AbstractThis bachelor thesis has been assigned by the company ACG Nyström, Borås. ACG Nyström is working in cooperation with a Swiss company named Jentschmann AG. Jentschmann is a manufacturer of ultra sonic welding machines which ACG Nyström is marketing in Scandinavia and the Baltic States. On behalf of Jentschmann AG the company has the aim to introduce the ultra sonic welding technique to new companies.The aim of this thesis is to compare traditional sewing machines with ultra sonic welding machines within two textile areas, protective clothing and outdoor living.Two investigative questions have been formulated for this purpose: what are the differences between a sewing machine and an ultra sonic welding machine? Is it possible to replace the sewing technology with ultra sonic welding? These stand as guidance for this paper.To gather knowledge interviews, literature studies, and tests on two different ultra sonic welding machines were performed.

Subclinical mastitis (SCM) is a well-known problem in the dairy sector, where it causes severe economic losses mainly due to reduced milk production. This is a problem not only in the western world but also in developing countries. Surveys from different developing countries have shown a SCM prevalence of 52.4 ? 88.6 % at cow level and 26.7 ? 63.2 % at quarter-level. To combat mastitis is important to optimize the milk production of the cow.

We have different kinds of signal processing everywhere around us in our everyday life, in our cellphones, when we are listening to music, watching TV etc. This makes signal processing a very interesting and important technical area, where the demand of skilled engineers sets the limit of what is possible.Working with signal processing requires in-depth knowledge in areas such as mathematics, physics, electronics, and other related areas. For this, it has traditionally been demanded by a talented developer to also master the advanced programming languages such as C / C + + and Assembler.This has begun to change; today there are several companies that offer graphical development environments for signal processing, environments where programming skills are not needed anymore, and the focus can be on signal processing instead.The goal with this project is to build a corresponding graphical development environment to reach an understanding of what is required of these systems, and also to grasp what opportunities that are available within graphic programming. Inspiration for the work has partly arise from some of the tools available on the market, and partly from previous theses that have been written about graphic programming.The challenge lies in creating a program that can execute signal diagrams in real time from given signal blocks, and be able to handle feedback loops in an efficient way and to do so at the lowest "cost" in terms of clock cycles as possible. This should also be compared against to code, compile and run a complete signal diagram directly.To increase the usability it should also be possibility to externally manage in real time the parameters of the signal diagram during execution.The interface is a separate program, which is to some extent similar to Matlab Simulink, where a signal diagram is drawn up graphically by connecting wires between different signal blocks.

I den allmänna debatten om revisorer diskuteras bl.a. revisorns oberoende och hur det kan påverkas av revisorns roller som rådgivare till och granskare av ett företag. Vi ville undersöka inom vilka områden revisorn bidrar med rådgivning och få en uppfattning om hur detta eventuellt kunde påverka oberoendet mellan revisorn och ett nystartat företag. Vi valde att undersöka nystartade företag då vi inte funnit några tidigare studier på just den här kombinationen, revisor/nystartat företag.I vårt syfte att undersöka revisorns roll i nystartade företag har vi tagit reda på de vanligaste problemområdena, som nystartade företag upplever, och i vilken mån revisorerna hjälpt till som rådgivare. Undersökningen genomfördes med hjälp av intervjuer där respondenterna bestod av tre revisorer och ägarna till tre nystartade företag.

The review of Integrated green spaces in urban areas ? A case study of inner Brisbane highlight the significance of addressing characteristics, qualities and landscape values in our outdoor environment. The importance of green spaces to the wellbeing of people in the city and the ecological, social and cultural values they carry are widely recognised in the field of urban and regional planning. At the same time population growth, climate change and urban development put planners and scientists in a challenging position where new solutions must be put on the agenda in order to accomplish sustainability. Open space strategies, collaboration between stakeholders, public participation, learn from earlier failings and a ?value-led? approach facilitate the managing of open space. Brisbane is located in the fastest growing metropolitan region in Australia. The city´s open space landscapes offer cultural, geographical, recreational, social and scenic amenity assets, which make a major contribution to the regions identity they a wide world known for.

The population growth and urbanisation in low-income countries bring issues of poor living standards and miserable sanitation conditions onto the agenda. If well-functioning waste management systems were developed, this could master some of the problems. The already existing local informal waste handling system that is common in many low-income countries, needs to be developed with proper sorting and composting solutions to decrease the environmental burden and improve the overall situation in the dense cities. This master?s thesis project is performed with the intention of developing functional decentralised waste management units in the city of Pune, India.

Wind is used as an energy source all over the world. To be able to use this effectively, there is a need for as good forecasts and forecast models as possible. One of these models is Coupled Ocean/Atmosphere Mesoscale Prediction System (COAMPS®) that is used to calculate short time forecasts. This model is used here to calculate wind speeds at two different areas in Västra Götaland, Bengtsfors and Vänersborg. There are also wind measurements with SODAR stations for these areas.

