Several cities have implemented various projects to improve traffic safety in city centers.During 1970s and 1980s the city centers changed as the suburbs grew and large shopping centers were located outside the center. At the same time, several projects were initiated with construction of pedestrian streets and restriction of traffic in the center. In year 1994,shared-used areas were introduced in Sweden and these areas are often used in center environments.In Sweden, municipalities are responsible for integrating security in public places and in comprehensive plans and detailed development plans. The National Board of Housing,Building and Planning is the authority for administrating planning issues and develop general guidance about planning. Traffic is one of their key issues, although today there are no concrete guidelines from the National Board of Housing, Building and Planningfor the design of traffic safety in city centers.Traffic safety in city centers affects many people because the city center is a public place.It is therefore important that there are current guidelines available that are helpful for changes and improvements in traffic safety in the city center.The purpose of this report is to formulate guidelines for planning city centers from a traffic safety perspective.

Many buildings are now nearing the end of their service life. This applies to both the older houses from the 40's and 50's to the million project houses that did not prove to be as sustainable in the long run. Often there is a desire to extend the service lifetime, but to do that you need to make detailed inspections. The Folkets hus in Gävle is one of those buildings that is in need of renovation and to fulfill the new requirements that must be met in today's buildings. It is desired to make the buildings rentable space more attractive and to extend the building with two more floors.

This Master thesis is about a postal- and telegraphic building in Eskilstuna, Sweden. The construction methods for the specific building and buildings in general from the same time are described. The purpose of the report is to describe the loads acting on the building and how it has been built and why it has been rebuilt during the years. After this, possibilities of reconstruction and adaptation for today?s demands can be evaluated.

I did my degree project together with Universeum AB. The project had the work title: children?s world and the aim were to give children between 3-8 years old a place that was especially made for them. With their interests and needs in mind the area should trigger play but also learning through a well planned pedagogical environment.I did this project because I thought this was an excellent opportunity to really practise my new gained skills I had learned during my two years in CCD (Child Culture Design). It also gave me the opportunity to actually see how well my knowledge was working when it was put to the test, and I did learn a lot from this.Together with a crew of 6 people I developed and designed the area.

AbstractEmbla 5 is an office building which has done a large improvement. The clients of this building has made an order of WSP and the student Anders Kempe to calculate the use of energy for the building, and after that result proposing further measures which can decrease the energy use of Embla 5.The ground for this report is when calculation of the present energy use of the building is stated. To make that information of a number of parameters such as envelope, the heating system and ventilation has been located and set in to the simulation program IDA ICE which calculate the energy use.To improve the energy use further this project has been concentrated to change the system of ventilation. Today the ventilation system is of the kind CAV (constant air volume) and the air flow is dimensioned for after recommendations from BBR and Arbetsmiljöverket in the office spaces. Consider that Embla 5  is an office building where the people only staying for 8-10 hours/day so was the ide to see how much energy saving if the air flow is reduced the time people not being in the building.

For many years, the construction industry in Sweden has not developed much of an integral approach for design across disciplines. The sector?s impact on society, economics and environment is huge. To make the interactions within the construction industry more efficient, a relatively new concept called BIM (Building Information Modeling) has been introduced. The idea with BIM is that the different actors of the construction industry will work through intelligent CAD software, with common file formats and more cooperation between different actors during the various steps of the building and construction process.The technical consultancy company WSP Sweden is working actively to implement BIM within the frame of its activities.

During our education to become lighting designers at Jönköping University, the artificial lighting has been in focus. Therefore we wanted to learn more about daylight. We chose to do this from a visual approach in open plan offices. Since daylight is part of the architects´ responsibility to master, we wanted to examine what architects think of when they plan daylight environments in open plan offices and how this is expressed in the buildings with focus on the visual factors.Our questions at issue are:What knowledge do architects have concerning daylight planning, and how do they use this knowledge in their practice?How well do the chosen daylight environments meet the end-users need of a good visual environment? The study consists of three case studies, carried out in the same way.

A large part of research about libraries and library buildings in Sweden has been focused on how the building looks not how it functions with the library. The aim with this master?s thesis is to study how a library building is functioning and how its users are experiencing it. This is studied in three libraries, Kungliga tekniska högskolans bibliotek, Sambiblioteket in Härnösand and Vitterhetsakademiens bibliotek. With the questions of how they were planed, what did the libraries want from the new building and which of these demands were realized.

