Sök:

Sökresultat:

1695 Uppsatser om Building permit - Sida 19 av 113

Effektivisering av LCA med hjälp av BIM

This thesis concerns how Sweden relates to life cycle assessment (LCA) in the construction process. LCA means analyzing a products impact and the analysis includes the whole life span of the product. A building has a high complexity and the combination with its unique shape will make the LCA more comprehensive, unlike e.g. aluminum cans. Recently there has been a development of a working procedure in the construction industry.

Den oavsiktliga konsekvensen : En uppsats om integrationen av ensamkommande flyktingungdomar

This thesis in sociology was based on a qualitative research strategy. Its intention was to analyze how a specific county in the middle of Sweden work to make the integration process of the unaccompanied refugee youths, with a Swedish residence permit, as good as possible, the other intention was to find out the possible following of this work.Interviews were done and statistics were found, this later on became analyzed together with the theories. The basic theories were integration and class theory.The mainly finding in this study was that that the integration of the unaccompanied refugee children leads them into a lower society class of the Swedish community. This since these youth are more of less forced to follow some steps in the education, which for many of them will lead to that they are too old to apply to the national gymnasium in Sweden, and therefore they only get education though the introduction program, which is not leading to a graduation from the gymnasium. Because of this they are not getting the same chances to succeed with the same kind of education as youth on other programs in the Swedish gymnasium..

Visionen BIM

IT-användandet i byggbranschen har banat väg för nya, effektivare arbetssätt och det finns visioner om hur det ska fungera. Syftet med vårt examensarbete är att ta reda på byggbranschens användande av, och vision om BIM. Vad är BIM ? Building Information Model?Kort beskrivet är BIM en modell där all information för ett byggprojekts hela livscykel kan hanteras. BIM förenklar det fortlöpande arbetet genom hela byggprocessen genom att tillhandahålla information om projektet som är relevant, uppdaterad, integrerad, fullt koordinerad och av hög kvalité.

iPad på en byggarbetsplats : Det effektiva och papperslösa sättet att arbeta på

Quality assurance of construction projects and create effective ways of working, is intoday's pressed position, major objectives for building contractor companies. This thesis is an attempt to see if it is possible to achieve these goals with the new modern tool iPad.The author of this thesis has during the latter half of his one year practice work in Uppsala for the Swedish building construction company NCC Construction Sverige AB, conducted a study on the possibility of using the iPad on an construction site. This has been done with active field studies in which applications have been tested and also the supervisors receptive. The usability of the iPad has always been in focus since it is important that the applications are easy to use and easy to learn.The results of the work, as presented in this report, points at opportunities in efficiency if the iPad is introduced and used on construction site. There are many useful applications for the iPad, and with a system that can handle the synchronization between the iPad and the computer, the workflow will be streamlined significantly..

Ombyggnation av ett stall för bundna mjölkkor till boxsystem för rekryteringskvigor

To reconstruct a building is a long-term investment for farmers and it is important that people with different qualifications are involved at an early stage for making the system adapted to the animals as well the animal keeper. Therefore, ethologists who can contribute with their expertise are needed to design the system and get it to function well for the animals.A Swedish farmer who planned to rebuild her stall for tied dairy cattle to a loose-housing system for recruitment heifers for milk production asked me as an ethologist to find a system which can be fit to her existing tie-stall barn for 30 dairy cows, considering the animal needs in terms of movement, social interactions and play behaviors, and to theoretically compare the system with other systems with respect to the behaviors mentioned.The theoretical comparison between different systems was made through a scientific literature review.In agreement with the animal keeper I set out to fit a system with feeding cubicles, a system with cubicles and a system with deep straw bedding to the barn. After measurements were taken and preliminary drawings were outlined it was found that only the feeding cubicle system was possible to fit to the barn.The space provided will limit the animals to perform some playing behaviors. To decrease aggressive interactions between animals even thought a limiting area it is possible to provide partitions between resources animals compete around to prevent that more than one animal can get success to the resource at a particular place at one time. To increase the animal movement in the system the water trays were moved to the outer wall instead of kept in contact with the stalls.Although this report provides guidelines for rebuilding, other competences regarding building construction and a pre-test of the suggested building solution according to Swedish legislation are needed before the rebuilding can start.The results are directed mainly to the owner of the barn, but the literature review can be used by other cattle farmers and might bring increased understanding of the possible effects of different building solution on the animals..

Konflikten mellan bevarandekrav och tilläggsisolering : The conflict between conservation requirements and additional insulation

Sweden has formulated ambitious energy goals which signify that by year 2050 the energy usage should be halved. One of the objectives is the reduction of energy usage by 20% by year 2020 and that it should be compared to the usage of energy from 1995. In parallel with increased energy requirements for buildings the demand on housing conservation, by highlighting also buildings from the last 50 years as part of the building heritage, continues to enhance, which in theory means that there is a conflict between these.The law will never be able to point out unique buildings and PBL (planning and building act) is not especially concrete. The National Housing Board has tried to make this more concrete by the new BBR regulations though there are still an enormous variety of interpretations.This report deals with the conflict between conservation requirements and additional insulation of the building envelope and is limited to multi-residential buildings built between the years 1945 and 1975. It is the stock with the greatest energy consumption and that is where the big challenge lies.

