Throughout the years more and more charitable organisations have appeared and the competition between them has increased. This has forced the charities to use more marketing strategies in their work in order to strengthen their competitiveness. Research in philanthropy in terms of economy and marketing has been neglected in Sweden and the research that is done today is mainly focused on why individuals donate to charity. A donation, according to the writers of this thesis, has been seen as an economical activity and can therefore be explained and understood through economical models and theories. This thesis aims to see how a contributor to charity makes the decision to donate money, consequently see how the donation decision process actually works from a theoretical model of a buying decision process from marketing literature. The purpose of this thesis is therefore to from a buying decision process concerning products describe the donation decision process for contributors to charity. By achieving this purpose the writers aim to compare if a donation decision process go through certain steps similar to a buying decision process.

The anatomy and physiology of reptiles and mammals are in many ways different, and will therefore possibly complicate anesthetic administration. Lizards are ectothermic and one should keep in mind that a decrease in the lizard?s environmental temperature may result in reductions in anesthetic metabolism. Respiratory depression is a profound problem because lizards lack a diaphragm, making inhalation and expiration completely active processes. This, in combination with cardiac shunting and breath holding makes the effects of anesthesia unpredictable.

This report deals with issues related to construction waste. Building material that has not been built into the project is defined as construction waste. Cost of construction waste amounts to 4-12 % of the total cost of the project. Moreover, cost of construction waste is 1-3 % of the production cost. The aim of this study is to increase knowledge about the main causes of waste within the construction industry.

The use of balanced scorecards have spread explosively throughout the world during the last decade. This management tool have become very common in a vide spread variety of organisations on all continents. Many balanced scorecard fails though and scorecard theorists often blame the identification- and implementation process as they claim that these lay the foundation for the use of the tool. As my literature study shows, academic research on the area is rare. Particularly the effect on the implementation process from organisational dynamics and organisational structures needs further research.

This study investigates the succession process in family businesses and aims to enhance the understanding of the process as a whole, as well as how family businesses strategically plan for succession. The research is based on a case study of a family corporate group undergoing a transition from the fourth to the fifth generation. A qualitative research approach was employed, involving interviews with individuals from both the fourth and fifth generations, as well as external stakeholders who have influenced the process. The results show that the planning and implementation of succession are complex and that there is a certain lack of existing theory. Empirical evidence indicates that contracts and documentation are crucial for advancing the process. Inclusion of external parties is also important, not only for their expertise but also to provide an objective perspective.

The aim of this study is to show how some persons with one of the Swedish national minority languages as mother tongue use a library with regard to their mother tongue and culture. The research questions are: How do Sami-speaking, Finnish-speaking and Meänkieli-speaking (Tornedalen Finnish-speaking) persons use a library with regard to their mother tongue and their culture? What aspects do they find important in this use? As a theoretical frame I have used Marianne Andersson and Dorte Skot-Hansen?s model of the functions of the local library and Will Kymlicka?s theory of the value of maintenance of minority cultures. The study is a qualitative user study. Deep interviews have been conducted with 9 persons with Finnish, Meänkieli or Sami as mother tongue.The results show that the main use of the library is as a cultural centre and the most frequently used service is borrowing of literature.

This project has been created with the assistance of Fredells. Fredells is a Stockholm based company with a focus on the retail of building products. Fredells also produces prefab- or prefabricated products which are either completely or partially ready for assembly the moment they arrive to the building site. These prefab-products are primarily delivered to customers within the Stockholm region. The building industry is a conservative market where the incentive to changes has been relatively low compared to other industries.

This project was led on behalf of Bombardier Transportation in Västerås, Sweden, incollaboration with KTH Stockholm and EPFL Lausanne. This project is connected to thedevelopment of a new and simplified tilt system for rail vehicles.Growing competition from other means of transportation has forced railway companiesthroughout the world to search for increased performances.Travelling time is the mostobvious performance indicator that may be improved by introducing high-speed trains.They require very large curve radii and long transitions curves not to impairridecomfort, another performance indicator. Building new tracks adapted to high speedtrains is very costly and can only be justified where the passenger base is large.Trains with the capability to tilt the carbodies inwards the curve is a more cost efficientalternative. The tilt inwards reduces thelateral force felt by the passengers allowing thetrain to pass curves at enhanced speed with maintained ride comfort but increases thefrequency ofmotion sickness.The benefits of tilting trains are improved speed capability in curves and enhancedpassengers comfort, but at higher buying and maintenance cost. As the conventionaltrains increase their speed in curves, the performance advantage of tilting trains isreduced while their prize is still kept significantly higher and constant.

