Målet med detta examensarbete är att ta fram ett gränsnitt för navigering i stora datamängder samt undersöka eventuella styrkor och svagheter hos detta gränsnitt. Bakgrunden till projektet är att företaget Analog Software utvecklar ett system som automatiskt skall klassificera objekt i en datamängd och sedan presentera denna klassificerade datamängd.Gränsnittet skall stödja en informationssökningsstrategi som benämns ?browsing?. En teknik för visualisering av information som varit framgångsrik är den så kallade ?Fisheye-tekniken? som baseras på en analogi med en vidvinkellins.

As EU?s authority increased the number of lobbies in Brussels grew. Today there are approximately 15 000 lobbyists in Brussels. EU decisions and EU directives can have a huge impact on companies and organizations. They can however influence these decisions and directives through lobbying.

This bachelor thesis in mechanical engineering was performed during the spring2015 in collaboration with Composite Consulting Group in Laholm. TheComposites Consulting Group works mainly with design and details of differentcomposite projects, their main area is FE-calculations, 3D-modelling andmechanical tests with composite materials.The aim of this bachelor thesis was to simplify the calculation process of solidmechanics for sandwich panels by simulation with computer software. The goalwas to decrease the time for the design and calculation process of the constructionand the cost of the practical tests. Our task was to build a static three dimensionalmodel with the computer software Abaqus, where the result should correspondwith the practical pressure tests in laboratory.The project started with collection of material data from Composites ConsultingGroup and by learning the software Abaqus, simultaneously a specification wasdeveloped in corporation with the company. Later on, a static wheel pressuremodel in the software Abaqus was produced which simulated the behavior of thesandwich panel during static wheel-pressure by a pallet truck.

Much attention has been directed to Charity Foundations and how they use the donations given to them. Donators and external organisations put pressure on and evaluate the performance of Charity Foundations. The purpose of this thesis is to increase the understanding of how Charity Foundations handle the pressure from external parties through a qualitative case study of one Swedish Charity Foundation. The most important external factors have been identified and the accountability relationships between each party and the Charity Foundation have been examined. The empirical material was collected through semi-structured interviews and from written sources.

The purpose of this trial was to evaluate the possibility to use sampling of faeces, urine and plasma, and measurements of blood pressure as methods of discovering hypomagnesemia in horses, as well as the application handiness of these methods. The most commonly used method of checking the magnesium status of a horse is to analyze samples of serum or plasma. The trial was of a switch-back design, in which the horses were used as their own controls. The animal material was five Swedish warm blooded trotters between six to ten years old, and weighing between 485-620 kg. The trial consisted of three periods that were two months each.

In the 1980?s the moose population in Sweden grew explosively due to big changes in the silviculture with clear cuttings instead of single-tree selection. Clear cuttings brought big areas of young forest and therefore a lot of fodder in one place. Since this change, the discussion about how to manage the moose population has grown into a very big problem. Forest owners think that the population needs to be strongly reduced because of all the damage that is done to the young forest when the moose seeks its food, and the economic losses because of that.

The European Brown bear (Ursus arctos) has gone from basically being extinct in Sweden to, 2008 being estimated to a total of 3298 individuals. When looking at the new Swedish moose management system it is important to have an ecosystem-based approach and therefore include all the parts that moose impacts on and from in the management, especially the brown bear. Primarily in the spring and early summer the brown bear is a significant predator on moose calfs which must be taken into account in moose management. When the bear recolonize areas that it has previously been eradicated from, it will once again come in contact with people who are not accustomed to the bear's role in the ecosystem. We studied three groups of moose management areas with different predation by bears.

Test bench for air bearingsThis thesis work consisted of bringing forward and defining the test parameters relevant for a test bench and constructing a test bench that can test and verify the largest existing air bearings that are of use in Micronic Laser Systems AB machines. Because the knowledge about air bearings is limited it is thought that with the help of the test bench the knowledge would increase and in that way improve the air bearings.After learning more about air bearings and their purpose at Micronic Laser Systems AB, I started the concept phase for the test bench. For each part in the test bench I consulted my two tutors, Torbjörn Hedevärn and Johan Bergqvist, at Micronic Laser Systems AB. The final concepts where documented as 3D-modells in Solidworks and some of them have been tested in Solidworks FEM-program.The test bench is designed so that, with the help of a pneumatic cylinder, 25 kilo weights are placed on the air bearing to test its stiffness, damping and the pressure performance under its surface area. To test these parameters the test bench has to have a pressure meter, accelerometer and a microcator.