Konsten att enas under ett varumärke : Intern varumärkesuppbyggnad på Nordiska Kompaniet

Purpose: The purpose of this study is to examine how a company with a single brand is perceived as uniform, as well as how they use internal brand building to reconcile various competing actors within one brand. Furthermore the aim is to examine how staff, through internal brand building processes, perceives and identifies themself with the values of the common brand. Method: A case study with method triangulation was conducted at Nordiska Kompaniet department store in Stockholm. Quantitative data through a questionnaire survey with employees combined with two observations. Qualitative data was given through an email interview with a responsible manager of digital channels and PR from NK AB.Theories: This study has used the following theories; Destination marketing, Corporate brand, internal branding, corporate identity, corporate culture, brand value, service brand values, brand citizenship behaviour.Conclusion: This case study of NK has shown that internal branding building in a department store is a comprehensive work, which all involved must have a unified perception and understanding of the brand, in order to successful unite under one brand.

BIM - Förvaltarens Framtid

For nearly twenty years people have been talking about Product models, but given that the building industry is so conservative, it is hard to implement new working methods. Product models are these days known as Building Information Modeling, BIM. People often say they work with BIM but they often forget the most important part, the information. A 3D model should be linked with characteristics and information. Information that can be invaluable for the facility manager.We have a vision that in the best of worlds the facility manager would be able to "walk" into the model and see what kind of installations are inside the wall or in the roof.

Stommaterial för villor - trä eller betong?

We have the tradition in Sweden to build villas and houses with a wooden framework. It has become natural for us because we have so much forest in our country. Building with wood has advantages, it is easy to process, but also disadvantages, as it is sensitive to moisture.Finland has long made use of the thermal blocks to build villas. It is a type of bricks that are a bit like a sandwich element, with a core of EPS and concrete on both sides of the core material. The concrete is hollow, so that after the walls has been bricked up you pour concrete into the hollow bricks.The issue of this report is to find out if concrete can be an alternative to wood as framework material in villas.

Modernisering av en fotbollsarena : Örjans Vall

The purpose of this study is to show the technical building requirements for modern arenas inSweden. The study will also create an understanding of how the requirements affect theSwedish football arenas which are affected by the regulations valid from 2014. As one of theSwedish football arenas there is Örjans Vall located in Halmstad. The aim of this study is todevelop alternative solutions regarding the technical problems Örjans Vall is facing 2014,when the new arena requirements for ?Svensk elitfotboll? are taken into use.

Metoder för trust : Hur praktiker arbetar för att bygga förtroende till knowledge management-system

This thesis examines how knowledge management professionals use trust as a component in the creation of knowledge management systems, and what methods they use for building trust.Adopting a grounded theory approach, interviews with 8 knowledge management professionals active in different industries served as the base for an analysis that identified trust to be the single most important common factor in the data. The concept of trust used by the informants was identified as relating to the knowledge management system itself, rather than other users, employees or groups in an organisation.Building trust, the KM-professionals mainly focused on three methods: simple solutions, system superiority, and implementation security. Using these methods, the KM-professionals seek to ensure system trust by creating opportunities for users to obtain positive experiences of using the system, and thereby generate a foundation for a trust-based relationship between the user and the system..

AUSTERS 1:61 - ett fritidshus på Gotland

A few hundred metres from the beach on Fårö, Gotland, is a small lot with pine trees, green moss and wild fl owers situated, owned by my brother and sister. Eventually they would like tobuild a summerhouse here, in close proximity to their relatives. My project is a proposal for the summerhouse at the site, within the restrictions of 61 m² building area, with focus on interior,exterior and the environment.My proposal is a house close to the surrounding nature, with reference to the the building tratition on the island and with local materials. Orientation to the sun, road and neighbours hasall infl uenced my ideas of this house and the relation between inside and outdoor living, were important in my creative work. The aim was to create a house made for the family and theirholiday lifestyle and allowed consideration for the possibility of a growing family with more children.

Energieffektivisering och solenergi i en universitetsbyggnad : Undervisningshuset och Biblioteket i Uppsala

Akademiska hus is a real estate company that specializes in providing Swedish universities with housing facilities for educational and research purposes. The company strives to reduce its use of energy by 40% between the years 2000 and 2025. The aim of this thesis is to determine which measures can be taken to reduce the need of purchased energy in a building that is used by theSwedishUniversityof Agricultural Sciences inUppsala.In order to determine the results of various changes to the building envelope and ventilation system, the building was modelled in the computer simulation program VIP-Energy. Other proposed changes to make the use of energy more efficient concerned water use and lighting. The need of purchased energy can also be reduced by producing electricity or heat on site, using solar energy.Results show that economically viable measures include upgrading windows and faucets, adjusting control systems for ventilation and lighting, and installing roof mounted solar panels for power production.

Konstruktion av efterbehandlare

The purpose of this report is to examine various roof structures that can operate in a warehouse with large spans. The building that is examined in the report is currently under construction, and the roof construction has already been selected. The selected roof system will therefore be compared with some other structures and materials that have been possible. The report will evaluate three different frame materials, two insulating barriers and two overlaying materials. Another important part in major construction projects is the roof safety.

Den mobila prefabriceringsfabriken : Ett nytt produktionskoncept

This is an investigation of a mobile prefabrication factory´s competitiveness and profitability which also will result in a suggestion for a design of the factory. The mobile prefabrication factory is an idea of a new concept for production which is meant to be used in the manufacture of slab. The main intention with this concept is that by using a fast established prefabrication factory to produce elements near the construction site, thus avoiding transport from the factory to the building site. This means not only an environmental and economic gain, but also that you can avoid risking damage the elements which often occur during transportation. The contractor is owner of the mobile prefabrication factory and can thus avoid long waiting times and cyclicality.

<- Föregående sida 19 Nästa sida ->