One of the most common ways to produce heat and electricity in Europe today is by the incineration of waste or combustion of coal. These materials can be very sulfurous and during combustion sulfur dioxide is produced. This is an environmental and health related toxic substance which is why power plants have strict regulations on removing it from the flue gas. Sulfur dioxide is removed from the flue gas by adding a limestone reagent. The sulfur dioxide reacts with the limestone and the synthetic product obtained is ?Flue Gas Desulfurization gypsum?.

Title Becoming involved in the planning process - from the construction workers perspective.University/Institution Halmstad UniversityKeywordsEmpowerment through participation, construction workers involvement in decision making in the planning process, knowledge management and communication in the planning process, partnering, human resource managementAimThe aim of this bachelor thesis is to provide knowledge and examine how construction workers perceive involvement in the planning process of partnering projects, what they can contribute and what they get out of the planning process.Methodology The study was conducted with a qualitative approach in the form of semi-structured interviews.          The interview studie consist of 10 interviews with construction workers who are specially educated in participating in the planning process at the company ByggDialog AB.ConclusionAll respondents are positive to be involved in the planning process. The main advantages they can see is that they are able to influence technical solutions and methods that will be used later on in the production. Therefore it is important to consider when construction workers should be involved in the planning process so that they get the chance to influence in this decisions.When it comes to the decision making the construction workers should be involved in the decisions that are related to their tasks in the production such as technical solutions, choice of methods and materials. Their main duties and working hours should be in the production.Involvement in planning does not automatically mean that the construction workers are involved in the decision making, it is up to them how much they participate.

This report is written on commission by WSP Acoustics. The report studies the outdoor sound levels on school yards in Stockholm. The questions given by the company to be answered was what are the actual sound levels at diffrent school yards with low traffic noise and how can you construct a facade element that reduces the sound level from the outside and meet the indoor requirements. Mesurements for four hours was done at eight schools set north and south of the city centre. The measurement period included one school break and one lunch break.

The students participating in my development work will work with a process book for handicraft studies. In the beginning of their studies, the students need practical knowledge about the development of the profession itself, but they also need to be challenged and learn how to solve problems on their own which will help them gain a deeper knowledge of the subject.    I focus on open questions to create a process with the students. This process is created when working with Solution-Focused-Education. Through ?assessment for learning? we can help the students to improve their self-assessment and understanding of the learning process.

This report's aim is that by field measurements determine the function of Aprobo soundproofing material dB2 for reducing impact sounds, the measurements is done in ?the school for fine art? in Umeå also known as ?konstnärligt campus building nine?. The construction technique is used in areas sensitive to impact sound between different floors in the building. The measurement?s is also to do a function control of the buildings sound quality compared to Swedish and European standard when it comes to air sound, impact sound and reverberation time .

The aim of this study is to describe and analyse the creation and the design of a new public library. In order to concretize this, the study sets out from two examples, the public libraries in Simrishamn and Landskrona. The material used to attain the purpose of the study consists partly of interviews, partly of literature on the subject. To be able to put these two libraries in their historical context, the essay also provides a short overview of the development of public library buildings in Sweden during the 20th century. Another aspect that is discussed is the actual procedure of planning a public library from scratch.

This Bachelor of Science thesis was carried out at Metso Panelboard AB, located in Sundsvall, Sweden. The work lasted for 10 weeks and began at the end of February 2007. Metso Panelboard is one of the leading suppliers of complete lines, single machines, engineering knowledge and after-market services to the fibreboard industries. The task involved building a 3D-model of a dryer cyclone in the CAD-program Pro/ENGINEER. A dryer cyclone is the part where the tree fibres are dried in the process of manufacturing fibreboards. Currently, it takes about two weeks to draw a dryer cyclone. By creating a 3D-model of it, which should have the functionality to be generated to different sizes, the goal is to decrease the drawing time to about 20 hours and to increase the quality of the work. This report includes the fundamental theories behind the manufacturing of fibreboards with focus on the dryer cyclone.