This is a dissertation for a Bachelor Degree Project at the University of Skövde. The project is carried out in cooperation with the company Kinnarps AB.The objective of this project was to develop a new chair for café and lunch rooms, which should satisfy the markets expectations and demands and match Kinnarps AB?s assortment today. The project has contained everything from identification of user and customer needs and requirements to evaluation and building of a prototype.The result is a chair with a frame of tubular steel and there is nothing like it in Kinnarps AB?s assortment today.

A case study of professional interaction designers' usage of design materials was conducted. Five interviews were performed in order to gain insight in the systems used by designers, how these work, how they collaborate within them, and what they think of recent research about them. Design studios allow collaboration for several users at once. Digital material (mockups, pictures, etc.) are commonly used, but needs to be made analog, e.g. printed, to be usable in the design studio environment.

In this thesis you will be able tofollow the design work of a drumtest. A tool that by having a rotatingdrum with equally positioned obstacleswill simulate the conditions a mountainbike rim will pass through.Initially there is a specification ofsome parameters and requirements thatthe design had to fulfill. There is alsosome brief background information aboutwhy a drum test is required for abicycle rim manufacturers and about thecompany Innolite Design AB that thisthesis is done for. After that itfollows an extract from conceptgeneration with the chosen concepts andsolutions but also some of the conceptsthat were not chosen.The thesis also contain a part where thereader cangain a deeper understanding of how thedesign works as well as some moredetailed facts about how the choice ofmaterials, their thicknesses, etc. havebeen made.

Problem: How do delivery logistics work in practice at the building site? Where are the big problems? How to make building logistics more effective? Do the site management and the haulers agree about questions concerning both parties? What is possible to gain by using better logistics? Is it possible to gain time with better logistics and by that reducing the costs? Purpose and aim: The purpose is to discover if there are any disagreements between the site management and the haulers. If disagreements occur they will be examined and probable measures based on the problems will be suggested. Another intention is to bring key ratios concerning time spent for deliveries forward. One aim is to update a similar report made in 1972.

This essay examines the international communitys intervention in Bosnia. The purpuse i to give the reader a deaper understanding of the problems appeared in re-building the bosnianstate. Office of the higher representive (OHR), was to become the koordinator of therecontruction of the institutions and governance. The theory used fore the examination isstate-building, whith an alingnment of state-building trough the international community.The second part of the essay examine the ideas of the High representive (HR) trough threedifferent dimensions. The idea-analysies search to present the core of ideas of OHR, nationalparties and the reconstuction of media.

In this thesis you will be able tofollow the design work of a drumtest. A tool that by having a rotatingdrum with equally positioned obstacleswill simulate the conditions a mountainbike rim will pass through.Initially there is a specification ofsome parameters and requirements thatthe design had to fulfill. There is alsosome brief background information aboutwhy a drum test is required for abicycle rim manufacturers and about thecompany Innolite Design AB that thisthesis is done for. After that itfollows an extract from conceptgeneration with the chosen concepts andsolutions but also some of the conceptsthat were not chosen.The thesis also contain a part where thereader cangain a deeper understanding of how thedesign works as well as some moredetailed facts about how the choice ofmaterials, their thicknesses, etc. havebeen made.

Design management är ett arbetssätt som har börjat tillämpas av allt fler företag de senaste åren, men det kan fortfarande vara svårt att förstå betydelsen av design management. I uppsatsen undersöks det vilken betydelse en design managers kompetens och position har för samarbetet mellan det designköpande företaget och en designkonsult under ett designinköp. Genom ett flertal intervjuer, utifrån både design managers och designkonsulters perspektiv, undersöks det hur samarbetet fungerar mellan dessa parter. En analys av intervjumaterial med hjälp av en teoretisk referensram bestående av design management-teori, design som en integrerad process och beslutsrollsteori har lett fram till ett antal slutsatser om design management. Några av slutsatserna är att design management, enligt teorierna, som arbetssätt inte är så vanligt och att det finns en viss samarbetsbrist enligt de intervjuade designkonsulterna, som i viss mån underlättas om design managern har kunskap om vad design innebär..