The purpose of the project was to exam steams ability to sterilize carrots infected withLactobacillus plantarum. The project was a cowork with Brämhults Juice AB. They hadobserved an increase of Lactobacillus in the production of carrot juice during the summer. Tokeep the flavour of fresh fruits, the juice is treated carefully with heat. This means that thejuice only stays fresh for a few days, around two weeks for an unopened package and threedays for an opened package.In an attempt to remove the remaining Lactobacillus of the carrots, steam is tested as an extrastep in the production of juice.

From embankment dams is something that has long been noticed and given rise to different questions. The most serious question is if the sludge is a result of inner erosion through the dam, and thus consists of material transported from the dam. Concerns have also been raised whether the sludge could interfere with the systems drainage capacity and thereby lead to high pore pressure in the dam, or if the measurement of seepage is disturbed, as the measuring is usually made via Thomson weirs, which could risk being blocked. The result of this investigation shows that the sludge is a result of the oxidation of iron by iron bacteria, and to the greater part consists of these oxides as well as the bacteria?s own structures. The iron oxidizing bacteria, FeOB, oxides ferrous iron to ferric as a part of their metabolism, and thereby create large quantities of iron(oxy)hydroxides.

Stress and burnout is a common healthproblem among different workcategories today. The aim of this study was to investigate possible presence of stress and burnout among radiographers and if there was a connection to number of years in the profession. Maslach Burnout Inventory was used as an instrument to investigate the possible presence of  burnout, supplemented with questions about stress. The instrument contained a total of 33 questions and was handed out to two hospitals in south of Sweden with a total of 51 respondents. The study showed that the most stressful situations arose due to workload, negative stress, bad working environment and high time pressure.

To be able to measure high-surge voltages and transients with short rise times youneed measuring instruments with a high sampling frequency and large Bandwidth.These surges and transients occur primarily at lightning but can also occur at forexample at connecting errors at an electrical switch-gear. This report describes thework with finding two solutions for measuring and log data from these surges andtransients. One temporary solution where a measurement program has beendeveloped. A second solution where different company solutions have been analyzedto decide which fits best. For these measurement solutions two solutions for bringingdown the voltage has been used.

Immune-mediated haemolytic anaemia (IMHA) is an immune-mediated destruction of erythrocytes and is one of the most common haematological diseases diagnosed in dogs. The haemolysis is a type II immunoreaction and is initiated by IgG or IgM antibodies or complements. This retrospective study includes 63 dogs suffering from primary IMHA. The study was based on information from records from the Swedish University of Agricultural Sciences, Department of Small Animal Clinical Sciences in Uppsala and from the Animal Hospital in Strömsholm. The aim of the study was to evaluate the progress of the disease, treatment and the prognostic factors in different breeds, gender and age. Following criteria were used for the dogs to be allowed in the study: the dogs were diagnosed with anaemia, the anaemia was regenerative and autoagglutination and/or spherocytes were seen in the blood. About 50 % of the dogs in the study were diagnosed with IMHA within 2-6 years of age. Wire-haired dachshund was remarkably one of the most common breeds in this study together with Cocker and Springer spaniel.

The purpose of this study was to describe how adolescents aged 12-18 years with inflammatory bowel disease experience their illness and what coping strategies they use to manage their illness and improve their wellbeing. The method used was a descriptive literature study, and the result of the study included 15 scientific articles. Our results showed that IBD affected the adolescent?s everyday life and social life with friends, family and activities. The adolescents also reported that they experienced a feeling of vulnerability, altered body image and that they saw themselves as different from healthy subjects.

In this project the focus has been on the system for recombination at Oskarshamn 2. The recombining systems have on several occasions switched paths due to low pressure before the last ejector that?s feeding the recombiner. Of the mentioned reason, events and several measuring points have been analyzed in this report since the installation of the recombining systems.In order to prove theories and demonstrate what may be the cause of this problem, we used heat balance calculations by the program Probera. Using the program, we can demonstrate that the catalytic process does not reach the desired temperature with the amount of combustible substance.

Selenium (Se) is an essential trace element that is involved in several physiological functions in mammals. Mostly, Se is bound to proteins, many of them with enzymatic functions. A group of seleno-depending enzymes, glutathione peroxidases (GSH-Px?s), are important as antioxidants and protects against free radicals. The activity of GSH-Px is strongly regulated by Se storage in the liver.

