Sök:

Sökresultat:

9839 Uppsatser om Building maintenance process - Sida 26 av 656

Från plats till resmål : Etableringsprocessen

In this thesis we have examined why the establishment process of travel destination is essential for the tour operators and how the process can be influenced by different conditions. The thesis is written from the perspective of the tour operators and with the tour operator Ving as our case study, we have been able to create a picture of how the establishment process of travel destination may look like.We have chosen to deal with some different areas in this thesis that all are important for the creation of a holistic picture of the process. The overall segments listed in this thesis are the process itself, the tourist, marketing, the product creation and demand. By connecting our theoretical framework to the collected empirical data from our case study, we have analyzed the establishment process and drawn our conclusions..

Fuktens påverkan på utegipsskivor under byggtiden

This thesis is a study of humidity at Knauf Danogips external plasterboard. The study is performed at the building project Kv. Maskinen in Jönköping in cooperation with NCC Construction AB and Knauf Danogips. The measuring was performed during five winter/spring months to see how the weather influenced the plasterboard.The measuring was performed at a small two-storied building and a larger fourstoried building. From the buildings` placement were a couple of measuring dots selected and to get a good result was the dots located in the four cardinal points.

 En jämförelsestudie av koldioxidsläpp för en byggnad med trä- respektive betongstomme ur ett livscykelperspektiv

The goal with this examination thesis is to investigate the difference in carbon dioxide emissions between a building with a wooden versus concrete carcassing from a life cycle perspective. The huge amounts of carbon dioxide released into air from human activities must be reduced to prevent serious consequences. A way to limit this issue is through performing a comparative study where the result shows which of two products with the same function has the lowest emission of carbon dioxide, whereof the product with the lowest carbon dioxide pollution can be chosen.To be able to perform a study like this an object has been chosen and studies about life cycle analyses have been done. The rental square meter, the thermal conductivity value, the energy requirements and the placement of the building has been set equal in both framework types. There were solely dissimilarities of the two buildings taken into account when this comparison study was performed.The result of the study is that a building constructed with a wooden carcassing has the lowest amount of carbon dioxide emissions.

Program- och projekterings anatomi ? en studie av byggprogrammets program- och projekteringsskede

Program- och projekterings anatomi? en studie av byggprogrammets program- och projekteringsskedeStudien belyser och lyfter upp byggnadsprocessens, idag kanske viktigaste fråga, nämligen industrialiseringen av byggprocessen och de möjligheter som följer med det nya sättet att föra en byggprocess. Studien omfattar program- och projekteringsskedet och dess syfte är med andra ord ett försök att skapa en mer förädlad byggprocess, att kunna identifiera olika störningsmoment under dessa två skeden, samt att minimera och om möjligt eliminera störningsmomenten i dessa med hjälp av fungerande informationsteknik.I samarbete med Peab i Helsingborg har vi gjort en enkätundersökning på två referensobjekt, Polishuset samt Tingshuset, utifrån vilken vi tagit reda på vilken ställning de olika aktörerna har gentemot byggprocessen och varandra, samt var, varför och vilka störningsmoment som uppstod i byggprocessen.Resultatet visade närmast likadana faktorer hos de olika aktörerna och exempel på detta är att:? hälften av aktörerna önskar bli inkopplade i ett tidigare skede av processen? det uppstod störningsmoment mellan de olika aktörerna? störningsmomenten orsakades oftast av dålig planering och tidsbrist? utveckling/förbättring borde göras inom kommunikationen mellan parterna och inom informationsteknologinVidare beskriver studien utformningen av standardiserade byggsystem och tekniskt plattformstänkande samt montagebyggande med högförädlade komponenter, där vi kom fram att Peab har långsiktiga planer och att företaget inom en kort framtid kommer att vara ledande inom området.Studien sammanfattar slutligen de faktorer som tros behövas för att en industriell byggprocess skall lyckas i framtiden..