In December 2008 the municipal council in Nybro, decided that the municipality shouldreduce the budget for food service. The budget should be reduced by 2 100 000 SEK.They decided that the children- and education committee, and the care committee would haveto lower their budget with 1 264 000 SEK respectively 636 000 SEK. The change have to bedone under two years, 60 % should be done under 2009 and 40 % under 2010.As a result of the decision, many kitchens have to become kitchens that only serve food, notcook it. This will result in preschool staff and nursing staff take over some of the tasks fromthe kitchen staff. The municipal council also decided that entrepreneurs could take over one(later two) cooking areas.A kitchen that serves food means that there isn?t any cooking involved.

Biogas is a gaseous fuel, rich in methane, produced through a biological route in an anaerobic digester. A gas engine generates combined heat and power, which can be used at the farm to reduce energy cost. The process also generates a digestate, with better utilization of nutrient compared to cattle manure. The aim of this study is to analyze the profitability of a farm-scale biogas plant for combined heat and power (CHP) at Wapnö. Wapnö is an agriculture company located in the southern part of Sweden.

This master thesis is an early concept development project about using plastic films and sheets as materials for shaping openings for Tetra Pak packages. It is also a technical introduction highlighting the areas of importance for the development of plastic film and sheets openings. The master thesis has been carried out as a co-operation between Chalmers University of Technology, KTH Royal Institute of Technology and Tetra Pak AB.The master thesis study presents an introduction that gives an understanding of the technical complexities and design possibilities of using thin plastic films and sheets in liquid carton openings. The knowledge is then transferred into five design concepts which points out the areas of opportunity. The technical introduction is widespread and extensive covering current packing trends, the liquid carton package and openings, thermoplastic material properties, and thin film and sheet manufacturing and shaping.

The Healthcheck is an evaluation of the 2003 years reform of the Common Agricultural Policy (CAP). When the Healthcheck of CAP is decided, most likely in the beginning of 2009, there will be a discussion about how CAP will appear in the next budget period 2013. One main question in the Healthcheck is how the farm support will be designed. A suggestion that has arised is if todays addition amount for dairy- and beef production should be transferred to the fundamental farm support. In this exam theses calculations has been done in created typical farms in every Swedish support region for cereals-, dairy- and beef production.

A range of public health and animal welfare problems has been shown to be associated with free-roaming dogs. With a high density of free-roaming dogs and with a major tourism industry, Samoan tourists are likely to be influenced by the presence of the dogs. The tourists are mainly from the Oceanic region; with New Zealand and Australia as the biggest contributors. The aim of this study was to examine the potential impacts of dogs on visitors to Samoa. A questionnaire was handed out to 281 visitors all over Samoa, collecting opinions and information on visitors? experiences and behaviour regarding the Samoan dogs.

Large-scale land investments is not a new phenomenon, but increasing prices on food and agrofuels have inflated prices on land and has led to an enhanced interest in landinvestments from a range of different actors. The ProSavana project in the Nacala corridor in the Nampula province, northern Mozambique is a large-scale land investment with the purpose of establishing intensive commercial agriculture and is planned to be implemented this year (2013). The project is financed by Brazil and Japan in collaboration with the government of Mozambique. It is not quite clear how large-scale land investments affect the areas they are implemented in and how they can affect the possibilities for sustainable development in these areas. Both opportunities and problems can be observed within the social, economic and ecological dimensions of sustainable development.

Organisations and projects use CSCW/Groupware systems for collaboration purposes. These systems and applications are in many cases using a non-transparent GUI, witch is also hard to learn. This paper present a novel system that aims towards being transparent and easy to use. This system, called CollMX, will be evaluated and different ideas for future development will be presented.  The evaluation and ideas are generated by an empiric evaluation and research in different areas related to CSCW. The research does not only focus on the area of CSCW, but also extends towards the Web 2.0 and ideas about awareness..

 Date                   May 28, 2009Level                  Bachelor thesis in Business Administration/Information TechnologyAuthors             Jennie Andersson, Niklas Fridell, Visar HoxhaTutor                  Marie MörndalDepartment    HSTTitle                    ERP-solutions in small to medium sized enterprises ? possibilities and problemsSummary          ERP-solutions have penetrated the market for SME: s, offering the same advantages larger enterprises have enjoyed for years. For a significantly cheaper price, SME: s can nowadays acquire ERP-solutions and become more effective and increase their profit.  The authors have examined five SME: s in both the production and service company segment and have come to the conclusion that an ERP-solution would indeed benefit these companies in many levels but also induce certain obstacles the examined companies must overcome, both financial and organizational.Purpose            The purpose of this thesis is to examine if and how SME: s can become more efficient and developed and increase their profit by implementing an ERP-solution. Further, the purpose is to discuss which conditions that exists for the examined SME: s in order to implement an ERP-solution.Method            The thesis consists of a qualitative research where the authors have interviewed either the owner or employees at management level by using semi-structured interviews.