This thesis has been carried out at the Building and Civil Engineering Programme at Chalmers University of Technology in cooperation with NCC Technology. The study aims to investigate the optimal design of a library of standardized structural solutions for in-house multi-family buildings and what benefits it brings. Today NCC use technology platforms to improve efficiency and simplify the construction process. The platforms provide the constructors guidelines on how construction details should look like, but the details are not complete. NCC Technology started in the spring of 2013 a project to investigate what benefits there are to create a library of standardized structural solutions for the constructors, with more detailed solutions than in the platforms.

I en tid då förtroende i och för företag diskuteras flitigt ville vi se vad förtroende egentligen kan sägas vara och framförallt vilken betydelse det har för de anställda. Externt kan förtroende kopplas till bilden av företaget utåt och det väckte vår nyfikenhet för kopplingen till den interna bilden, de anställdas uppfattningar om företaget, det vill säga identitetskänslan. Såväl identitetskänsla som förtroende är centrala begrepp för organisationer idag men det finns lite forskning kring dessa begrepps relation. Vårt syfte med undersökningen har varit att skapa insikt i huruvida det finns en relation mellan identitet och förtroende. Detta gjordes dels på ett teoretiskt plan, där vi försökte konceptualisera begreppen och dess relation till varandra, och dels på ett empiriskt plan där vi undersökte dessa begrepps relation till varandra i praktiken.

2013 a decision was made that all projects at the Swedish Transport Administration shoulduse BIM (Building Information Modeling) to some extent from 2015. BIM is an approachthat allows for streamlining of projects by the use of a 3D-model created in an early stage ofthe project. The 3D-model can carry information about the facility throughout its life cyclefrom planning to management. The use of a 3D-model can help the project to detect errors inearly stages of the project when it is easy and cheap to fix the error instead of finding theerror in the construction phase when it is costly and time consuming to fix it. 3D-models alsolead to improved communication both within the project groups and with the public.

Companies show interest in agile methods, but this can be challenging since these methods to a certain degree stand against traditional project methods. If the use of agile methods increase it is of importance to clarify what mechanisms that are significant to a successful result. The aim of this study is to clarify the role of the scrum master regarding conflict management in agile groups. The goal of the study is to better prepare the ScrumMaster to be ready to help the group in a conflict situation. In this examination a qualitative method has been used where five scrum masters, active in agile projects, have been interviewed about their role in conflict management.

The purpose with this essay is to study how a micro enterprise builds a brand. This because the current situation makes it difficult to stand out from the vast amount of marketing messages available in the market without having an extensive marketing campaign. Small companies do not have the opportunity to put a lot of recourses as money into marketing as the large companies do. Neither do they afford to repair a brand failure.Brand building is a process that constantly is in progress in a company, large or small. To make this process concrete we have chosen to study the four factors; brand awareness, perceived quality, brand associations and brand loyalty.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

Investment costs for eight different type housing systems for dairy cows has been calculated in order to compare the building costs as a function of herd size, shelter type and automatization. A commercial calculation programme for building was used and complemented with prices of equipments specific for dairy cow building. Herd sizes were 120, 250 and 400 cows. The milking equipments were automatic milking system (AMS), parallel parlour with 32 stalls (2x16) and rotary parlour with 24 stalls. Shelter was either insulated equipped with automatic cable driven scrapers on solid alleys, automatic feed wagon on rails, or uninsulated with manual manure handling and a tractor driven mobile mixer wagon on a drive-through feeding table. Building cost per cow or per kg milk was calculated using an average life time and 6 % interest rate and annual milk yield is 9 500 kg/cow and year. Structure effect 3-4 % higher for an insulated structure than in an uninsulated for 400 and 120 herd respectively. This is much lower compared to what is normally argued.

