Den här uppsatsen speglar ett examensarbete för Färggrossen i Nybro. Ett nytt måleriverktyg, närmare bestämt en lackpensel tas fram för yrkesmålare.Fokus för projektet har legat på användarstudier med hjälp av yrkesmålarna Thomas Molin och Mikael Brandén. Studierna har börjat med observationer utav arbetsprocess och hantering av verktyg, därefter uppföljande tester av skissmodeller.Två serier med skissmodeller tas fram för användarstudier och följs sedan upp med en förprototyp som detaljutvärderas. Resultatet blir ett verktyg med vinklat skaft som ska skapa en flexibel pensel för många olika grepp..

In the current situation is the straight tube cutter, that provides Luvata?s line of large recoolers with copper tubes, manually operated. To prevent damages and facilitate mounting the tubes must be properly arranged when they leave the machine. This report aims to investigate and present an automated solution where the operator does not need to participate in the process. A number of theories have been drawn up and tests have been done.

The goal of this project was to together with Cochlear Bone Anchored Solutions AB develop a new cleaning tool for their Baha?systems. Cochlear BAS AB is a daughter company to Cochlear Limited based in Sydney, Australia. Cochlear BAS AB is situated in Gothenburg and with its 150 employees develop and manufacture the Baha?system.

Our report procedure identification of instability and disturbance in an automatic manufacturing line of processing and assembling of chair sliding rails at Sapas manufacturing department in Vetlanda.To obtain a stabile ground we have mapped the material flow to receive a comprehensive view and to visualise connections.We have examined cycle times at different stations in purpose to identificate bottlenecks. The result of our examination showed that the bottleneck of the line was the brush station. This leads to that the expected bottlenecks identificated by Sapa gets a delay time and by that a longer cycle time.Interruptions has a clear negative influence at the line performance so we have also assemble data through the operators report list and compiled these in order to find out the interruptions effect on the line. The outcome during our assembled period was that the reported interruptions corresponded about 30 percent of the total available production time. This has a clear negative effect on the line productivity and efficiency as we have calculated in order to get the present status..

A reward cycle for investigating the emotional status in animals has been developed and it requires that animals go through three main phases, i.e. anticipation, consumption and relaxation. The reward cycle has not been tested previously for access to play in pigs. Therefore, the aim of this Master thesis was to investigate if growing pigs showed more behaviours indicative of excitement than pigs that were not allowed to play, performed play in a play arena and showed more behaviours indicative of relaxation after play when they were back to their home pen than pigs that were in their home pen the whole time. Forty undocked piglets (10 litters of Specific Pathogen Free half pure-bred Yorkshire and half hybrids of Yorkshire x Landrace balanced for breed between two treatments were used.

Examensarbetets stora fokus baseras på hur en kvinnlig antagonist skapas både utifrånestetiska och praktiska premisser. För den estetiska och tekniska normen utgick jag ifrånspelet Devil May Cry 4 (Capcom, 2008). Utifrån spelets modeller kunde en studie genomföraspå enstaka karaktärer där de tekniska begränsningar och den estetiska utformningen kundefastställas. Först har jag skapat ett koncept som baseras på de estetiska valen, och utifrånstudien fick jag fram informationen där jag kunde med hjälp av 3d program som användsinom spelbranschen tag fram en egen karaktär, i det här fallet en kvinnlig antagonist.Jag har velat skapa en kvinnlig spelkaraktär utifrån konventioner som samtidigt utmanas. Denkvinnliga antagonisten baseras på estetiska val och teman som framhäver karaktärenspersonlighet.

The aim of this thesis is to discuss selected parts of cataloguing both from a practical and a theoretical viewpoint. It presents the basic grounds for cataloguing of printed as well as non-printed materials. The focus lies on the main entry heading and its author/title problem concerning film. The thesis theoretical part consists of an analysis of central documents dealing with the author concept from both a library- and information science perspective and a film science perspective. The practical part consists of interviews from two Swedish public libraries, which have different approaches on presenting films.

