Stump biomass is energy rich and stump harvesting for use as fuel become more and more interesting in Sweden. Swedish Forest Agency (2009) has estimated that stump harvesting in Sweden would respond to an annual energy supply of 57 TWh/year. However, stump has not been recognized as a bioenergy resource in Sweden. Suitable methods for pre-treatment of stump are probably of great importance to make it accepted as fuel. It is therefore rewarding to carry out an investigation in this area for stump. This report represents results from a diploma project, which was aimed to develop a fixed bed reactor for experimental study of biomass torrefaction, followed by TG analysis and kinetic modelling employing Ozawa method and different kinetic models including one-step and three-pseudo-component models.

In this study, the effects of using fine milled cassava stems as an additive in biofuel pellet production was compared to the effects of refined starch addition. The bulk biomass fuel raw material, to which the additive was added, was a blend of spruce and pine sawdust. An experimental design in the factors cassava/starch content, moisture content and material temperature was used. Measured responses were pellet bulk density, pellet durability, amount of fines, pelletizer motor current, pellet temperature, die temperature and CV for pelletizer motor current (a measure of process stability). Each response was modeled by multiple linear regression (MLR).

An increasing demand for wood products in China has resulted in large areas invested in fast-growing tree plantations of eucalyptus. Eucalyptus plantations are often associated with an intensive management including fertilization. By understanding the effects of fertilization and where in the ecosystem nutrients are accumulated a more sustainable forest management could be achieved. In this study, a nutrient budget including all biomass and soil components was created for Eucalyptus urophylla. The examined nutrients were nitrogen, phosphorus and potassium.

Today we have more game species than ever before in our landscape, both regarding number of species and number of individuals. The increasing number of wild species is an increase in game recourse for the countryside. The increase of game species, however, has negative effects on forests and agriculture land. The negative effects for forestry are damages on economic important trees, due to losses in production and quality. However there are ways to decrease the damage on valuable and important trees.

As demand for renewable energy is increasing rapidly, the market for biomass pellets is expected to continue to grow in the near future. Most of the new raw materials that are discussed for pellet production have one thing in common; the production costs will increase compared to using traditional raw materials such as sawdust and planer shavings. The aim of this thesis is to investigate to what degree increased use of new raw materials for pellet production will affect the general pellet prices in Sweden and to survey what plans Swedish pellet producers have concerning new raw materials. To investigate the raw material situation of the Swedish pellet producers an industry survey was performed. Literature studies were also made on previous research in the subject field. Calculations of the production costs for pellets were done for the raw materials sawdust, wet sawmill chips and energy wood respectively. New raw materials are already used by the large-scale pellet producers in Sweden.

The idea of using algae in different areas and exploring its possibilities is nothing new. Already in the early 1950s microalgae was explored as a possible food resource because of its high protein content. Lately there has been an increased interest in its potential for industrial use. Wastewater treatment is a possible use of algae since the algae grow well on the nutrients present in the water. This offers the possibility to grow algae for nutrient reduction and use the biomass for energy or animal feed since many alga species has a good nutritional value. Approximately 800-1000 m3 water is applied per 1000 m2 of greenhouse area during one season in a tomato production.

The purpose of this study was to estimate the removal of biomass in connection with thinning operations in young stands that are dominated by small diameter trees. The economy of such operations depends on the products generated as well as the performance of the harvesting systems. Conversion tables designed to predict the outcome based on harvesting method was another goal of this study. Removal of biomass affects the nutrient composition of the site. Therefore it is a purpose that this study will provide researchers with some variables that can be utilized when studying this aspect. Trees were harvested and divided into bunches based on diameter.

Bioethanol is one alternative energy fuel that can be produced from different types of biomass. Second generation bioethanol comes from fermentation of lignocellulosic material and can be seen as a more environmental friendly alternative as e.g. forest residues and agricultural by-products are used. To be able to use lignocellulosic biomass in ethanol production, it has to be subjected to different treatments first. In this study, aspen sawdust was used as lignocellulosic material.

