Sök:

Sökresultat:

1696 Uppsatser om Building permit - Sida 44 av 114

SOLPANELERS MÖJLIGHETER, EN AKTUELL RAPPORT FÖR MONTAGE PÅ FASTIGHETEN KORNHILL

This thesis deals with the possibilities of installing solar panels on a property, the building is owned by Kornhillschurch and called Kornhill. The owners of the property wanted to learn more about potentials for installation of solar panels on the property, therefore we described different types of solar cells and solar cells essential function to generate electricity in the report. Different factors that are limiting the generated energy are mentioned.An investigation of the property?s potential has been made in order to consider different designs. When sites that were considered suitable for solar cells were selected, different design options were made, one for each site.

Möjligheterna för Casabona-systemet

Abstract New methods, techniques and tools for the building industry are constantly being developed and improved and launched on the market. The problem in the building industry development is not that the products are not good enough. The problem is instead that the existing construction companies do not choose to use these innovations, instead they continue to employ the technologies they already possess and master. This leads to the fact that the construction industry is, in the public eye, beeing seen as a conservative industry. AquaVilla is a company that basically produces houseboats.

Diagnostisering av projekt : En studie med utgångspunkt från SPA-ramverket

The work in project has been around since humans began to hunt in groups, building bridges or building of the Great Wall of China. In 1960- and 70´s, the word project got their value it has today. A project means a work done during a decided time, with decided economy and non-recurring nature (Jansson and Ljung 2004). The projects had a general analytical model. It was used for all projects the organization engaged.

Styrmekanismers funktion i relationsbyggande: En studie av ett relationsnätverk i verkstadsindustrin

The aim of this study has been to examine the role of control mechanisms when it comes to building relationships in a small business network. In order to reach this goal, we have performed a case study of a Swedish supplier of machines to the engineering industry, which acts as the exclusive representative of a foreign manufacturer on the Swedish market. Main results: A number of control mechanisms, both formal and informal, could be identified in the network. Their specific use, as well as relative importance differ between different actors in the network. In general, the importance of formal control mechanisms decreases as the relationship evolves over time and the importance of informal ones, mainly trust, increases in a corresponding manner..

Hållbar vattenförsörjning i områden med vattenbrist : Sustainable water supply solutions for areas affected by water shortage

In some coastal areas in Sweden water shortage sometimes appears because the withdrawal of groundwater is greater than the groundwater recharge. It creates a situation where the available groundwater is insufficient to support residents and businesses with drinking water. The high withdrawal of groundwater also creates a risk for saltwater intrusion to drinking water wells. The problem most commonly occurs during the summer when the groundwater recharge is low, but the population is high, due to tourism and summer residents.The purpose of this study was to investigate how local water supply in areas affected by water shortage can be solved as sustainable as possible. The work was divided into three parts where the first part comprised of a literature review on water systems in which four different options were investigated: artificial groundwater recharge, rainwater harvesting, desalination and water reuse.

Skeppsteknik : en studie om teknikutveckling hos skepp i Medelhavet

Techniques used in the building of a number of ships from the Mediterranean will be presented in this paper. The two techniques thnat will be discussed are shell-based technique and skeleton-basedtechnique. An attempt to clearify and delineate the transition between these two techniques will be made. The possible reasons for transition will then be described and discussed. The development ofthe techniques is going to be identified with help from four wrecks by analyzing their edge joineriesand this facts will be used as a basis for a chronological presentation.

3D PDF

This report is about Adobe Acrobat 3D and their new PDF format witch can contain 3 dimensional models that are interactive. The purpose is to find out if the program and the format work in a level that is suitable for the market. To create this PDF you need Acrobat 3D installed on your computer but it only needs Acrobat Reader 7 or 8 to open it, and the Reader is free to download on the internet.The examination is focusing on four formats: U3D, 3DS, DWG and DXF because they are the most common in the building industry seen from the architects? way. From a 3D model exported to these four formats they where converted to PDF in different settings to be compared in different points as information and size of the files.

Punktmolnshantering i anläggningsprojekt : Utvärdering av programvaror för framtagande av markmodell

An increased number of participants in the construction industry is asking for accompanying terrain models to the project in order to get a better understanding of the field. When the desire to create buildings that fit together nicely with the surrounding area is increasing, it becomes more and more important to have a broad base of knowledge about the ground on which the building is to be erected. Terrain models are also very useful in the planning of logistics, documentation for landscape architecture projects, and billings for mass calculations.Surveys for creating terrain models can be performed with laser scanning. The advantage of laser scanning is the time-effective surveying, the detailed information as well as the ability of application in complex environments resulting in a cost-efficient project. With this in mind our thesis was defined in collaboration with the company Bjerking AB in Uppsala in order to investigate if there were any softwares suitable for terrain modeling.

