Air tightness in new buildings has been discussed for several decades. But the knowledge in the subject is low. With tougher requirements from the Swedish government about energy consumption for a new building required competences how these shall be met. It's not only the thick mess of insulation that are important, it's also the air tightness. This report is about air leakage in Swedish houses.

En byggnad mellan park och stad, placerad vid Hornsbruksgatan och Högalidsparken. Butiker, kontor och bostäder i en byggnad som förhåller sig både till en storskalig urban kontext och till parkens mer intima småskalighet..

Since the demands from authorities regarding lower energy consumption havebecome increasingly strict, this puts new pressure on designers and builders, who notonly have to ensure an esthetically pleasing building, but also make sure it issufficiently efficient to pass under new laws and regulations.This thesis takes into consideration a wide range of various parameters and theireffect on a building?s energy consumption. For this evaluation a computer softwarecomparison between the two programs Autodesk Ecotect Analysis and AutodeskProject Vasari was performed.Autodesk Ecotect Analysis is better suited for studies made on individual factors whileAutodesk Project Vasari is better used in experiments regarding the geometricalshape of the stucture itself.The results from the two different software tools used, give us both differences andsimilarities. For instance, both software programs produced the same resultsregarding the importance of the windows of the buildings to ensure a highly energyefficient building, both when it comes to the windows size and their U-value..

Rotskärsskolan is located in Skutskär, Älvkarleby municipality and the school conducted today consists of lower secondary. The school was built in the early 1960s and contains three buildings. Today there is a great need for reconstruction of Rotskärsskolan, when the premises are worn out and not suitable for today's education. It must therefore be a phased change involving all the school buildings, starting in the winter of 2008/2009.Our degree project involves one of these buildings, called house F. This building will, by a recent decision, be adjusted for classes from preschool up to grade five, special school and leisure activities when some of the municipality's schools will consolidate.

This bachelor thesis summarises the history of ?Jämtgården? based on literature research andempirical documentation. Jämtgården is a typical 1800th century duplex timber buildingoriginating from the province of Jämtland. However, it was moved to Västernorrlandslänsmuseum in Härnösand in the year of 1918. During the 1920's the museum decided tofocus on the region of Västernorrland and therefore Jämtgården was somewhat left behind.The building's interior walls are decorated with distemper paintings but the current conditionis poor.The aim of this thesis is primarily to compile knowledge about the building and its interiordecorations as well as finding out whether primary distemper paintings, from the periodbefore the relocation, remain on the walls.

Today there is an increasing market for businesses concerning horses, and since we are already running such establishments we sort of speak already have a finger in the pie. Due tothe increasing competition and demands, new and more practical constructions have become a necessity. In doing this project I wanted to make a comparison between having a stable integrated with a manege and having both constructions kept separate. I wanted to compare different layout and make an estimate of costs to see which solution would be less expensive and better with regard to working environment. I will further also deal with different ventilation-systems andlight transmissions.

certain building or environment can get a protection as a notable building if it contains certainvalues. These values are established by a certain category of people from the cultural sector.These people use established criterions to define the cultural value of the object. The objects canbe evaluated differently depending on who has done the evaluation. The people who protect thecultural environment and choose which buildings that are to be defining as notable buildingsoften uses a special model to characterise the different cultural values. This model is produced bya man called Axel Unnerbäck.

The purpose of this work was to see if it was possible to rebuild an old dairy house into a house fore sheep production. The goals fore the work was to see witch kind of production model was suitable, how the actual drawing would look like and witch kind of interior was needed. The building was built in the beginning of 1900. It is located on the mountain Kinnekulle in Sweden. It was a big production fore its time and hade about 60 dairy cows. It was a lot of hard work because the floor was built by big stone blocks and it was very hard to rebuild when some more automatic solutions came fore handling all the manure. The idea of remaking the building came when we rebuilt the roof fore 5 years ago.

