In the year of 2011, the new CEO of AB Volvo announced a major reorganization. This reorganization was a contributing factor to the start-up of this thesis.Volvo Group Logistics Services (VGLS) is Volvo Group?s global logistics partner, which designs, manages and optimizes all of the group's incoming and outgoing logistics flows. With the reorganization, VGLS started a project regarding responsibilities around railway flows. Within the project a demand to collect logistics requirements occurred.

The situation at Plastal AB is following; the plant in Simrishamn has not capacity enough but the plant in Kristinehamn has unused capacity. My task with this master thesis is to build a logistic flow between this two plants, optimize purchase quantities and ensure delivery safety.The production of the Intermediate Section (LS) will be divided between the plants. The LS will be produced in the following way; the injection moulding process will be done in Simrishamn and the assembling and lacquering processes in Kristinehamn, The reason to divide the production is to ensure delivery safety. Plastal AB can not move the whole production of the l.S because the two plants have different processes (moulding res. injection moulding).When the 1.5 has been transported to Kristinehamn following moments are included in this order; lacquering, welding and assembling.

Transportation represents 10-15 % of wood supply costs. It is therefore important to improve efficiency in the transport system to decrease these costs. The aim of this study is to map the timber vehicle routing processes used by a sample of timber hauling contractors and to identify possible links between the vehicle routing process and service and economic variables. The study was carried out at Södra Skog in autumn 2008. 15 timber hauling contractors were sampled and interviewed about their work with timber transports.

This thesis examines a possible control strategy to minimize flow fluctuations in Uppsala?s district heating system. High variations in flow rate may lead to complications caused by hydraulic constraints in the district heating system. These complications, such as inadequate pressure and temperature levels, increase the risk of heat delivery failures. It is therefore important to avoid such situations both for the producer and for the customers.Typically, the forward temperature is controlled by using a rough correlation with respect to the outdoor temperature.

The aim of the present study was to gain a deeper understanding of the experiences of the contact with the ?fear of childbirth?-team (called Aurora-team) made by women who feared childbirth. Qualitative content analyses according to Graneheim and Lundman was used to analyse 91 womens own written notes made at the end of a questionnaire which (with a quantitative approach) evaluated the counseling made by the Aurora-team at a hospital in the south of Sweden. The following five categories developed during the analyses; experience of the conversation, not knowing creates fear, thoughts regarding mode of delivery, the importance of how the birth plan is managed and the personnel´s standpoint regarding fear of childbirth. These categories can be seen as parts of the themes of experiences which made the fear of childbirth easier or which made it worse.

Today around 28 000 women originally from countries where FGM is practised, are living in Sweden. Many of them are at childbearing age which means that knowledge about FGM and its consequences is of outmost importance during delivery. The aim of this study is to describe current research on how to manage the delivery, regarding deinfibulation and the following stitching as well as the risk of complications when the labouring woman is mutilated. This review of literature is based on 12 scientific articles published between years 1989 ? 2005.

This final thesis aim to create a support that can decrease the uncertainty when planning the cable drum flanges lines that produces cable drums in the interval 100 to 320cm in diameter at Vida Packaging in Hestra. The purpose attains through finding an optimal batch size that minimizes the total storage cost and order prime cost, without degenerate delivery capacity to the customer. Through survey the sale and stock balance development during 2005 and 2006 for cable drums in Hestra and give alternative suggestions how to plan the production after installing a new cable drum flanges line. The study also explores different ways of working during product change in existing nailing line, to minimize the order prime cost. Vida Packaging in Hestra is a part of the Vida group, which is Sweden?s largest privately owned sawmill group with seven sawmills placed all around southern Sweden.

International Marine Group, IMG AB, was established in year 2000, and became the parent company of the three sister companies, Momec AB, Isolamin AB and Premec AB. The IMG ? group supplies complete marine/offshore interior accommodation and tailor-made system supplies to the Building/Industrial sector. With a starting point to develop IMG AB?s logistic and distribution the company has decided to survey the present logistic at their subsidiaries, mainly concentrated on the goods for delivery.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

The aim of this report is to investigate how the work handling at the department for arriving goods at EFG in Tranås is working, as well as how it could be improved and made more effective. EFG is a corporation who process and sell office furniture. The company is working with a project concerning delivery precision, the subject is therefore particularly interesting from the perspective of delivery accuracy. The number of orders has increased notably during the fall of 2005 and the spring of 2006. This has led to new demands at the department for arriving goods and the topic is as a result of that important also from this point of view.Interviews and investigations have been conducted at location since no written material earlier has been made in the topic.

This paper is a degree project on the C-level, 15 points at University West, Department of Business and IT dept. Informatics. This study is about agile methodology and its impact on IT projects. Requirements management is a process within an IT project, where customer has certain requirements that must be met by an IT system. The difference between the traditional and agile development is in the requirements management process and it can cause problems in a project.

Arbetet syftar till att undersöka standardiserade strukturer för implementeringen av virtuellt byggande i ett generellt berganläggningsprojekt. Virtuellt byggande är ett samlingsnamn som beskriver metoder med centrum runt objektsbaserade informationsmodeller. Informationen som dessa modeller ska innehålla kan beskrivas med hjälp av en standardiserad struktur som kallas Information Delivery Manual, IDM. En IDM inne-håller beskrivningar av processen, delaktiga aktörer och deras behov av informationsutbyte. För att försöka implementera denna struktur på ett berganläggningsprojekt användes teorin axiomatisk design.

During the last decade, the construction industry has focused on improving and optimising its production process. The construction industry is now facing larger changes regarding efficiency in their supply chain for the next decade. Many companies are now trying to optimise its supply chain together with its supplier. JM AB, which is one of the biggest construction companies in Sweden, is looking at different options to improve its own logistics together with their suppliers. One option is to use a terminal between JM and the suppliers to solve problems such as quality, custom service and inventory for the in production.

All products will eventually end up as waste, which in a sustainable society has to be handled in an efficient and environment friendly way. This report focuses on waste fractions meant for combustion, often difficult to characterize. However, more homogeneous fractions that are treated biologically are also discussed.The study concerns the region of Borås, Sweden, where the waste plant Sobacken has provided a good starting point. On this site, fuel to the Energy-from-Waste plant of Borås Energi is prepared and the biological waste is treated through anaerobic digestion.One important part of the study has been to collect experience-based knowledge from the technical staff at Sobacken and Borås Energi. This information was compiled into an overview of wanted and unwanted fractions to the preparation plant and the boilers respectively.

The purpose of this paper is to examine the correlation between hotels, their brands and the frontline staff within the industry. A competitive, international environment characterizes today´s hotel industry where brands are one of the strongest sources for a successful position amongst competitors. In the brand delivery, the front line staff is of utmost importance since they in many ways incorporate the brand values and the projected identity of the hotel. Hotels can use a variety of ways to communicate the brands identity to the front line staff in order to create the desired brand behavior, some more effective than others. At the same time the Swedish hotel industry, as many other, is characterized by a high percentage of staff turnovers.