This diploma work was performed because the company Sveriges BostadsrättsCentrum, with the abbreviation SBC, had a need to gain insight into how changes in the Work Environment Act and related regulations which took effect January 1, 2009 affecting their work with the work environment. The changes mean that the client may hand over his work environment responsibilities to a contractor and that he has to select so-called building work environment co-ordinators. At SBC they are working as representatives for tenant-owner's association when a construction is about to be carried out. The purpose was to ascertain how changes may affect the work at SBC. The diploma work intends to educate the staff at SBC how work with the work environment would look like if they met the regulatory requirements.

When constructing a building, a number of aspects must be harmonized in order for it to fulfill requirements ? a building must fulfill requirements such a load-bearing, conservation of energy and a good indoor environment by means of, among other things, moisture proofing .Moisture problems in buildings can affect health negatively. As we are increasingly staying in indoors, demands on a good indoor environment are higher.This work starts with examining moisture problems in slab-on-ground solutions, and then links the various scenarios to moisture problems in a concrete slab of a real building. The building with moisture problems is located in Årby by in Borlänge and moisture damage was found in the slab at an apartment adjoining wall.By reviewing literature written within the field of moisture problem, making hand calculations and modeling in the program Comsol Multiphysics, judgments are made to find explanations as to why the rise of moisture occurred in the building in Årby by.Generally, the following guidelines may be used to reduce the risk of moisture problems in slab-on-ground constructions:Drying of construction moisture before laying the floor material.Using draining layer beneath the slab, to prevent capillary suction.Using insulation under the slab, partly for comfort and to establish the temperature difference between the ground and the concrete slab.Avoid direct contact between the wood and concrete, due to degradation and fouling smells that normally occurs.If necessary, use additional vapor barrier.In addition to the above, there are various methods for moisture-proof and moisture-monitoring by design or by the method ByggaF suited for the entire construction process various events..

This thesis aims to increase understanding and knowledge of issues affecting the redevelopment of older office buildings to housing. The rising demand for housing in recent years has resulted in a need and an increase in cost housing projects. The need has led property owners wanting to build old office buildings to apartments. The case study is carried out in Lycksele town and in close contact with consultancy TM (Technician Mercantile) ? consulting, which has operations in the area.

Lack of political interest and will to deal with human rights violations carried out under the civil- military dictatorship, has characterized the transition and post-transition in Uruguay. The systematic use of torture, arbitrary imprisonments and forced disappearances in the relatively small country created a culture of fear that has been present through out the post-transition phase. Human rights groups have been central actors in the fight for truth and justice and against impunity. This study analyzes how these groups multiple democracy-building functions have contributed to democratic development. It also analyses how the democracy-building functions have been constrained by the political context.

By using industrialized building, pre-installed modules can be delivered to the construction site where they are easily mounted. This method has many advantages compared to on-site manufacturing, for example, the precision during the production process should be much higher than building each wall and floor on site. Furthermore, the quick erection procedure when using prefabricated elements and the possibility to use weather protection has the advantage of not being dependent on weather conditions, and many other factors.Masonite Beams AB is a Swedish company (a member of the Norwegian company, Byggma ASA) with a relatively new technology using light weight beams as bearing elements in the walls and a certain stiff board lamella slap which is mounted on the top of the floor structure creating an integrated stiff beam / board floor structure. The elements are flat which make it much easier to transport the elements from the factory to the building site where the building parts are easily mounted with special mounting stud.One of the main drawbacks of lightweight structure is the sound transmission. The main topic is low frequency annoyance, however the complex structural elements and their mutual sensitive connections other acoustical problems might appear.

Sustainability Reporting has emerged and transformed over the past decades as a voluntary practice by companies across industries that desire to show proof of good conduct and environmental; social; and economic responsibility. As industrial food production is one of the largest contributors to contemporary environmental problems, it might be expected that reporting within the industry would be both well established and well understood. Unfortunately, it is neither. In light of the food industry?s considerable environmental impact and the growing popularity of plant-based food as a more sustainable alternative to dairy products, this paper assesses and briefly discusses the Sustainability Reporting of two companies in the plant-based food and beverage industry. The research was designed to compare the practices of Europe-based Alpro and US-based SoDelicious, and this study has two major purposes: to describe the reporting of the case companies and to subsequently compare their practices to the other as well as to global reporting standards. The empirical study in this paper was conducted through content analysis.

