At the farm Fride, in Lojsta at the Southern part of Gotland, my family runs a pig production with 80 part-integrated sows in a ?Familybox-system?. The main parts of the facilities are from the early 90´s and have done their job. The production results have the last years decreased because of new infections so we have to do something before shifting ownership! This degree thesis is meant to answer the question about which the optimal extension would be today. By studying literature, use my own experience and make lots of calculations, I try to find out different opportunities.

The purpose of this thesis was to make an energy survey and quantify energy flows of individual unit operations associated with the biogas production in Uppsala Vatten och Avfall AB:s biogas plant, located at Kungsängens gård. Moreover, large consumers of energy would be identified and analyzed. The objective of this energy survey was to obtain a detailed understanding of the energy use in the biogas production. The energy survey was divided into two parts: electricity and heat. Each part was treated separately and with somewhat different approach. To estimate the electricity usage during the projcet the rated power of each selected unit operation was noted and multplied with the measured time of usage.

The purpose of this thesis was to make an energy survey and quantify energy flows of individual unit operations associated with the biogas production in Uppsala Vatten och Avfall AB:s biogas plant, located at Kungsängens gård. Moreover, large consumers of energy would be identified and analyzed. The objective of this energy survey was to obtain a detailed understanding of the energy use in the biogas production.The energy survey was divided into two parts: electricity and heat. Each part was treated separately and with somewhat different approach. To estimate the electricity usage during the projcet the rated power of each selected unit operation was noted and multplied with thenmeasured time of usage.

Cement manufacture accounts for 3-5 percent of total global carbon emissions. There is a growing interest in reducing the environmental impact and conserve limited natural resources. In cement production, clinker productions consume 87.5 percent of the total energy consumed in the cement manufacture.Cementa has since many years, focused on reducing the environmental impact of cement production. The work has involved the entire production process from selection of alternative fuels to the development of cement with less clinker content. During 2013/2014, two new types of cement (Bascement and CEM II / B) will be introduced to the Swedish market.

This master thesis was conducted in order to investigate the effects of the browsing species Yeheb on animal tissues in Swedish landrace goats and to make a literature review in order to increase the knowledge of the importance of this plant for livestock production in Somalia. The evergreen Yeheb bush is a very important feeding source for grazing and browsing animals in Somalia during the dry period. Yeheb contains cordeauxiaquinone that stains the bones of the animals red/pink, which has been an increasing problem when exporting meat to foreign countries. In an experiment, two goats were fed dry and fresh leaves from the Yeheb bush for one and two months, respectively. The goats did not feed the intended amount of dry leaves, since the supply and palatability was not as high as estimated.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

At the beginning of the 1970´s forestry feared an imbalance in the future wood supply. Because of this anticipated "timber slump" forest companies undertook a variety of measures to counter this. One of these measures was the introduction of exotic tree species. The choice finally ended up with lodgepole pines which were considered a fast growing tree species compared to our native tree species. Theambition for the new lodgepole pine stands were to run these with rotation periods of between 40-60 years, thus smoothing out the ?timber slump? that was anticipated.

Food is widely consumed and in 2011 an average American devoured approximately one ton of food. The production of these goods requires large amounts of energy and contributes to 22-31 % of all greenhouse gas emissions occurring in Europe. More than one third of the produced food is discarded instead of consumed, and food waste make up about 30 % of the waste generated by households. 60 % of this food waste could be avoided if the eatables were handled in a better way.Avoidable food waste arises partly because residues from food are not taken care of, and because the food is not stored in a way that optimise its durability. Residues arises part- ly because of the contradictory and complex demands of everyday life and are, because of our busy lifestyle, difficult to avoid.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

Value stream mapping is a tool that is frequently used by many different companies. It is a great tool used to achieve the work that follows the theories of lean production. The tool is used, however, only frequent on the factory floor and the method is also designed based on this type of use.An interest of applying the method on administrative parts of the company has occurred lately. Administrative parts of the company refers to the part that does all the planning such as purchasing, receiving orders, customer contact, contact with factory floor and other work that is made around the actual manufacturing. But the knowledge about applying value stream mapping on the planning part of the company is lacking because the method is relatively new.In this work, a comparison is made between the introduction of value stream analysis on production and planning.

This paper analyzes Allt, Martina Lowden's novel from 2006, from a media discursive perspective. The theoretical framework consists of Michel Foucault's discourse analysis, Friedrich Kittler's research on hermeneutic reading, and N. Katherine Hayles's studies of pattern?randomness controlled meaning production. Various examples on how communication technology influences the narrator?s act of writing illustrate the medial discourse surrounding the body of Allt.

Due to the obvious fact that one can never be hundred percent sure of what's hiddenunder the ground surface, construction work is naturally hard to project.However, many of the work methods are executed in the same way on variousprojects. The department of construction work at JM AB region öst describes a lackof follow-ups and feedback between the calculators and production managers.In this thesis we have studied the communication between these groups and alsohow they share experiences and knowledge. In order to get the full pictureof the day-to-day operations we used three methods to gather information. Studyingliterature gave basic knowledge of theories about feedback, and thenecessity of working with giving feedback. In order to understand the process ofconstruction work we made several interviews, both structured and nstructured.

This thesis describes redesign and adaption of a products housing. In order to make it more economical to produce at a lower production volume. The thesis is based upon a prototype that a previous student developed for injection moulding. The goal is to find alternative manufacturing methods, but also to identify parameters that affect the cost of the injection moulding tool.The housing must be tough in order to protect the circuit board inside. But at the same time it must allow sound, light an electrical communication to pass through.

Our employer Camatec Industriteknik AB gave us the assignments to increase theirs range of versions on Camcoil that is their own patent product. Camcoil is a capstan system that is used when steel band fabricated. Exist for example in production lines their steel band should be annealed. Our goal with this work is to come up with a completed production basis on a Camcoil for heavy industry. The basis should contain calculations, 3D-constructions, drawings and cost proposal on manufacturing and detail purchase.Demands on this project:1.

Quality assurance for Scania engine componentsScania engines have become one of the world?s most renowned corporations in themanufacturing of engines. This is mostly due to the quality and performance thatScania have shown. However, this does not stop Scania from trying to achieve moresuccess in the fields of development and research to assure the quality of theirengines.The purpose of this thesis is to show how Scania ensures the quality of the enginecomponents, both those who made externally and internally at Scania, also inclusivethe manufacturing and assembly process.Three engine components were examined: D16 block engines, water pump andXP-Iinjectors. The study included the whole process from the step of supplying therow materials to the last step in production functional test.In this thesis an investigation of how other companies are working with qualityassurance was conducted.