We got in contact with Marco AB, who we?ve had contact with before concerning earlier projects, to find out if they were interested in arranging a larger project for our last class (Examensarbete 15hp). They were very positive to this proposition, and soon they offered us a project regarding reconstruction of their current mechanical device that absorbs all the force from the lift itself when it is at a predefined level (sv. sjunkspärr). The current solution does fulfill the requirements that are given, however it is not a solution that gives a high level of satisfactory.

Today there is no way of measuring or simulating turbulent flow in high Reynolds numberenvironments. The computational power required to simulate these conditions is not expectedto be available for several decades so instead the CICLoPE project aims at solving thisshortage by the construction of a long carbon fiber wind tunnel in which real measurementscan be made. To do accurate measurements it is of importance that the wind tunnel, 0.9 metersin diameter and 110 meters long, is as straight as possible.This master thesis treat the design and construction of a device which may be used to align thetunnel along a reference laser beam. A design is presented which allows the pipe to be alignedwithin about a quarter of a millimeter along its entire length. Contents span over severalscience fields such as physics, mechanics, control theory and electronics.The result is a theoretically correct design.

Shear Strength and Deformation Characteristics of Uppsala Clay with CRS and Standard OedometerTyra Morell Bonin & Magdalena MählerTo see how much a clay compact under different pressure one can use several different methods and in this project, two methods were used, the Standard Oedometer and a CRS apparatus. A Standard Oedometer is a full-time manual device and the CRS apparatus is a modern electric and automatic device. The aim of the project was to see similarities and differences between the two methods and examine which method that were most reliable. This has been done with repeated laboratory tests and afterward evaluations. With this information one can get a picture of how the clay will behave and how it will deform in nature.

Medicinering vid sjukdomstillstånd i det främre segmentet av ögat hos häst är ofta tidskrävande och komplicerat för djurägaren. Syftet med studien var att undersöka om ett nytt tekniskt hjälpmedel, en spiral som kallas OphthaCoil, fungerar för långtidsmedicinering hos häst. Två olika designer på spiraler utvärderades. Efter en ögonundersökning placerades en spiral i nedre konjunktivalsäcken och hästen observerades till dess spiralen trillade ur. Resultaten visar att ingen av de använda designerna låg kvar tillräckligt länge för att kunna användas för en längre tids behandling.

This study investigates augmented reality using third person perspective and what precision can be achieved by using this method. There have been prior studies in regards to precision using augmented reality, however studies using third person perspective is scarce. This study presents a solution using a static camera capturing the user as well as the plane to augment from behind. This augmented image is then transferred to a handheld device that is held by the user. Using this method the user will be free to manipulate and work with the plane without removing the device that captures the scene, a common problem when using visual reference markers in augmented reality.

We got in contact with Marco AB, who we?ve had contact with before concerning earlier projects, to find out if they were interested in arranging a larger project for our last class (Examensarbete 15hp). They were very positive to this proposition, and soon they offered us a project regarding reconstruction of their current mechanical device that absorbs all the force from the lift itself when it is at a predefined level (sv. sjunkspärr). The current solution does fulfill the requirements that are given, however it is not a solution that gives a high level of satisfactory.

The dialysis ward at Karolinska University Hospital is a highly pressurized work environment filled with critical treatment situations where patient?s lives can be constantly in danger. Staff have to deal with a myriad of alarms and error codes in response to their patients varying ailments. The workforce at the dialysis ward lack controlled environment training, sufficient to address all of the potential treatment scenarios, with no risk of jeopardizing the patient?s condition.The purpose of this essay is to design and test the efficacy of using an IT based device for dialysis education at Karolinska University Hospital.The main topics this essay intends to address are:? Identification of user scenarios and training fields.? Prioritization of key training areas.? Utilization of IT in effective staff training.? Design of a conceptual prototype.The process focuses on the user and their needs.

Volvo Human Monitoring (VHM) is an ongoing project at Volvo Cars where they measure, amongst other parameters, inhalation and exhalation through a device called Respiratory Inductance Plethysmograph (RIP), on drivers. RIP measures changes in the cross-sectional area of the chest and abdomen. When the driver is in motion, such as when she is turning the vehicle, the cross-sectional area changes and noise in the RIP signal may arise.The noise results in a large number of manual adjustments in the analysis of the RIP signal, which is very time consuming and the validity of the device for measuring inhalation and exhalation is questioned.The purpose of this study was to improve the efficiency of the analysis of the RIP signal. The goal was to create a new data processing tool in Matlab that automatically detects inhalation and exhalation from a RIP signal with higher validity compared to the previous data processing tool.In this study, nine tests were performed on drivers while they were driving in different scenarios such as highway, country road and in city traffic. Inhalation and exhalation was measured using a RIP, a pneumotachograph with a tightly sealed facemask and a thermocouple placed between the nose and mouth, which was used as reference to the RIP.The result of this study was a data processing tool that automatically detects inhalation and exhalation with higher validity compared to the previous data processing tool.