Energieffektivisering av fastighet från 1930-talet : Utredning av energianvändningen och energieffektiviseringsåtgärder för Tången 2

Tången 2 is a building situated in Stockholm, Sweden. It´s built in the 1930s and contains both residences and businesses. The property owner, Diligentia AB, wants to lower the energy use in Tången 2. This report consists of an energy audit which clarifies the specific circumstances linked to Tången 2. Collected knowledge is then used, together with the results from the literature study, to decide energy measures to proceed with.

Dimensionering och konstruktion av Villa X

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

Kyrkan som immateriellt kulturarv En studie i kulturvårdens förhållningssätt till liturgiska värden

This master thesis aims to examine the methods of the conservation field and their visionabout maintenance and change, in terms of liturgical values. This is to be able todetermine if there is a need to develop the methods that the field of conservation has tosafeguard the intangible cultural heritage of the churches.This is mainly a literature review, focusing on different tutorials from the Swedish nationalheritage board, and different texts on liturgy aswell as Unesco's Convention for theSafeguarding of intagible Heritage (2003), ratified in Sweden in January 2011. A casestudy of the practical work has been carried out on three churches that have undergonechange. The application process and the results were important for this study.The conclusion is that the conservation field have ambitions to preserve the liturgicalvalues, but they do not have sufficiently developed methods to do so. Nevertheless, itappears that most cases of change in churches, increases the liturgical values..

Lägenhetsskiljande massivträbjälklag Projektering av bjälklag med förbättrade ljudisolerande egenskaper

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

A-måttet - En slitageanalys på spårvägsrälsen i Göteborg

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

Lågenergihus : Att bygga energisnålt

A large proportion of the energy consumption is in the building industry and a large part goes to heating our homes and premises. In the developing countries' development now threatens the large consumption of energy in our earth's climate. It is in the West world that we must be good role models in terms of energy efficiency. One solution to reduce energy consumption for heating of buildings may be to continue to build low energy houses and passive houses, but it is also about rebuilding the buildings that currently have high energy consumption such as the old Million program Houses. These buildings will be standing many years and their energy consumption will not diminish over time by itself and energy prices will certainly not diminish in the future.

Vägförvaltningssystem. Sammanställning i databas av system från Vägverket och kommunerna i Sverige

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

Utveckling Ulricehamn- om stora förändringar i en liten stad :

The purpose of this thesis is to inquire how a small town can be affected by some planned changes in the physical structure of the town, and how its inhabitants can benefit from those major changes. The town in question is Ulricehamn, and of the four projects considered, two concerns infrastructure. A new railway and a new locality for the major road, today passing through Ulricehamn. The other two projects are run by the local authorities, that is the planning of a modern town park by the lake, and a new public building for cultural purposes. There are no guarantees that any of the four projects will ever be realized, but in the process with this work, they have been considered as already a fact.

Lönsamheten vid nystart av slaktsvinsproduktion : en fallstudie

I have done a case-study about building a new stable for slaughter pigs at a farm close to Kalmar. The farm is able to supply the breeding with cereals and it has enough area to spread the manure on. The most important factors to gain profit, is the cost for building the stable, the price of the feeding-stuff and the growth of the pigs. The discount from the slaughter-house was less important than I thought from the beginning, and it?s a factor that is hard to influence. With the new production of slaughter-pig and cattle that already exist on the farm, the farm will get a well-functioned rotation of crops with lye and autumn rape as interruption-crop.

Hållbarhetscertifiering av stadsdelar : En jämförelse mellan existerande certifieringssystem

This bachelor thesis describes the process of developing a two wheeled robot with activebalancing. The robot is designed to go straight ahead until it reaches a finish line. Then it shallstop to stand still balancing. The workload in the group has been divided according to theprevious individual projects, which are attached. The design of the robot is inspired by theconcept of the Segway.

Utveckling av stol för café och lunchrum

This is a dissertation for a Bachelor Degree Project at the University of Skövde. The project is carried out in cooperation with the company Kinnarps AB.The objective of this project was to develop a new chair for café and lunch rooms, which should satisfy the markets expectations and demands and match Kinnarps AB?s assortment today. The project has contained everything from identification of user and customer needs and requirements to evaluation and building of a prototype.The result is a chair with a frame of tubular steel and there is nothing like it in Kinnarps AB?s assortment today.

<- Föregående sida 26 Nästa sida ->