The purpose of this study is to investigate if there is enough consideration taken to sensitive forest areas close to water or wetlands during clear cutting assignments, and to estimate the extent of damage made by forestry machines used at that time. A field and literature study is used to show how to improve and prevent the damage made in the wake of the machines. This study is made for Sydved, and shall culminate in a policy to prevent ground damage during their clear cutting assignments. The areas which were part of the field studies were clearcuttings on fine grained soil close to water and wetlands. The purpose was to find out if the water had been affected, what had been done to prevent ground damages and what more could have been done. The results of the field studies show that more work needs to be done to reach up to expectations. More information about the assignment area, better planning of sensitive regions, and strengthening of the main haul roads with brush are some of the improvements that can be done. There is also a need for more exact guidelines, follow-ups and education for everyone involved to have the same goals and understanding to prevent ground damage..

A brush of paint on a grey compound wall can mean so much more than simply an addition of colour. It can meanan appropriation of public space, a shared public space enclosed by a wall now ?owned? by someone. It can meanan arisen conflict leading to debate about the right to use public space.The Wall Project is a Mumbai based beautification project that uses paint and outdoor walls to brighten uptheir city. The Urban Typhoon workshop is an activity set up in self-evolving neighbourhoods where municipalinterference is scarce.

The development of defoaming additives is steadily progressing and there are therefore always new and improved additives on the market. Some modern additives provide the desired defoaming effects by themselves, in contrasts to previous additives that needed to be used in combination with other additives. The task of this bachelors thesis was to evaluate the possibility of using these improved defoaming additives, with the aim to find alternatives that give the system better defoaming attributes while, at the same time, using less of the primary products. The tests were carried out in the coating type Teknocryl Aqua Combi 2780. The coating is a waterborne air drying acrylat-latex/alkyd based coating that can be used for both single coat painting and primer.

Fuel pellets are in Sweden mainly produced from sawdust and cutter shavings. Before the pelletising process the raw material is dried to attain consistent moisture content and ground up in a hammer mill. In the densification process (pelletising) the ground material is forced through holes in a rotating die. This heats up the wood particles which cause them to soften and self bond. After the process the pellets are cooled, sieved and bagged. The milling process creates a wide range of particle sizes.

In an attempt to prevent ground damage and to reduce harvesting costs, StoraEnso's districts Värmbodal and Fryken, selected a number of final felling areas where the base roads have been marked by planners in the districts. The parties involved in the experiment are mainly planners, harvester operators and forwarder operators. The purpose of this paper is to determine the findings of this trial and to find cost savings or lost revenue. This has been done with a sample of interviews from the involved parties who logged the chosen felling areas. Literature about the interview process has been used to facilitate data collection, interpretation and analysis of the material. If we look at profitability based on assumed income and expenditure, revenue per MWh would be 63 SEK.

The project has been performed in a close collaboration with Hörsam who works in the field of hearing technology. In a first meeting with the company, the Project group was showed a few existing storage boxes for hearing aids. The company thought they were unnecessarily large with plenty of unused space and wanted a new, smarter solution to be developed.The project began with user studies in which audiologists, maintenance technicians, future users and others were interviewed. The purpose was to obtain their views on today's storage boxes and to find out how well the users maintained their hearing aids. It proved to be a large lack of knowledge regarding the management of hearing aids within the users.

Self-compacting concrete has soon been around for a decade. Recently the prefabrication industry has started to use this fairly new concrete type in larger scales, mainly because of its distinctive properties.  There are still certain areas that need to be thoroughly examined, such as bond capacity. There have been very few studies regarding shear capacity due to the fact that the procedure is complicated.This report will highlight a method to examine the shear capacity of different surfaces that have been prewetted as well as non-prewetted surfaces. The surface areas follow BBK 04?s and Eurocode 2?s demand for surface roughness.  A smooth surface will be completed in order to confirm if the different shapes influence the bond strength by shear stress or not.                       The purpose of this essay is to measure the bond strength within the shear capacity as well as examine the impact it has on surface roughness and treatment for shear bond.The method used to identify the shear capacity is called L-shaped Push-Off Test.

Fieldstudys on 22 farms (23 silos) to study relationships between the actual particle size of the maize silage and the theoretical length of cut. The measure of theoretical length of cut were stated by the farmers and not measured by us. Particle size of maize silage was determined using the New Penn State Forage Particle Separator. SLU Skara made a special sieve for us, that had larger holes than de original sieves. The samples were shaken after instructions and then the material was weighted. We have also been taking out samples for microbiological analyses from the silos on 13 of the farms.