Projektet har genomförts i samarbete med Lokalförvaltningen, Göteborgs Stad.Eftersom behovet av lokaler i en stad förändras över tid efterfrågas en byggnad som kan användas till flera olika ändamål under dess bruksperiod. Ombyggnation av befintliga byggnader kan bli kostsamma och tidskrävande eftersom bärande komponenter eller fasta installationer ofta måste flyttas eller bytas ut. En flexibel byggnad som redan vid uppförandet förbereds för ombyggnation kan enkelt anpassas och användas till flera olika verksamheter. Att bygga mer effektivt och flexibelt minskar kostnader och bidrar till ett mer hållbart byggande. Syftet med arbetet var att ta fram en byggnad som genom enklare omställningsarbeten i byggnadens invändiga utseende kan fungera för tre olika verksamheter.

Rapporten inleds med en beskrivning av WM-datas Network Management struktur och Reporting Management behov. Därefter följer en beskrivning av de två analys tekniker Datamining och On Line Analytical Processing (OLAP) vilka är de mest använda databasbaserade tekniker. Verktyget Tivoli Decision Support (TDS) är ett stödssystem som ska underlätta för beslutsfattare inom organisationen. TDS baseras på OLAP ? tekniken och rapporten visar avslutningsvis de möjligheter som verktyget ger avseende WM-datas Reporting Management..

Syftet med denna uppsats är att testa olika tradingmodeller inom valutahandel, byggda på tekniska indikatorer, för att undersöka om man kan nå en positiv avkastning.Undersökningen omfattar 24 olika modeller, byggda på fyra olika tekniska indikatorer och med tre olika money management strategier. Modellerna testas på fem olika valutapar under tre månaders tid. Slutsatsen är att det går att nå positiv avkastning och även positiv överavkastning med automatiska tradingmodeller om rätt indikatorer och money management strategier används. Modellernas avkastning är mer känsliga för valet av money management strategi än för valet av vilka tekniska indikatorer och parametervärden som ska användas..

The design of buildings is today considered to be crucial for obtaining sustainable development. Research concerning sustainable building is considered to be a Swedish area of strength and development projects as Hammarby Sjöstad and Bo01 are often pointed out as Swedish prime examples of sustainable building. Some still argue though, that that these projects should not be presented as sustainable, due to its incompetence to meet their objectives. This contradiction has attracted my curiosity. By doing this study I hope to gain understanding about the difficulties Bo01 and Hammarby Sjöstad are surrounded with and its significance for sustainable development.

The overall purpose of this essay is to study in which degree the democratic model that is called participant democracy works in the Swedish municipalities. To achieve what I set out to do I will focus on a central political area in which the Swedish municipalities has sovereignty versus the state, in other words in an area where they rule themselves. That political area will then represent how well the participant democracy works in the Swedish municipalities. The research questions then becomes:Does the participant democracy at Swedish Municipality level work in a satisfying way?Does the participant democracy in a large Swedish Municipality in a central political area work?Does the participant democracy in a small Swedish Municipality in a central political area work?Are there similarities and differences between the municipalities?If so, how can that be explained?To answer these questions I will study documents regarding the planning and building area.

Detta är en undersökning om EMVs hyllplatsandelar i förhållande till LMV. Finns det någon favorisering av EMV eller är det endast ett felaktigt antagande från många författare..

This thesis project is a vision of an identity building in Gothenburg, situated on the pier called Bananpiren. The purpose of the project is to create interest and stimulate discussions around the place and the building.In order to gain inspiration of what such a place can contain and express, a number of similar projects have been analysed, for example the Sydney Opera and the Yokohama International Port Terminal.A number of suggestions was then created and analysed, all of which are presented in chronological order in order to show the rejections and the developed designs that resulted in the final formation to proceed with.The result was finalised in a number of presentation images of the project that can be used by Cullbergs Arkitektkontor AB when presenting the project..

Too much attention has been given to mainstream approaches in performance management and management accounting research, without taking in to account changes in the environment with the rapid growth of online retailing. This paper evaluates how and/or if performance management differs in online contexts by using a conceptual model developed by Ferreira et al (2009). The model and its components are tested on three multichannel- and six e-commerce businesses. The result and its analysis is commented on by two e - commerce experts. The result shows that the operation method of the models twelve components do not differ in terms of work methods in online and offline contexts.