Syftet med denna uppsats är att få en insikt i hur informationssäkerhetsarbetet påverkas av Bring Your Own Device (BYOD) i kombination med cloud computing. Författarna har kommit fram till sin slutsats genom att utföra intervjuer på två olika verksamheter samt en enkätundersökning som sedan har analyserats med aktuell teori. Utifrån detta har en kravspecifikation tagits fram som ett vägledande bidrag för organisationer..

This report is a thesis work for a B.Sc. in Forestry exam at the School for Forest Engineers, SLU. The work was an assignment from Sydved Energy AB. The aim of the work was to compare the operational productivity between two kinds of forwarders for extraction of harvesting residues, one forwarder with a special compression device and one ordinary, slightly modified forwarder. Two sites were studied for each forwarder. The study shows that the annual production was about 11,000 m3 higher for the traditional forwarder. The cost for the traditional forwarder was SEK 0.9 lower per m3.

This thesis is a part of the DySCAS (Dynamically Self-Configuring Automotive System)project which has the overall purpose of creating a middleware for the electronics in an automotive environment. The thesis has been made with collaboration with ENEA AB who is a member of the DySCAS project. ENEA AB has developed a demonstration platform to test the fundamental ideas which the DySCAS project is built on.The purpose of this thesis was to design and implement a GPS application to be added to the demonstration platform. This was done by adding a GPS receiver to the original DySCAS demonstration platform and designing and implementing an application to be able to extract the information from it. The resulting application is able to present cur- rent position and absolute time to the DySCAS networks as services to be used by other applications or by the network it self.

A new type of device for measuring thev m& ?rate of fuel sprays from a diesel fuel injector has been developed and the various steps in the development are described. The device works by deflecting all of the sprays from the injector at the same time by using a bell shaped deflector. A load cell consisting of a machined steel part with strain gauges mounted on it measures the resulting force. The shape of the curvature in the deflector bell shape has been evaluated by photographing the flow in a 2D?version of the curve shape.

De avancerade tekniska enheterna blir ständigt fler och människan blir allt mera beroende av att ha med dem överallt för att utföra olika ärenden. I de flesta fall rör det sig om så kallade smarta telefoner och surfplattor. Nu när vi privat har tillgång till de senaste och mest avancerade enheterna börjar användandet av dem för arbetsrelaterade uppgifter få fart och begreppet Bring Your Own Device (BYOD) växer fram. Verksamheter ser efterfrågan ifrån sina anställda som vill arbeta från sin egen enhet och försöker möta behovet. Dock ökar säkerhetsriskerna när företagsdata laddas ner till den anställdes privata enhet och vandrar med dem ut ifrån kontoret.

The project contains a force analysis of the vertical axis wind turbine Lucia's supporting arms and a measuring device to experimentally measure the forces is made. The forces between the supporting arms and the tower are calculated theoretically and then simulated by a computere. A measuring devise is then designed to measure the forces experimentally. The forces acting on the attachment between the supporting arms and the tower is primarily the centripetal force, gravitational force and the aerodynamic forces on the rotor wings. The maximum forces were theoretically calculated and is 13.38 kN along the x-axis, -0.25 kN along the y-axis and then 0.5 kN along the z-axis.

The running of gas turbines with low emissions causes high pressure pulsations to arise in the combustion chamber. These pulsations are high amplitude sound vibrations. At some frequencies these are harmful to the gas turbine. Hence these pulsations are monitored to avoid operating conditions where pulsations are specifically harmful. It is necessary to expose the system of known pulsations to verify the functionality of the monitoring process.

The eld of Brain-computer interfaces (BCI) concerns linking together an external device with the brain of a human or an animal. By doing this the conventional use of a mouse or keyboard can be circumvented, which can greatly benefit people with different types of diseases that cause paralysis or other loss of motor control, such as Amyotrophic lateral sclerosis (ALS). A BCI can also be used for cognitive training of either healthy or mentally impaired subjects to increase cognitive capabilities.In this thesis an implementation of an interface is made against such a device, the Emotiv EPOC Headset. The result is meant to be a stable basis for further study using the device. An in-depth study of the history of EEG and its current use in clinical work and research in the topics of BCI as well as Human-computer interaction (HCI) is presented.