Building Automation Systems in commercial buildings are often designed and installed by different contractors, using equipment and components from different manufacturers. The lack of an accepted communication standard has resulted in a few different standards. Many manufacturers of building automation systems only support one, a few or none of these standards, while developing proprietary system solutions. Regin, who develop such equipment, are planning to adopt an open communication protocol specially designed for building automation - BACnet. As a step in that direction this thesis was announced with the purpose to investigate the possibility to implement BACnet in one of their products and to gain more knowledge of the BACnet protocol.

When constructing an industrial- or hall building, the most common framework materials thatis used are wood, steel or concrete. Due to an assignment from Byggnadstekniska Byrån ABhas a document been created that makes it possible to investigate how the final costs is af-fected by gapes in between elements and which used foundation. And this with steel as thematerial. The purpose with this essay is to investigate which is the most well fitted materialwhen constructing an industrial- or hall building wood, steel or concrete. Information aboutthe different materials has been collected by litterateurs and by different internet pages.

The main object of this diploma work thesis is about how computer programs can bea tool to use for work on stormwater investigations. The advantage of using acomputer program compared with calculations made by hand is evaluated anddiscussed. The computer programs that have been used for studies and a sequence oftesting of the possibilities are Autodesks Storm and Sanitary Analysis and DHIs MikeUrban.Focus on sustainable development now permeates the building industry. As a resultstormwater investigations have been conducted in an increasing extent the recentyears. Stormwater is water produced due to precipitation, such as rain and snowmelt.Stormwater investigations normally contain descriptions of existing land use, plannedland use and suggestions of measures and technical solutions for the future disposal ofstormwater.The initial part of the thesis consisted of literature studies on stormwater andstormwater investigations to understand the science.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

Along with rising energy prices and increasing awareness of environmental issues, the criteria for buildings energy performance have been sharpened through the years. Today, ?passive house? and ?low energy house? are commonly used phrases in the construction industry and is expected to become increasingly common in the future.For houses with well-insulated building envelope the importance of well constructed details increases when minimizing the heat losses. Examples of these details are floor-wall junction and window openings in the wall. In such connections thermal bridges occur, which means that heat more easily is transported out of the building, compared to the rest of the building envelope.This report deals with detail solutions around windows and a comparison between a traditional slab and a foundation from Koljern consisting of foam glass.

Målet är att identifiera och ge fullständiga åtgärdsförslag på energieffektiviseringar för att minskaenergianvändningen med 25 % och därmed uppnå kraven för Green Building. De fullständigaåtgärdsförslagen ska redovisa ekonomi-, miljö- och hälsoaspekter.För att uppnå syftet med examensarbetet har ett konsekvent tillvägagångssätt använts för attidentifiera potentiella energieffektiviseringar för Smaland Airport. Med hjälp av den bakomliggandestudien ?Energieffektiviseringar Smaland Airport 2010-2011? analyserades kartläggningen avflygplatsens system och processer.Den totala energibesparingen för Smaland Airport uppgår till 646,1 MWh eller 22,04 % vilket fallerinom ramen för Sveriges klimatmål med en sänkt energianvändning på 20 % fram till och med 2020från 2008 års nivå. För att uppnå denna besparing krävs investeringar på 2,78 Mkr.

This thesis has been done in collaboration with Peab Stockholm Building 3, which is a region within the Peab Sverige AB. The report is based on a survey and studies of Peab business management systems and production literature. For general information gathering has literature from well-known sources collected in libraries and through the Internet. It shows through the work that Peab has routines for experience feedback in the construction process, but that these procedures work in a small scale and the practical work experience feedback does not work at all. This is also something the construction industry in general also perceived as problematic. The questions in the report are of a wide scale and concerns construction errors cost, how the employees perceive that the company takes advantage of the skills and the mental stress in production line. The goal is to find how Peab Stockholm Building 3 will work on the experience feedback to allow for better productivity. In conclusion, the report author tries to demonstrate what can lead to increased productivity and improved work experience..