The most dominating channel for communication, connecting companies and customers, during the 1900 century was those who included either physical contact or phone contact. However, when Internet started to make its way as a channel for communication, a whole new opportunity opened up for the companies. Since then Internet has grown to be an important part for any company that wants to gain market shares. One of those markets is the market of travelling.This paper discusses the Swedish industry of travelling, and different travel organizers use of Internet as a mediate for long-term relationships. The paper is built on a comparison between three companies that all distributes journeys, this is to examine the Internet communications effect on the electronic relationship (e-relation) with customers.Three travel organizers with similar visions and objectives are compared in this paper, these are Apollo, Fritidsresor and Ving.

The aim of this report was to investigate the economy of passive houses. The work was focused on economy in total and on the economy of different components such as windows, insulation, heat exchanger and the air tightness of the climate shell. No attention was paid on the comfort factor or to the impacts on the environment.Two houses, aspiring to be passive were chosen; A big one and a small one. Hence, comparisons considering the size of the building have been possible to do as well.The comparisons were made by calculating ?break even? between two concepts; passive and BBR- concept.

Förslag på hur Arkitekturskolan kan ritas och programmeras om för att bli en offentlig byggnad i staden som ger mycket tillbaka till Stockholms invånare. Form och program är utformat att ge alla som befinner sig i och utanför byggnaden en ny syn på staden där inte bara gatuplan är offentligt och takplan är privat. Runt byggnaden slingras sig en offentlig promenad som leder upp till det öppna takplanet med bra utsikt över staden. Byggnaden har delats upp för att skapa torg på plan 2. GA är en offentlig plats likt en galleria 2.0..

The Swedish automotive industry has since way back been struggling with bankruptcy, abroad buy outs and staff cuts. Competition and pressure on prices are two factors that affect the automotive industry. Because of this, the companies are pressured to continuously developing their work in addition to be able to compete on the market. The aircraft industry has successfully managed to implement additive manufacturing (AM) and for motorsport has several components manufactured with AM been used. When AM is used as a manufacturing method, there are a number of advantagesthat follows.

In the EU there are EC Directives that Member States of EU should follow. Sweden has undertaken to transpose EC Directives regarding the working environment to Swedish Provisions.  In 4 April 2006, the European Commission had some criticism against the Swedish implementation of the Construction Sites Directive. The Swedish Work Environment Authority has in response to this criticism reworked the Work Environment Act and related provision about building and civil engineering work. The changes came into force 1 January 2009.These changes have resulted in some working methods and even new responsibility subjects must be reviewed. The purpose of this exam project was to investigate if contractors and clients in the construction sector, had have time to update themselves on this front and adapt to these changes.

Corporate Social Responsibility (CSR) is a topic that is becoming increasingly important in today's society. CSR is a concept whereby companies voluntarily integrate social and environmental concerns both in their business but also in interaction with their stakeholders. The society of today sets high expectations for how companies take their social responsibilities, especially in industries where the risks to individuals and the environment are high. In this study, we tried to answer the following questions; what kind of responsibility do companies in the plastics and chemicals industry claim to take and why might this be due? What differences exist between the investigated companies in the industry and what may these differences be rooted in? The purpose of this study was to obtain an understanding of the interest in working on sustainability in the plastics and chemicals industry.

Since a few years back television has been on a verge of an enormous digital change. Web-TV is now growing at an incredible rate and is said to completely change the way we consume TV. The purpose of this essay is to determine and gain an understanding of how representatives of the broadcast industry looks at the phenomenon of web-TV and especially the different kinds of online video services and how they believe this will affect the television. Methods used are qualitative interviews which we compared with previous studies on the subject and acknowledged communication theories. The respondents were people with good insight and understanding of the media and TV industry.

This paper aims to analyze the legal functions and characteristics of bills of lading in their basic form to examine the legal framework for the adoption of electronic bills of lading under Swedish law. With a comparative analysis against English law, particular attention is given to the 'document of title' function. This has been claimed to pose challenges in the transition to electronic bills of lading. While Swedish law presents potential parallels, critical aspects like negotiability and indirect possession require resolution. It analyzes international regulations such as the Rotterdam Rules and Model Law, addressing challenges and potential solutions for digitalization.