AbstractTitle: An industry with a lacking trust ? PR-consultants about their own responsibility and how they can contribute to an increased trust for their profession (En bransch med bristande förtroende ? PR-konsulter om sitt eget ansvar och hur de själva kan bidra till ökat branschförtroende)Number of pages: 68 (79 including enclosures)Author: Ebba GöranzonTutor: Göran SvenssonCourse: Media and Communication Studies DPeriod: Spring 2008University: Division of Media and Communication, Department of Information Science, Uppsala UniversityAim: The aim of this essay is to study the Swedish PR-industry and the distrust that is directed towards it. The starting point is different PR-consultants opinion about their profession and industry. What do they think needs to be done to increase the trust for the industry and what kind of responsibility do they think they have?Method/Material: Together with literature studies, a qualitative method has been used and five in-depth interviews with PR-consultants have been conducted.

There are many factors in a building project that has to collaborate with one another in order to reach the desired end result, how you work with moisture issues in timber is a very important one. While constructing Varbergs Hospital, the building company Skanska came in contact with the issue of extra high demands on the moisture content in timber. What they requested from us was a moisture program in which you clearly could follow the routines regarding work with moisture in timber. The aim is to use this program as a help during the work, in order to achieve a good result.We have developed this study in addition to the moisture program. The aim is that this study will give you a deeper understanding of the important factors to consider.

In Sweden there are 299 000 working in the construction industry. The construction industry is one of the industries where most accidents occur every year. During the last ten years there have been 111 death accidents in the construction industry and 48 of them were falling accidents. That means, in average, one death accident every month.Falling accidents gives serious injuries to the persons who are affected by them. It is anticipated that this report will investigate the factors beyond the falling accidents and also to present proposals that can decrease the number of falling accidents in the future.To secure a healthy and safe construction site it is of great importance that both the employers and the employees cooperate towards the same goal.

I denna rapport presenteras ett existerande system som kan hantera paketerade program (?building blocks?) modulärt. Systemet tillämpas på produkten iipax. Ett building block är en enhet (?plugin?) som kan förflyttas mellan iipax-projekt.

AbstractDelta Terminal owns an outdated industrial building which they now rent out to businesses. This property currently has a high energy con-sumption and therfore it is desirable to improve the efficiency. In ordet to reduce the energy consumption within the industrial building enve-lope, the heating systems and lighting are being investegated. A good building envelope emits less heat and thus reduces the energy consump-tion. An energy audit is a tool used to determine the energy loss.

AbstractThis thesis is a qualitative study that provides an insight into the Nordic offshore market, focusing on the North Sea and investigates indications of how the near future may develop in the area and how these developments may affect the Nordic seafarers. Questions central to the work are aimed primarily at how shipping companies, agencies and seafarers active in the offshore industry look at future activity in the North Sea, Nordic seafarers' status in the global labor market, and how today's employment conditions look like for seafarers in the global offshore industry. The majority of the information was collected through interviewes and questionnaires. The purpose of this study was to examine whether and how the expected development in the North Sea, in terms of availability of oil and gas, may have effect on the Scandinavian seafarers' future work prospects and employment conditions in the global offshore labor. The conclusions that have been drawn are that competition among seafarers in the offshore industry is higher 2015 than previous years (2000-2014) and are expected to increase.

The competition between brands on a market has led to a differentiation of the product range and the brands shape is more and more important to take consideration to. As a company and as a leader, you must understand the importance of working with a brand building-process int he organization. It is important to take advantage of the core assets you have with the brand and also within the organization.The paper is presenting David Aakers brand building-process witch involves a model for identity and the seed within. Aaker describes that a clear brand identity can help communicate both intern the organization and out to extern costumers, it could help bring clarity to what the brand stands for. And what it wan to send out.

This thesis concerns an energy audit of a food industry. The company's business consists of boiling and peeling shrimps, and producing mayonnaise-based salads. This type of work involves energy-intensive processes, such as steam generation, compression of air and refrigeration of large spaces. These needs are supplied with electricity. Furthermore, the industry is a major consumer of district heating, particularly for heating the supply air in the ventilation system.

At the plant of Sandvik do Brasil in São Paulo there is a need for improving the transport of inserts between the plant building and the stock building. The idea is to install a system with an Automated Guided Vehicle (AGV) to take care of this transportation. The purpose of this report is to present which demands there are on the system and to find the best solution according to the demands.To conclude this work a study was made of the plant and the AGV technology was examined. Several providers of AGV solutions were contacted to get information about prices and detailed solutions.The conclusion was that the most suitable system for this application is a small unit load vehicle using inductive wire as guiding system..