Background: Health economic evaluations are becoming an increasingly important means of analysing which care alternative resource utilisation is the most cost effective. It is a new topic in the medical device industry that causes much uncertainty and unstructured use of the actors involved.Study questions: Why is it difficult to develop, implement and disseminate this standardized health economic evaluation models in medical technology? Is there a possibility to standardize health economic evaluations within the medical device industry?Purpose: The purpose of this study is to investigate the standardization issues for health economic evaluations within the medical device industry.Method: A qualitative approach was used in the form of interviews with five actors that are active or have a connection to the medical device industry. The data collection consists of journals, reports, Internet searches and literature among other things.Conclusion: It is possible to standardize, but with certain restrictions such as the county council's budget, influence of industry-specific factors, lack of knowledge and the important interaction between actors..

As new ways of using computers are constantly being developed, other ways of interacting are made possible. One of the most desired types of interaction with computers is a touch-screen where the user can actually organize everything simply by using the fingertips. The purpose of this project is to enhance an existing framework with an application that works with a touch-screen device. The application is to be used as a tool for presentational usage. The result is an application where the user by simple means can use a touch-screen to hold a professional presentation.

This thesis has been adjusted because some parts are classified, some sentences might have been changed. Electric bikes are a convenient mode of transport, a good choice when long distances or tough slopes can be an obstacle.The goal of the project was to create a prototype on a locking mechanism with an inductive charger for electric bikes.The idea behind the project was to develop a user-friendly locking mechanism, where the bikes would be charged inductively when they were locked. To implement the project facts about induction, battery charging and locking devices was needed to be acquired. Circuits for induction charging were created and a lock device was constructed. A microprocessor was used to control the entire system.A prototype was designed with a locking device and an inductive charger fixed in a bike rack.The entire project became very wide which resulted in that not all of the parts of the project could be completed.

The purpose of this work is to design and construct a device able to measure the mechanical attrition of oxygen carrier particles. Those particles are used in chemical looping combustion and in the present situation there is a lack of knowledge in how the attrition process work and in which extension. To find already tested solutions trying to answering this problem a literature study wascarried out and the best solution found was the so called Grace-Davison Jet-Cup method. This method is supposed to emulate the attrition caused by a cyclone separator and its advantages are that it is possible to use small test amounts, 5-10 g, and a thirty minutes long test will be enough to acquire useable results. An device was designed based on the Jet-Cup method with some slight modifications.

The purpose of this work is to design and construct a device able to measure the mechanical attrition of oxygen carrier particles. Those particles are used in chemical looping combustion and in the present situation there is a lack of knowledge in how the attrition process work and in which extension. To find already tested solutions trying to answering this problem a literature study wascarried out and the best solution found was the so called Grace-Davison Jet-Cup method. This method is supposed to emulate the attrition caused by a cyclone separator and its advantages are that it is possible to use small test amounts, 5-10 g, and a thirty minutes long test will be enough to acquire useable results. An device was designed based on the Jet-Cup method with some slight modifications.

This thesis has been adjusted because some parts are classified, some sentences might have been changed. Electric bikes are a convenient mode of transport, a good choice when long distances or tough slopes can be an obstacle.The goal of the project was to create a prototype on a locking mechanism with an inductive charger for electric bikes.The idea behind the project was to develop a user-friendly locking mechanism, where the bikes would be charged inductively when they were locked. To implement the project facts about induction, battery charging and locking devices was needed to be acquired. Circuits for induction charging were created and a lock device was constructed. A microprocessor was used to control the entire system.A prototype was designed with a locking device and an inductive charger fixed in a bike rack.The entire project became very wide which resulted in that not all of the parts of the project could be completed.

The objective of this study was to investigate how the local newspaper readers felt about reading the local newspaper in a tablet device, such as the iPad. We wanted to study the attitudes from consumers towards tablets and if the traditional local newspaper can be substituted with a tablet device. We decided to use qualitative interviews as our method. The selection of respondents was based upon age, whether or not they had a subscription and if they owned a tablet device or not. We accomplished fifteen interviews with respondents living within the area where the newspapers of Barometern and Oskarshamnstidningen are spread. The study shows that the majority of the respondents who already had a subscription tended to lack interest in changing their traditional newspaper consumption. Their habits of reading the local news on paper were strong.