Sök:

Sökresultat:

2505 Uppsatser om Building examination - Sida 13 av 167

Identifiering av parametrar för tillståndsbedömning av en vattenkraftstation

The report begins with a general inventory of possible technical faults in a hydropower plant and of possible fault indicating measurements. Then an investigation is made concerning a few different faults. Based on this investigation a choice on seal box condition and water leakage is made as problem for a more thorough examination, in which it is concluded that the turbine water leakage is larger when the turbine is put into operation. The examination ultimately results in a computer alarm for faults related to the seal box. Finally a few things are mentioned about flow measurement and pressure measurement in relation to the project as a whole..

Ljudisolering - Teknisk felsökning och kvalitetssäkring av lätta bygg-system

By using industrialized building, pre-installed modules can be delivered to the construction site where they are easily mounted. This method has many advantages compared to on-site manufacturing, for example, the precision during the production process should be much higher than building each wall and floor on site. Furthermore, the quick erection procedure when using prefabricated elements and the possibility to use weather protection has the advantage of not being dependent on weather conditions, and many other factors.Masonite Beams AB is a Swedish company (a member of the Norwegian company, Byggma ASA) with a relatively new technology using light weight beams as bearing elements in the walls and a certain stiff board lamella slap which is mounted on the top of the floor structure creating an integrated stiff beam / board floor structure. The elements are flat which make it much easier to transport the elements from the factory to the building site where the building parts are easily mounted with special mounting stud.One of the main drawbacks of lightweight structure is the sound transmission. The main topic is low frequency annoyance, however the complex structural elements and their mutual sensitive connections other acoustical problems might appear.

Hallbyggnadsteknik - en effektivisering av småhusproduktion

Syftet med det här examensarbetet är att undersöka om det är möjligt att överföra hallbyggnadsteknik till produktion av småhus för att sänka produktionskostnaderna. Studien visar att hallbyggnadsteknik enkelt går att överföra till en villa. Dessutom blir det billigare att bygga klimatskalet med vårt byggsystem jämfört med ett traditionellt prefabricerat småhus. Genom detta system kan den totala byggkostnaden för villan i jämförelsen sänkas med 3-10 % beroende på vilket fasadmaterial som väljs..

Kvalitetssäkring vid arbete med fukt i virke

There are many factors in a building project that has to collaborate with one another in order to reach the desired end result, how you work with moisture issues in timber is a very important one. While constructing Varbergs Hospital, the building company Skanska came in contact with the issue of extra high demands on the moisture content in timber. What they requested from us was a moisture program in which you clearly could follow the routines regarding work with moisture in timber. The aim is to use this program as a help during the work, in order to achieve a good result.We have developed this study in addition to the moisture program. The aim is that this study will give you a deeper understanding of the important factors to consider.

Ett modulärt pluginramverk

I denna rapport presenteras ett existerande system som kan hantera paketerade program (?building blocks?) modulärt. Systemet tillämpas på produkten iipax. Ett building block är en enhet (?plugin?) som kan förflyttas mellan iipax-projekt.

Effektivisering : En utredning om åtgärder på en industrifastighet

AbstractDelta Terminal owns an outdated industrial building which they now rent out to businesses. This property currently has a high energy con-sumption and therfore it is desirable to improve the efficiency. In ordet to reduce the energy consumption within the industrial building enve-lope, the heating systems and lighting are being investegated. A good building envelope emits less heat and thus reduces the energy consump-tion. An energy audit is a tool used to determine the energy loss.

Ledande varumärke : Finns det det ett samband mellan ledarens agerande i företaget och varumärkets styrka?

The competition between brands on a market has led to a differentiation of the product range and the brands shape is more and more important to take consideration to. As a company and as a leader, you must understand the importance of working with a brand building-process int he organization. It is important to take advantage of the core assets you have with the brand and also within the organization.The paper is presenting David Aakers brand building-process witch involves a model for identity and the seed within. Aaker describes that a clear brand identity can help communicate both intern the organization and out to extern costumers, it could help bring clarity to what the brand stands for. And what it wan to send out.