To be able to measure high-surge voltages and transients with short rise times youneed measuring instruments with a high sampling frequency and large Bandwidth.These surges and transients occur primarily at lightning but can also occur at forexample at connecting errors at an electrical switch-gear. This report describes thework with finding two solutions for measuring and log data from these surges andtransients. One temporary solution where a measurement program has beendeveloped. A second solution where different company solutions have been analyzedto decide which fits best. For these measurement solutions two solutions for bringingdown the voltage has been used.

 Genotyping can be used to link genetic variation among individuals to certain diseases or conditions. Some known disorders and states that are dependent on single nucleotide polymorphism (SNPs) are lactose intolerance, venous thrombosis, hereditary hemochromatosis and the difference in sensibility among people to metabolise drugs.In this project a new kit, TaqManÒ Sample-to-SNP KitÔ for extraction of DNA and preparation of the extract for genotyping with real-time PCR and allelic discrimination, was evaluated. QIAamp® DNA Blood Biorobot® MDx Kit was used as the reference method.The purpose of the comparison was to find a method that makes DNA extraction from blood samples cheaper and faster, but with the same reliability as the reference procedure.The results of the evaluation showed a complete agreement of the genotype results between the methods tested, which means that the new method was as reliable as the reference method. The costs of reagents and material would be reduced with 52% if the new method is adopted, that alone would result in a cost reduction of 144 000SEK a year with a sample volume of 650 samples/month. The time for DNA extraction would also be reduced with the new procedure. .

The project group is participating in a measuring project that is a cooperation between CIT EnergyManagement AB, the Measuring unit of Chalmers and College of Dalarna.The results from the measurementswill be put together and presented in a brochure.When designing the brochure a great deal of planning has been made how to attract the targetgroup.To make the contents of the brochure more attractive, which mainly will contain text, a lot of imageswith a symbolic substance have been used. To keep the brochure together it has been divided into fivechapters that each has been given one specific colour. The colours are consistent on initials, headlinesand images.At the moment the results of the measurements are not yet ready and the text for the brochure is notpossible to complete now. This project is expected to finish in the fall when all the measurements havebeen compiled..

Together with NCC and Sweco we measured the air-flow on a semi-detached house in Jönköping. When a pressure measurement is made, the house gets exposed to over- and under pressure. This is done in order to examine the houses climate shell. The climate shell of the semi-detached house we tested exceeded the required air thickness in BBR-2002, hence, measures have to be taken.This report also displays the importance of building air thick houses and what consequences a non air-thick house can have for the ones residing the house. A discussion of different measures is on for the addressed problems with the flow-measurement and the alternative construction-solutions.Furthermore we have described in this report of how to account for the performance of the air pressure, what kind of equipment we used and how we came up with the results.

The running of gas turbines with low emissions causes high pressure pulsations to arise in the combustion chamber. These pulsations are high amplitude sound vibrations. At some frequencies these are harmful to the gas turbine. Hence these pulsations are monitored to avoid operating conditions where pulsations are specifically harmful. It is necessary to expose the system of known pulsations to verify the functionality of the monitoring process.

Due to higher standards of living around the world, greater industries and larger infrastructures causes an increase of the global energy consumption. This harvest of energy puts a great stress on the global environment. With this development, it becomes increasingly important to utilize energy resources in the best possible way.Fans are components that are often used in the industry and in households. A common problem is that the fan is oversized. An oversized fan causes an excessive flow, which has to be adjusted in order to achieve the correct flow.

Earlier investigations showed that damages on timber from feeding rolls could be within the lower classes of damage according to VMRs classes. Knowledge about differences in productivity between kind types and aggressive types of feeding rolls is necessary because it should influence the question about damages on timber caused by different feeding rolls. In this study the production and timber damage in a harvesting head were evaluated at three levels of pressure (8, 10 and 14 MPa) on the feeding rolls, and with three different types of rolls. One type, the rubber cushioned steel plate roller had 10 mm studs and rubber damping, one ?middle? type made of solid steel with 14 mm studs, and one aggressive type, also made of solid steel with 18 mm studs.