In this paper the possibilities to replace metal with plastic in products for the Building industry were looked into. The first part was a market examination where several suitable products were found. After evaluation the door latch for in-house doors was selected to be re-designed to better suit the properties of plastic.New types of mechanisms were designed with different functions that use the benefits of plastic materials. Models of these mechanisms were developed to evaluate their function. The components in the different mechanisms were adapted for manufacturing with injection moulding.To confirm that the plastic material could handle the appearing stresses calculations on the most vulnerable parts were carried out.

Sudan has always showed great potential in the poultry industry, but it has not been until now that this potential has blossomed and is growing quickly. As large agribusinesses1are taking over the market shares within the urban areas, smallholders2 have been put out of business. They are not able to compete with mass production and lack financial assets to improve their production techniques. Contract farming is defined as initiatives from agro industrial companies to secure access to smallholder produce and has in developing countries become a way of allowing the poor to participate in a larger market (Farrington, 1999). The aim with this study was to investigate the suitability of implementing the contract farming concept within the poultry industry in Sudan today. The study is a qualitative field study and the authors have conducted qualitative interviews with respondents involved in the poultry industry in Sudan.

This report will show the energy usage of Hotel Princess in Sandviken, Sweden. When the hotel changed owner an examination of the hotels heating, ventilation and sanitary systems were done. The report showed flaws in the ventilation system, and is why the new owner wanted a closer look at the energy use of the hotel. The original building was built in the 1930s and two major extensions have been built, one in the 1950s and the most recent in the 1980s. An assumption made is that the building parts were built to the restrictions during the time. Activities on the hotel include sleep over, conference, night club, massage and swimming in the hotels pool section.

Background: The standard of living should be the same for everyone, whether the apartment is placed in an old or new building. The residential properties that were built from 1965 until 1974 is now beginning to become old and in need of restoration. The financial crisis during the nineties contributed to the lack of maintenance on the buildings in Sweden. As the public buildings gets older more and more defects occurs. The coordination and maintenance will therefore have a more significant role in the housing company ?s work.The increasing interest about how old a building can be, attract much attention.

Building with volume element is relatively new and has started to increase more and more. The regulations that exist to regulate and determine how the transports of volume elements are to be conducted are diffuse and not very well adjusted to address the issues with transporting volume elements. Today there are a number of instances that a company has to turn to in order to get a somewhat different view, what regulations say and interpret it in order to know what applies and not applies regarding the transportation of volume elements. regulations. The rules that are in place make it tough for the volume element producing companies to develop and continue to be active on the market.

Problem: The relations between first and second tier suppliers within the automotive industry have changed drastically during recent years. Previously involving the supply of simple components, today the relation involves collaborative product development of complex subsystems. The situation is rather new for the actors, hence there are a number of problems that act as restraints for the collaboration. In order to come to terms with these problems, it is important to determine the underlying causes. Purpose: The purpose of this thesis is to make a survey of the main problems in the collaborative product development between first and second tier suppliers within the Swedish automotive industry.

European Union has made a new decision that all new built houses by 2020 shallbe near-zero energy houses. Boverket?s definition of near-zero energy housesintends buildings with good energy performance in which a proportion of theamount of energy that must be added to the building is made of renewable energy.Passive House is a set of requirements from FEBY designed to build energyefficient buildings. This is achieved by reducing loss of heat through the buildingenvelope and to take advantage of the passive heat from solar radiation,installation and heat sources like people living in the house.This project has been made with help of Anebyhus and one of their model houseshave been examined from the report?s issues, including Anebyhus?s energyperformance, requirements for the manufacturing and assembly, how theenvelope must be improved to fulfill the requirements for the Passive House andwhat energy calculation programs are available on the market.The report aims to provide solutions for energy efficient houses that are adaptedfor production of house building.Two visits to Anebyhus has been done to study their manufacture and assemblyof building elements.