The equine hoof is often manipulated in purpose to achieve a better stride or to reduce the weight on damaged tissue. The living tissue in the hoof can?t store energy as glycogen and is therefore depending on a continuous supply of glucose for its energy production. The purpose of the study was to determine if wedging (i.e. elevating) the heel could influence the hooves glucose and lactate consumption/production. Five standardbred horses were trained to trot on a treadmill without getting physical or mentally tired.

This thesis describes a method of measuring axial magnetic leakage flux in an operational hydropower generator. Axial magnetic leakage flux is the magnetic flux at the ends of a rotating generator, which goes through the stator parallel to the rotor axis. This flux can cause circulating currents in the stator iron, giving rise to losses, and can in the worst case overheat a generator, causing it to melt down. To measure the axial flux, and how it affects the generator temperature, a measurement system was constructed on behalf of Vattenfall. The system consists of search coil sensors and a signal-processing unit with amplifiers and active filtering.  To confirm the behaviour of the axial leakage flux and the functionality of the measurement system, a test installation was made.

Blood-borne infectious diseases such as Human Immunodeficiency Virus (HIV)and Hepatitis C Virus (HCV) spread when the addicts share needles and injecting equipmentwithin contact networks. A quantitative cross-sectional study was conducted in Winnipeg,Canada in December 2003 - September 2004. Through a special questionnaire, respondentswere asked to answer questions about themselves and about their contacts, about relationshipsand how they shared syringes and other injection supplies. Blood tests were used to identifywhether they carried any blood-borne infectious diseases. We selected some variables from theoriginal data set.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

The purpose of this scientific essay is to evaluate if a continuous glucose monitoring system is something that can benefit Swedish animal health care. The study investigates if it is medically possible to use continuous glucose monitoring systems on dogs with an apparatus attached to their bodies. Furthermore, I try to establish whether this is possible in practice and how it could be done. The keywords used were diabetes mellitus, insulin, continuous glucose monitoring, blood glucose monitoring, dog, pet owner and animal nursing care. Furthermore, I wanted to find out if this system could be an alternative to currently established methods to measure the patient?s blood glucose level.

Blekinge Hospital suffers from a budget shortage of 100 million SEK, while the government now requires that hospitals will no longer be running a deficit. Blekinge Hospital will then use their limited resources to survive in the future and the activity must be enhanced in order to keep costs low without having to lay off personnel. The idea is that the organisation should be more efficient with a more efficient resource usage. Performance measurement systems are important tools for achieving the policies set out within an organization, measuring and evaluating performance is a way to see where improvements in efficiency may be necessary in the business. Balanced Scorecard (BSC) is one of several measuring systems, where the focus is on measuring non-financial performances.

The content of the following report is the summarized result of three students thesis at Blekinge Institute of Technology in co-operation with Water Jet Sweden AB. This report will give the reader a description of principles how to measure the abrasive mass flow in a waterjet cutting system. The work began with a visit to Water Jet Sweden AB to get a closer look at the problem. When the analysis of the problem was done the criteria were defined in the form of demands and desires. The main task of the criteria was to guide the search for the solution.

Blood-borne infectious diseases such as Human Immunodeficiency Virus (HIV)and Hepatitis C Virus (HCV) spread when the addicts share needles and injecting equipmentwithin contact networks. A quantitative cross-sectional study was conducted in Winnipeg,Canada in December 2003 - September 2004. Through a special questionnaire, respondentswere asked to answer questions about themselves and about their contacts, about relationshipsand how they shared syringes and other injection supplies. Blood tests were used to identifywhether they carried any blood-borne infectious diseases. We selected some variables from theoriginal data set.

This study was performed in collaboration with Moelven Skog AB, Örebro district. The purpose of the study was to review existing literature in order to describe the current status of harvester based measurement technology as the way to provide information for calculating payment to the forest owners. In addition to this, a short survey was conducted to find out how a switch to harvester based measurement would affect the administrative workload on timber purchasers working for the district. The literature study shows that the harvester measurement technology is ready to use if it is combined with well-established routines for control of the harvesters, methods for automatic quality indexing of the timber and ways of creating pricelists specially adapted for harvester measurement. Pricing each stem seems to be the most promising method. Stem pricing has several benefits.

AbstractIntroductionOccurrence of bacteraemia and fungemia is a serious condition with high mortality and the incidence is increasing worldwide. The aim of this study was to survey the occurrence of bacteria and fungi in blood cultures from adult patients domiciled in the county of Gävleborg during one year and also to calculate the incidence and mortality in the same geographical area.MethodThis is a descriptive epidemiologic study, based on all episodes of blood cultures analyzed at the Microbiology laboratory, Gävle hospital during 2005. Patients from 20 years of age, domiciled in the county of Gävleborg at the date of drawing the blood culture, where included in the study. Criteria of exclusion were negative blood cultures and cultures which were classified as contaminants.ResultsAltogether there were 4 564 blood cultures analyzed, resulting in 524 (11 %) positive cultures for further study. There were 442 patients (48 % women) involved in 499 episodes with confirmed bacteraemia or fungemia.

Obese horses with insulin resistance are often also afflicted with laminitis. Horses with these symptoms are given the diagnosis equine metabolic syndrome (EMS). Signs of insulin resistance are excessive accumulation of adipose tissue on the neck, around the withers and on the dorsal area of the hindquarters. Insulin resistance means that the function of insulin is defective and does not stimulate glucose uptake by the cells in the body in the correct way. This will result in an increased insulin release.

För att uppfylla kraven på kvalitetssäkring samt evidensbaserad praktik måste hörapparatanpassning utvärderas objektivt. Syftet med studien är att redovisa nya forskningsresultat gällande objektiv utvärdering av hörapparater med hjälp av hörselgångsmätning, samt att beskriva en modern, evidensbaserad och kliniskt användbar metod för de vanligaste typerna av elektro-akustiska hörapparater med olika typer av insats. Studien består av en allmän litteraturstudie som beskriver tidigare rekommendationer samt en systematisk litteraturstudie där nya rön gällande metodiken vid hörselgångsmätning presenteras. Utifrån hörselgångsmätningens olika delmoment undersöker studien vilka konsekvenser de nya rönen har för utförandet vid hörselgångsmätning. I slutsatsen presenteras en metod för objektiv utvärdering av moderna hörapparater..

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.