Samhällsekonomisk analys av ett djupförvar för använt kärnbränsle i Forsmark :

This thesis investigates the socio- and environmental economic effects of a deep repository for spent nuclear fuel in Forsmark in the municipality of Östhammar. I seek to show the general picture but focus on the effects on employment, environment and income. Cost-benefit analysis is used to investigate the differences in utility between a scenario with and a scenario without a deep repository in Forsmark. Most of the possible effects can not be valued and many can not even be quantified with the data available today. Therefore this thesis has a bit of a ?preliminary study character? and seeks to show what we know today and what needs to be further investigated when available data allow it. The costs that could be valued are noise from the traffic during the period of building and emissions of carbon dioxide and nitrogen oxides from the transportation of rock masses during the building period.

Korruption och intressekonflikter : Hur hanteras offentliga intressekonflikter av den svenska lagstiftningen?

   Officially, Sweden has a very low level of corruption and in 2008 topped Transparency International?s list in terms of the perception of a lack of corruption. However, on closer examination it would appear that the Swedish public sector is not as clean as the Transparency International list suggests. What appears to be relatively common and quite widely accepted in Sweden, especially in local government, are conflict of interest situations in which public officials use their position to obtain advantages for themselves, their friends and their colleagues, in particular with respect to public procurement. According to the Swedish constitution, the public administration shall be governed by the principles on legality and objectivity. Grave violations of these principles are deemed illegal and contrary to the penal code provisions relating to bribery, public misconduct and breach of confidentiality.

Tilläggsisolering inom byggnadsvård

Främsta anledningen till en tilläggsisolering är att det önskas bättre energihushållning i en byggnad. Detta kan göras med olika material och olika tekniker. Inom byggnadsvårdssammanhang förs det en diskussion om de fuktbuffrande materialen är bättre vid tilläggsisolering då de är hygroskopiska än de icke hygroskopiska som är mest frekvent använda i det konventionella byggandet. Denna rapport utvärderar om det finns några dokumenterade fakta som styrker att de hygroskopiska och ekologiska materialen fungerar bättre i byggnadsvårdssammanhang än de icke hygroskopiska. Olika isolermaterial från de två nämnda grupperna jämförs utifrån olika parametrar..

Kväve i Östra Mälaren : hur kunskap förvaltas och används i tillståndsprocesser

The nitrogen cycle in freshwater bodies is complex and consists of many separate processes affected by a number of important factors for example oxygen concentration in the water, temperature and circulation. Knowledge of the different components of the nitrogen cycle exists; however, a complete and comprehensive picture is difficult conceptually as well as theoretically. The available literature illustrates that the research on nitrogen and the related freshwater processes is still associated with high uncertainty of how much of the supplied nitrogen from the catchment is transported with the water versus and how much is lost due to denitrification, sedimentation or uptake by plants. This report is an interdisciplinary survey of Nitrogen discharge permitting. The research focuses in particular on the decision-making process, the levels of scientific standard and the administrative framework.Application for Nitrogen discharge permits are decided by the Environmental Court with council from their own experts as well as relevant government authorities and organisations.

Utveckling av metod för erfarenhetsåterföring vid stadsbyggnadsplanering

The paper is a thesis made by three students in the engineering program at Jönköping School of engineering. The thesis was overseen by the urban planning office and features data from Jönköping County.The purpose of the thesis is to improve future central districts by improvement of work methods. The aim of this thesis is, through an evaluation of process mapping, develop a model for systematical work methods with better experience feedback in the urban planning. The following three questions have been answered:? How is the process mapping of the urban planning in Jönköping County built today and how did it affect the current district Kålgården?? How can the urban planning of Jönköping improve with a more systematical work method with better experience feedback?? How can critics elaborate the developed method to make it enough stable and in general applicable method to enforce on future districts?Literature studies and interviews were made to review the work methods of the office of urban planning as well as how their experience feedback works.

LCC-analys av FTX-system : En jämförelse av centralt- och lägenhetsplacerat

This report is the result of a thesis conducted at the consulting firm Bjerking AB andis the final part of the Bachelor Programme in Construction Engineering at Universityof Uppsala. The work aims to investigate the costs and how the choice of ventilationsystem affects building projects during a long-term period. This report covers costssuch as investment, maintenance and energy but also how they affect residents andbuilders. Building regulations for energy consumption are expected to be tougher;therefore a comparison of two different heat recovery ventilation systems(HRV-system) was made. One system is based on a centrally placed unit that coversthe whole buildings ventilation through vertical shafts.

Budgetens roll innan och efter finanskrisen

Immersion is a construct that measures how deeply engrossed a user is with any mediated situation. In the field of game design, immersion is a significant aspect of what makes a game enticing, and as such it is of pivotal importance to create and maintain it to keep the player's mind off the real world while inside the confines of a game framework. According to the GameFlow theory, it is one of seven key tenets of evaluating and implementing a successful game design. Yet, certain multiplayer online games are designed in a fashion that in some cases seem to break immersion, where the player is frequently put out of action, sometimes for minutes on end. In this study, using online questionnaires, we discover that players, despite claims otherwise, seem to be in several ways affected negatively by this breaking of immersion.

<- Föregående sida 44 Nästa sida ->