweden. The study will also create an understanding of how the requirements affect theSwedish football arenas which are affected by the regulations valid from 2014. As one of theSwedish football arenas there is Örjans Vall located in Halmstad. The aim of this study is todevelop alternative solutions regarding the technical problems Örjans Vall is facing 2014,when the new arena requirements for ?Svensk elitfotboll? are taken into use.

This project measures the upper bound of exposure time for laser reflection detection in the software DotDetector. Via measurement of the exposure time for which distortion happens in a room lit with everyday light we conclude that the upper bound for exposure times are 100 milliseconds. This value does not change as long as the lighting in the room is the same. As future work this project proposes variable upper bounds depending on secondary lighting in the room. Also we propose automating the colour masking of the detection algorithm..

This thesis examines how knowledge management professionals use trust as a component in the creation of knowledge management systems, and what methods they use for building trust.Adopting a grounded theory approach, interviews with 8 knowledge management professionals active in different industries served as the base for an analysis that identified trust to be the single most important common factor in the data. The concept of trust used by the informants was identified as relating to the knowledge management system itself, rather than other users, employees or groups in an organisation.Building trust, the KM-professionals mainly focused on three methods: simple solutions, system superiority, and implementation security. Using these methods, the KM-professionals seek to ensure system trust by creating opportunities for users to obtain positive experiences of using the system, and thereby generate a foundation for a trust-based relationship between the user and the system..

Akademiska hus is a real estate company that specializes in providing Swedish universities with housing facilities for educational and research purposes. The company strives to reduce its use of energy by 40% between the years 2000 and 2025. The aim of this thesis is to determine which measures can be taken to reduce the need of purchased energy in a building that is used by theSwedishUniversityof Agricultural Sciences inUppsala.In order to determine the results of various changes to the building envelope and ventilation system, the building was modelled in the computer simulation program VIP-Energy. Other proposed changes to make the use of energy more efficient concerned water use and lighting. The need of purchased energy can also be reduced by producing electricity or heat on site, using solar energy.Results show that economically viable measures include upgrading windows and faucets, adjusting control systems for ventilation and lighting, and installing roof mounted solar panels for power production.

Requirements management is an important part of the software development process. The success of a project may depend on how this is handled. Even though several research studies indicates that more attention should be paid on non-functional requirements, the primary focus in practical projects still regards identifying functional requirements. Especially the prioritization of the non-functional requirements has been proven to be of great importance for the success of a project.This report investigates basics in agile requirements management involving opinions from experts from a software development company. This is done with help of existing literature and interviews with key actors involved in prioritization at the company.

In order for construction projects to be completed within the specified time limit while at the same time be financially sustainable it requires thorough preparation and an extensive planning. Most essential is the groundwork and the design that determines the project's progress. There are many aspects to consider in order to avoid inconveniences such as delay, litigation, unexpected cost etcetera. If mistakes are made in an early stage it is very likely that the error will follow the process and become an expensive correction cost towards the later part of the project. In other words, it is expensive to rectify defects later on.

The purpose of this report is to examine various roof structures that can operate in a warehouse with large spans. The building that is examined in the report is currently under construction, and the roof construction has already been selected. The selected roof system will therefore be compared with some other structures and materials that have been possible. The report will evaluate three different frame materials, two insulating barriers and two overlaying materials. Another important part in major construction projects is the roof safety.