The purpose of this literature review was to describe if the nutritional balance of the fats, carbohydrates, proteins and fibers can lead to weight reduction and to improve glucos-/blood lipid for individuals with obesity and type 2 diabetes. The method used was a literature review. Twenty-two scientific articles were chosen, which were consistent with the study purpose and questions. The articles were selected based on searches in the Medline database by PubMed. The keywords used were type 2 diabetes mellitus, diet, obesity, comparative, fat, carbohydrate, low carbohydrate, high fat and saturated fat.

Most of the beef production in Sweden has been integrated with milk production. Since the 1990:s, the number of dairy cows has decreased. A specialised beef production has developed in purpose to compensate for this decrease. The consumption of beef have increased in the last decade, but the Swedish production has no followed this trend. In 2004, the percentage of beef self-sufficiency in Sweden was 60 %.

Due to recent legal enactments regarding carbon dioxide emissions, the car industry is facing higher demands. An effective way of reducing these emissions is to minimize the weight of the vehicle. This thesis constitutes a feasibility study on whether or not it is applicable for the car industry to utilize an inner floor structure comprising composite materials. The principal was the projectSåNätt, in which the main participant was Volvo Cars Corp. In consultation with a reference group, consisting of delegates from the industry and KTH, a specification of requirements was produced.

Active immunization against gonadotropin-releasing hormone (GnRH) is an alternative to surgical castration of male pigs to avoid boar taint. The aim of this study, including 128 pigs, was to evaluate the effect of a GnRH-vaccine Improvac® on performance and on social and sexual behaviour. Male pigs were assigned to three treatments; surgical castration at four days of age, immunization against GnRH and no castration. Vaccination was performed eight and four weeks before slaughter. Surgically castrated male pigs had significantly lower daily weight gain during the suckling period than entire male pigs (235 vs.

Background: Obesity surgery is the only technique that has proved to have a long-lasting effect on weight loss. Operation is not a solution but rather a lifelong involvement for the person. To loose a lot of weight means a big adjustment for both body and mind and the operated person may need support, advice, information and encouragement. Aim: The aim was to describe how a person, operated for obesity, can be supported in order to reach improved health pre- and postoperative. Method: A systematic literature study was made which resulted in 18 scientific articles that have been reviewed.

This paper aims to describe the variation and develop a method to control the production for the product Metropol Kaktus from the snuff developer Fiedler & Lundgren. We are going to use the requirements from the product specifications as limits of the expected quality when we present methods to control the process. One method attempts to control during the process and the other attempts to maximize the number of products with strived quality before the process starts. Metropol Kaktus is a product produced with high quality, the mean weight is 20,023 gram and this is very close to the weight, 20 gram, which is reported in the product specifications. The variation in weight variable is less than what is reported in the specifications and the minimum weight is over the limit set by Livsmedelsverket.

AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

As trucks are getting more and more advanced, information about their weight has become a key factor for controlling them in a more fuel efficient and safe manner. Knowing the mass of a heavy duty vehicle in real time has been a difficult challenge for the truck manufacturers. With the processing power for electronic control units in trucks steadily increasing, more advanced algorithms for calculating the mass has been developed, but at the moment there still is a wish for better performance.Since there is a lack of good information regarding the external forces acting on the vehicle, forces that depends on the slope of the road, foundation of the road and the wind, the methods have to be able to disregard these. Such an approach, based on an indirect least square solution, has been evaluated in this thesis. The results have been promising and based on these a recommendation about further evaluation has been made..

Tomo Hugglink (TOMO Skog) is an innovation for harvest and transport of biofuels. The system consists of a truck, a chipping unit and crane mounted on a link and a wood chip trailer. The system works in such a way that the chipping unit is disconnected and placed on the site and wood chips are loaded directly into the wood chip trailer.The aim of this study was:- To examine the performance of the TOMO Hugglink system under different conditions such as the size, placement and quality of the pile.- To calculate the cost per raw ton for two vehicle combinations at different transport distances and to examine the effect of a reduction in set-up time and an increase in load weight.- To identify possible improvements with the TOMO Hugglink system.A time study was conducted within the thesis work to make it possible to determine production and time consumption. In the subsequent economic analysis the cost per tone at different transport distances was calculated for two different lorry concepts. Furthermore the effect of a reduction in set-up time and an increase in load weight was calculated.Under current conditions the utilization of the chipper is low and only 29 % of the total system time is occupied by chipping.

Due to recent legal enactments regarding carbon dioxide emissions, the car industry is facing higher demands. An effective way of reducing these emissions is to minimize the weight of the vehicle. This thesis constitutes a feasibility study on whether or not it is applicable for the car industry to utilize an inner floor structure comprising composite materials. The principal was the projectSåNätt, in which the main participant was Volvo Cars Corp. In consultation with a reference group, consisting of delegates from the industry and KTH, a specification of requirements was produced.

AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

Bachelor thesis, Trolley Innovation Project, has been unique in the sense that it has been carried out over the borders of Sweden. Iacobucci S.p.A, located outside of Rome in Italy is one of the largest manufacturers of interior equipment for aircraft in the world. With approximately 30% of the market Iacobucci S.p.A is one of the world's largest manufacturers of catering trolleys.The aim has been to produce a new competitive catering trolley for the airline industry. With customers and users in focus, the project team found that weight, ease of use, ergonomics and design were important aspects. Having a low weight of all the interior is particularly important when there is lots of money for the airlines to save in reduced fuel costs.

The purpose of this study was to investigate women's experiences of pain, bleeding,to discover the fetus, hospitalization associated with medical abortion at home and toexplore differences in experiences between different groups of women, as age orprevious childbirth. The study was conducted at two gynecological clinics in Uppsalaand in Stockholm. A questionnaire was distributed and analyzed using a quantitativeanalysis method. The response rate was 30 %. Most women were satisfied with thepain relief given to them from the hospital.

When beef calves are weaned abruptly at 5 to 6 months of age this triggers a strong stress reaction, since the animals have not yet untied the bonds to their mothers or stopped suckling. This is displayed as extensive vocalization and restlessness. Attempts to diminish the negative effects of weaning on sucking calves have been showing varying results. The study presented here emanates from the observation that when calves are weaned without human interference they are only prevented from suckling, but are still allowed to have social contacts with their mothers. The hypothesis was that calves weaned in two steps would be calmer, gain more weight, and be healthier than animals that were abruptly weaned. To investigate this, 15 calves where weaned in two stages (Group 2), by fitting the calves with nose tags that prevented them from suckling during 5 days prior to the separation of the cows and calves.

Twenty-four calves, which had not grazed previously, were divided into four groups. They were subsequently inoculated orally with either E. alabamensis oocysts, O.ostertagi/C. oncophora larvae, or both. One group remained uninfected and was used as a control.