Crop efficiency in utilizing available nutrients is an important factor in increasing produc-tivity and reducing the environmental impact of agriculture. Nitrogen is the nutrient that plants need in the largest quantity and wheat, along with maize and rice, is the world's most cultivated crop. In this work, the Nitrogen Use Efficiency, NUE, during the major growth period, HTP, of twelve different spring wheat varieties, were examined. The NUE was calculated as the product of uptake efficiency of nitrogen, UN, and the conversion effi-ciency of nitrogen to biomass, EN. The purpose of this work was to find if there are varietal differences in NUE and its components among the twelve varieties and to link a high NUE to specific characteristics of the varieties.

Successful forest regeneration is a prerequisite for sustainable forest management. Therefore, it is important to prevent browsing damage on the commercially important tree species Scots pine. In this study I have tested a new alternative way to increase the available amount of forage and increase the use of these resources by especially moose. The method is based on a slash treatment at harvest, where the accessibility of slash as forage is increased during final felling or commercial thinning by gathering the slash and putting the Scots pine slash on top of the slash piles. This study has compared the availability of forage, the amount of browsed biomass and the number of fecal pellet groups between conventional and slash treated stands after final felling and commercial thinning in southern Sweden.

As a part of the fight against the global warming the energy production needs to be more efficient and redirected towards sustainable options. One alternative is cogeneration, which means that electricity and heat is produced in one plant. The purpose with this survey is to examine if there are any commercial available combined heat and power techniques, based on combustion of solid moist biomass, which are suitable to small-scale applications. The technique must be able to produce between 2 and 10 MW thermal and the heat demand is a Swedish district-heating system. When already published reports had been studied, the Organic Rankine Cycle (ORC) was chosen as the most suitable technique.

This project aims to investigate whether algae can be used for biodiesel production in Italy. Algaes are a good option since they are fast growing and do not occupy arable land. The aspects that have been considered are growing, harvesting, which algae strain that is most suitable, extraction of oil, the production of biodiesel and where in Italy this could be possible due to climate. Cost? and energy calculations have been made to investigate if biodiesel produced from algae would be profitable. During the production of biodiesel there are several residues obtained. When the oil has been extracted from the algae, biogas is produced from the residual biomass by anaerobic digestion and then the electricity that can be produced is supplied to the production of biodiesel.

Hemp is an annual energy crop that fits very well in Swedish crop rotations. It is an interesting crop with many benefits, for example its ability to establish a large quantity of biomass in one year. Hemp is easy to grow and out-competes unwanted weeds through its aggressive growth pattern without the need for pesticides. Interest in growing hemp and other energy crops is currently decreasing, apparently because of high grain prices. These high prices give a higher net profit that we believe could partly cover the cost of hemp cultivation, while the hemp in turn would improve the crop rotation and thus repay its debts in the form of increased yields of other crops. The great disadvantage of hemp is the lack of knowledge about spring harvest of the crop.

Forest biomass is becoming an increasingly important source of renewable energy, and thereby the demand is increasing. There is currently 213 000 km of forest roads in Sweden that could be suitable for biomass harvesting. Harvest of biomass along forest roads both provides biomass and maintains the quality of the roads. Currently, the volume of biomass along roads can only be assessed post harvest, chipping and industry deliverance. As the decision of whether or not to harvest should preferably be based on more than experience, the TJ-method has been proposed. The TJ-method is a subjective method to quickly determine the dry matter quantity with the assessment being conducted from the roadside.

Since the 19th century the concentration of CO2 in the atmosphere hasincreased by 40 percent as an effect of the use of fossil energy sources.Increased concentration of CO2 will likely lead to increased temperature,changes in precipitation, rising sea level and increased frequency of extremeweather like storm events. A step to reduce emissions of CO2 and mitigateclimate change, for the property of Tagel, can be to adopt new silviculturalstrategies and analyse which is the most effective. As a result of that, threescenarios was produced, business-as-usual (BAU), increased set aside landand energy. An introduction of windpower at Tagels estate (property) andeffects on carbon balance was also examined. By using the Heureka systemand LCA-analysis in this study, it showed that the scenario of increased setaside land was the most efficient way to reduce carbon dioxide (CO2)emissions for the analysed period of 100 years.