Självgående fordon hos Sandvik do Brasil

At the plant of Sandvik do Brasil in São Paulo there is a need for improving the transport of inserts between the plant building and the stock building. The idea is to install a system with an Automated Guided Vehicle (AGV) to take care of this transportation. The purpose of this report is to present which demands there are on the system and to find the best solution according to the demands.To conclude this work a study was made of the plant and the AGV technology was examined. Several providers of AGV solutions were contacted to get information about prices and detailed solutions.The conclusion was that the most suitable system for this application is a small unit load vehicle using inductive wire as guiding system..

Metallersättning inom byggbranschen

In this paper the possibilities to replace metal with plastic in products for the building industry were looked into. The first part was a market examination where several suitable products were found. After evaluation the door latch for in-house doors was selected to be re-designed to better suit the properties of plastic.New types of mechanisms were designed with different functions that use the benefits of plastic materials. Models of these mechanisms were developed to evaluate their function. The components in the different mechanisms were adapted for manufacturing with injection moulding.To confirm that the plastic material could handle the appearing stresses calculations on the most vulnerable parts were carried out.

Dagsljusdesign för en god visuell miljö

During our education to become lighting designers at Jönköping University, the artificial lighting has been in focus. Therefore we wanted to learn more about daylight. We chose to do this from a visual approach in open plan offices. Since daylight is part of the architects´ responsibility to master, we wanted to examine what architects think of when they plan daylight environments in open plan offices and how this is expressed in the buildings with focus on the visual factors.Our questions at issue are:What knowledge do architects have concerning daylight planning, and how do they use this knowledge in their practice?How well do the chosen daylight environments meet the end-users need of a good visual environment? The study consists of three case studies, carried out in the same way.

SANNINGENS ÖGONBLICK En komparativ undersökning av ett stadsbiblioteks och en byggvaruhandels arbete med att möta sina besökare

The purpose of this thesis is to discuss how a Swedish public library approaches their costumers. I will show how a library interacts with their costumers compared to a business, which has a different economic work frame, a building materials supplier. My aim is to pinpoint differences and explore new methods for the library in order to improve their service.The theoretical frame of the thesis is based on Richard Norman's notion the Moment of truth. The moment of truth is the moment when a business has to convince their customer that they offer both the product, proficiency and service that the customer needs. Service encounters at two organizations have been observed and their differences and similarities compared.

Utredning av grundavlopp på broar

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

Framtidens gymnasieskola - En styrning utifrån ett modernistiskt eller senmodernistiskt perspektiv?

This empirical work and base has been to analyze the new high school reform that the Swedish government introduced as a statement 2008/09:199 about: Higher demand and quality within the high school. This statement became legal through the government vote in spring 2010. But above all it is the investigation (SOU 2008:27) that is the central piece for these new examination changes for high school students that will come into effect 1 of July 2011. The purpose and questions asked in this analyze has been if the reform takes its base in a modernistic (traditional) way or a late modern scientific perspective. And also to find out how these new quality amendments in the investigation makes visible about the high school and what the purpose are about the changes. When scientific theories in these analyze is placed against the reform, the result shows that the modernization process reflects more of a late modern aspect, which constantly reappraise in a changeable society.

Utvärdering av byggsektorns miljöbedömningssystem BASTA

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

Att lära av varandra? : En undersökning om arbetslag utifrån ett lärarperspektiv

The purpose of this study is from a teacher?s perspective to examine how schoolteachers experience the possibilities of learning from each other within their work team and to shed some light on how teachers believe that cooperation affects their ability to learn and improve on a daily basis. My research questions are: What is the general discussion among the teachers concerning daily capacity building from enhanced teamwork? How important is well-functioning cooperation between co-workers for learning and daily capacity building? What are the prerequisites for a well-functioning learning situation within the work team?The study is based on five qualitative interviews with teachers within the same school but from different teaching backgrounds based on what grade they teach, what subjects they teach, and they belong to different work teams within the school. The interviews are semi-structured.The results have been analysed from a perspective based on the theories of organisational pedagogy and learning organisations.The results implies that the work teams does not function as a forum for exchanging experiences and learning from each other.

<- Föregående sida 13 Nästa sida ->