This report analyzes and examines a hypothesis for finding a method to optimize thelength of the delubrication process time based on a total charge weight. The work hasfocused on the holding time for delubrication and the total charge weight.An important step in the manufacturing chain of cutting tools is when the greenbodies undergo the sintering process. Today, the delubrication step has the sameprocess time independent of the total charge weight. An implementation of a methodto adjust the delubrication process time would give more consistent quality of thecutting tool´s internal characteristics but also reduce the time course of the sinteringprocess. In the present project two methods for this goal were tested, thedevelopment of an algorithm and a weight interval subdivision with associateddelubrication process times.During delubrication a pressure increase is observed due to the decomposition of thePEG in the powder mixture.

The main aim of the study was to examine the importance of organizational climate for affective job-related wellbeing. A further aim was to investigate potential differences in employee level in the experience of organizational climate and wellbeing. Another purpose was to see if there was agreement in the view of the organizational climate among the employees. Questionnaires were collected from 44 employees at a chain store. Results showed that Integration, Involvement, Supervisory Support, Training, Welfare, Innovation and Flexibility, Goal Clarity, Efficiency, Effort, Performance Feedback, Pressure to Produce and Quality had a great influence on Enthusiasm but only Pressure to Produce and Welfare correlated with Anxiety.

Since prehistoric time man has used wood to build their environment. The material?s availabilitycombined with its good mechanical properties has often made it the material of choice. Like allmaterials exposed to natures degradative processes the properties of wood decreases over time.Rot, UV radiation and attacks by insects and pests damage wood if not protected. Since we wantwhat we build to consist, optimizing our building materials durability is of great interest.Techniques and methods for increasing the endurance of wood have been developed in severaldifferent places and for a long time.

ABB Motors and Generators manufacture large AC machines with oil lubricated plainbearings. The machines have occasional problems with oil leakage from the bearings. aproblem that ABB wants to be solved.In this thesis the cause of this leakage were investigated, with focus on the bearingseals.The purpose of this work was also to suggest amndments for preventing thisproblem. , and to suggest improvements that can prevent this. The first step was todo a literature survey of earlier work on this problem, study the theory ofhydrodynamic bearings and different types of seals and their properties.

AbstractWith increasing population and increasing demands for comfort and thus an increase in energy demand, it is necessary to examine various energy-efficiency measures. This work deals with the ability to control the flow through the heating system to achieve the desired comfort with as little energy as possibleA heating system contains of different parts, roughly speaking, you can divide it to three main components: Heat source, Distribution and Heat emitters. All components are working together to bring heat to the building. What is examined in this report are different ways of adjusting the flow and supply temperature and how it affects comfort and energy use in a building.At today ?s date the conventional method is to use a high flow through the heating system, which affects pressure drop and cooling of the fluid.

Background and purpose: Volleyball requires a lot of the human body, andeffective core stability is necessary for the athlete. Our muscles cooperate as achain of motions and core stabilization is the base for the moving muscles.The most well-known stabilization muscle is m.transversus abdominis (TrA).The purpose of the present study was to evaluate the function of TrA inSwedish female elite volleyball players and to observe the influence of eightweeks of stabilization exercise on the TrA. Method: 10 female elitevolleyball players (mean age 24,7 years, range 18-31 years) participated inthe study. TrA was measured in supine position with a pressure biofeedbackunit. Subjects were instructed to draw in the abdominal wall without movingthe pelvis and hold for 10 seconds.

When building a house or similar the stress on the ground increases and deformations can arise. The deformations create a foundation that the building is not constructed for and damages on the building arise. The increased stress on the ground can be derived back to the building, but it is possible that the increased stress may well derive from different sources such as other buildings or trees.       The building is an older property, built in the late 19th century alternatively early 20th century, and is today used for rental housing and has suffered severe damages due to subsidence. The goal of the thesis is to find possible causes for these subsidences. The thesis was executed as a combination between literature- and casestudie. After careful studies it has been found that a probable cause for these subsidences is trees. Through field- and lab studies it has been found that the trees has effected the ground through there accumulation of water.