Resin-top disease is a rust fungi that occurs both as a host alternating form, Cronartium flaccidum G. Winter., and as a non-host alternating form, Peridermium pini Pers. The host alternating form can use a variety of hosts but the most commonly used species in the boreal forest is Melampyrum sylvaticum. In Scandinavia the Resin-top disease infect Scots pine, Pinus sylvestris L. The fungus infects the needles through the stomata and then grows through the branch to the stem where it strangulates the vessels transporting water and nutrition to the treetop, which kills the top.

Background: There have been doping usage as far back as as ancient Greece and around the early 1900s started the doping we have today. In 2008 it was 22,000 men aged 15-54 years old who had any kind of experience with doping in Sweden. The problem of doping use are all over the world and to overcome this problem, we need to work across borders.Objectives: The purpose of this study is to investigate whether there is any connection between the use of supplements and attitude to doping. The study is based on the questions: is there any connection between the use of supplements and positive attitude to doping? is there any connection between the use of supplements/doping substances and high training frequency? and is there different use of supplement/doping substances between girls and boys?Method: A survey in form of a cross-sectional study and a waiting room survey was conducted with 63 respondents of whom 57,1% were women.

The objective was to examine the frequency of unwanted behaviors in the Swedish feline population and what factors in the environment, inheritance and past life that have an influence on the frequency. SLU?s web poll generator was used to create a web poll which insinuated that it was a poll with objective to make an inventory of the Swedish feline population. I wanted to avoid that only owners to cats with unwanted behaviors answered the poll. The web link to the poll was sent to SLUs students and posted on Internet forums for people interested in cats.

This paper investigates the grammatical construction intransitive motionconstruction with GOAL as it is used in Swedish (Swe. intransitivrörelsekonstruktion med MÅL).I examine in which ways the construction is productive, i.e. thepossibility to use the construction with new verbs as well as withordinary motion verbs with new functions. The notion of productivity isbased on the construction?s type frequency and semantic openness(Goldberg 1995, 2006; Barðdal 2008; Bybee 2010).

Development and construction of an electronic Breakout box is the main work for this thesis. The box is a part of a test system for the component Fuel Flow Transmitter and should convert signals to be suitable for a frequency counter. A previously constructed Breakoutbox for this purpose is being old and needed to be recreated. So SAAB Aerotech, Aircraft services, the company for the thesis work wanted to construct a new, more sustainable Breakoutbox adapted to a more modern technology. The signals to the box comes from the transmitter and should be converted to suitable signals for a frequency counter so it can show pulse and time difference between the signals.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

Forests affect its visitors in many positive ways. It is the acknowledgement of this fact that has prompted an EU-LIFE sponsored project entitled ?Urban forests for mankind?. It aims to lure or welcome more citizens near urban forests to experience nature in its many forms. In Sweden, three municipalities have decided to take the lead in this effort. Huddinge district, Haninge district, and the Royal Djurgården Administration in conjunction with The National Board of Forestry in Mälardalen are in the midst of this four year project (2001-2005).

The milk production has developed rapidly the last years. The milk production per cow is increasing and the production units are larger with an increasing number of animals and a decreasing number of workers. Many milk producers invest in automatic milking systems (AM) to meet this change. In these systems the cows can voluntary decide milking frequency and usually the milking frequency are higher than two times per day. But how does the milking frequency effect the composition of the milk? The aim of the present study was to study the effect of milking frequency on the milk composition and the milk fat quality.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

The present study examines in a longitudinal perspective earlyspeech development in children with partial isolated cleft palate comparedwith children with unilateral cleft lip and palate and children with typicaldevelopment. The groups were compared regarding consonant production at18 months, 3 and 5 years. The results showed that speech development inchildren with isolated cleft palate did not differ significantly from that inchildren with typical development except for production of oral fricatives at18 months. The children with unilateral cleft lip and palate had significantlymore speech deviations at all ages. The children in both cleft palate groupshad significantly higher hearing thresholds at all ages.

Emotron is a company specialised in developing, producing and marketing equipment to con-trol, monitor and protect processes and machinery driven by electric motors, with an applica-tion focus. Examples of uses for their products are fans, pumps, lifts and cranes.The project is to look at Emotrons end of line test. The company has seen that at the final test-ing there is a bottleneck that restricts the outflow and prevents an increase in the number of tested products.The purpose of this project is to review how Emotrons end-of-line test works today and if there is a possibility to make the test more efficient in such a way that the quality is not at risk, while increasing the outflow of tested products.The projects first step is to look at and analyse what is causing the bottleneck at the end-of-line. When the analysis is complete, the next step is to review whether there is a possibility to solve the bottleneck and if so in what way can this be done. Emotrons most overall objective of the project is to increase the outflow of the number of tested products without jeopardizing the quality.An analysis has been made on frequency inverters, soft starters and shaft power monitors.