Volvo Human Monitoring (VHM) is an ongoing project at Volvo Cars where they measure, amongst other parameters, inhalation and exhalation through a device called Respiratory Inductance Plethysmograph (RIP), on drivers. RIP measures changes in the cross-sectional area of the chest and abdomen. When the driver is in motion, such as when she is turning the vehicle, the cross-sectional area changes and noise in the RIP signal may arise.The noise results in a large number of manual adjustments in the analysis of the RIP signal, which is very time consuming and the validity of the device for measuring inhalation and exhalation is questioned.The purpose of this study was to improve the efficiency of the analysis of the RIP signal. The goal was to create a new data processing tool in Matlab that automatically detects inhalation and exhalation from a RIP signal with higher validity compared to the previous data processing tool.In this study, nine tests were performed on drivers while they were driving in different scenarios such as highway, country road and in city traffic. Inhalation and exhalation was measured using a RIP, a pneumotachograph with a tightly sealed facemask and a thermocouple placed between the nose and mouth, which was used as reference to the RIP.The result of this study was a data processing tool that automatically detects inhalation and exhalation with higher validity compared to the previous data processing tool.

In Sweden there are 560 000 disabled people over the age of 16, half of those are in use of some kind of mobility device.Living with a disability means that due to injury or illness you are having trouble functioning without devices or assistance in your daily life and has a big impact on the independence of the disabled user.The everyday life for disabled parents with young children are different depending on the type of disability and mobility device.Today there is no alternative to the stroller for the disabled user who use mobility advises. This causes problems when the disabled person on there own have/want to move the child.The following statement have been the cornerstone for this project: How to make it possible for a wheelchair user to move a child, in the 0-2 year, for longer distances with a focus on independence and safety for both adult children?Due the process, of industrial design, this question and problem have been solved during 10 weeks. The process have contained parts as meeting with users, analyzing, concept development, evaluations, mock-up making, testing, shape & color development etc. This in the end have resulted in a full scale model of the appearance of a proposed product.The result is a stroller witch can be connected to the users specific wheelchair due two one time adjustments.

Virtual communities are a phenomenon that is becoming more common as the information technology comes with in reach for the general public. This report will bring the theories and construction of a virtual community together. The purpose of this report is to describe the different theories that have emerged from the research within this field and to examine the work procedures that have been used during the development of a site for a MDA-community. The MDA-website is a homepage on the Internet that was developed to bring the students closer together. The report describes the work of the project group, why the website was not completed and at the end the theories are looked at on the basis of the construction of the website..

The aim of this study was to gain a better understanding of resource schools 1 as a human services organization and institution, based on teachers and principals? perspectives. The purpose of resource schools is to provide the students tools and resources to enable them to return to the regular school within two years. The study also aims to examine more closely how this objective applies to the studied resource schools in the studied municipality, as well as highlighting the success factors and barriers that exist to achieve the goal. Previous studies show that this kind of differential practice tends to become a permanent solution.

The purpose of the present study was to study if the systemic blood pressure in cats significant increases due to stress associated with a visit to a veterinarian clinic. We also wanted to investigate the clinical utility of two different methods for indirect blood pressure measurements in cats by assessing how easy they were to use and how reliable measurements they provided. The methods that were used were oscillometric (Memo Diagnostic) and ultrasound-doppler technique (Minidop). The blood pressure was measured in both clinical environment and home environment. Fifty cats were used in the study, from which measurements were impossible to obtain in one cat.

The purpose of this master thesis is to examine a proposal for basic class 4 in UDC, which has been empty since 1964, and to pick out a negotiable subject for that proposal. The proposal is analysed from a theoretical perspective based on principles created by S. R. Ranganathan. Three principles are used.

The aim of this study was to evaluate the stir drying method, for drying of grain during Swedish conditions. The evaluation was done during the harvest year 2004, on four farms with stir driers. The driers were evaluated for their energy consumption, design, stirring effectiveness and how much time the farmer has to spend on every tonne of grain. A comparison was also done with conventional Swedish high temperature driers. Totaly six batches of grain from stir driers were examined, mostly winter wheat, but also barley and wheat.